help with Orinoco + RH 7.3 laptop

[Rakesh Arora]

Hi,

          I am trying to get the orinoco silver card running on my laptop running red hat 7.3. I had read that the card works with the default kernel (2.4.18-3) and built-in pcmcia card services. However when I insert the card, the card does not get an IP address. I have created a ifcfg-eth1 file under /etc/sysconfig/network-scripts. I have modified the ESSID field in wireless.opts to point to the SSID of my AP (WEP is off, so I commented the KEY field). I have downgraded the firmware to 6.06. iwconfig eth1 gives me the MAC address of the AP that I am associated with, but after a few minutes it shows 00:00:00:00:00:00. 

         dmesg shows that IRQs are being shared. Could that be the problem? If yes, how do I resolve it? Also in pcmcia file, PCIC is yenta_socket, should I change it to i82.... dmesg's output is below. Any help will be highly appreciated.

Thanks,

Rakesh

Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:03.0
PCI: Sharing IRQ 11 with 00:03.1
PCI: Sharing IRQ 11 with 00:07.2
PCI: Sharing IRQ 11 with 00:10.0
PCI: Sharing IRQ 11 with 00:10.1
PCI: Found IRQ 11 for device 00:03.1
PCI: Sharing IRQ 11 with 00:03.0
PCI: Sharing IRQ 11 with 00:07.2
PCI: Sharing IRQ 11 with 00:10.0
PCI: Sharing IRQ 11 with 00:10.1
Yenta IRQ list 0698, PCI irq11
Socket status: 30000006
Yenta IRQ list 0698, PCI irq11
Socket status: 30000010
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
hermes.c: 16 Jan 2002 David Gibson <hermes at gibson.dropbear.id.au>
orinoco.c 0.09b (David Gibson <hermes at gibson.dropbear.id.au> and others)
orinoco_cs.c 0.09b (David Gibson <hermes at gibson.dropbear.id.au> and others)
eth1: Station identity 001f:0001:0006:0006
eth1: Looks like a Lucent/Agere firmware version 6.06
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:02:2D:1B:52:81
eth1: Station name "HERMES I"
eth1: ready
eth1: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f
eth1: error -5 reading info frame. Frame dropped.
eth1: Tx error, status 4 (FID=00BF)

 



---------------------------------
Do you Yahoo!?
Yahoo! Web Hosting - establish your business online
-------------- next part --------------
HTML attachment scrubbed and removed