logon is very slow

[Andras S. Haramasz]

Hi there;

I have Samba-2.2.7a configured as PDC.
I can login from Windows9x, NT, 2K, XP. My problem is with executing 
batch file at login time. 
My logon. bat is:
net time \\linux /set /yes
net use n: \\linux\netlogon /no
net use h: \\linux\homes /no
net use p: \\linux\public /no
net use t: \\linux\tmp /no
net use w: \\linux\Work /no
net use n: /d /y
(This file is generated using a perl script by preexec)

Adding drives takes its sweet time, at every drive. 
Here is section of the log (level 3)

  switch message SMBtconX (pid 3981)
[2003/02/27 20:51:18, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2003/02/27 20:51:18, 3] lib/access.c:check_access(318)
  check_access: no hostnames in host allow/deny list.
[2003/02/27 20:51:18, 2] lib/access.c:check_access(327)
  Allowed connection from  (192.168.1.115)
[2003/02/27 20:51:18, 3] smbd/password.c:authorise_login(735)
  authorise_login: ACCEPTED: validated uid ok as non-guest (user=Steve)
[2003/02/27 20:51:18, 3] smbd/service.c:make_connection(487)
  Connect path is /var/tmp
[2003/02/27 20:51:18, 3] smbd/sec_ctx.c:push_sec_ctx(296)
  push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2003/02/27 20:51:18, 3] smbd/uid.c:push_conn_ctx(285)
  push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2003/02/27 20:51:18, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2003/02/27 20:51:18, 3] smbd/sec_ctx.c:get_current_groups(172)
  get_current_groups: user is in 3 groups: 52, 51, 102
[2003/02/27 20:51:18, 3] smbd/sec_ctx.c:pop_sec_ctx(435)
  pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2003/02/27 20:51:18, 3] smbd/sec_ctx.c:get_current_groups(172)
  get_current_groups: user is in 3 groups: 52, 51, 102
[2003/02/27 20:51:18, 3] lib/util_seaccess.c:se_access_check(269)
  se_access_check: user sid is
S-1-5-21-1982542378-1830464510-1793467633-2022
[2003/02/27 20:51:18, 3] lib/util_seaccess.c:se_access_check(272)
  se_access_check: also S-1-5-21-1982542378-1830464510-1793467633-1105
[2003/02/27 20:51:18, 3] lib/util_seaccess.c:se_access_check(272)
  se_access_check: also S-1-5-21-1982542378-1830464510-1793467633-1103
[2003/02/27 20:51:18, 3] lib/util_seaccess.c:se_access_check(272)
  se_access_check: also S-1-5-21-1982542378-1830464510-1793467633-1205
[2003/02/27 20:51:18, 3] lib/util_seaccess.c:se_access_check(272)
  se_access_check: also S-1-1-0
[2003/02/27 20:51:18, 3] lib/util_seaccess.c:se_access_check(272)
  se_access_check: also S-1-5-2
[2003/02/27 20:51:18, 3] lib/util_seaccess.c:se_access_check(272)
  se_access_check: also S-1-5-11
[2003/02/27 20:51:18, 3] smbd/vfs.c:vfs_init_default(123)
  Initialising default vfs hooks     AT THIS POINT IT TIME OUT AND THEN
GOES TO THE NEXT DRIVE.

Time to time it fails too. From DOS, any command in the bat file can be
executed successfully and takes no time whatsoever. Accessing network
shares is pretty fast, also.
Any idea? Your help is appreciated.
Thanks Andras