Orinoco and RH 7.2: close but no cigar
Mike Starnes
mstarnes7 at comcast.net
Wed May 1 08:16:37 EST 2002
Thanks Pavel, "ifconfig -a" does show eth0 but with no inet addr or Mask. The
RG-1100 doesn't issue ip's with dhcp when operating in bridge mode. Is there a
way to give eth0 a static ip address and netmask? I tried creating a
/etc/sysconfig/network-scripts/ifup-eth0 file using Orinoco's example for the
orinoco_cs driver but it didn't work with the wvlan_cs driver.
Pavel Roskin wrote:
>
> Hi, Mike!
>
> > But I can't ping anything, not even a local box on the lan. "ifconfig" and
> > "route" show only the lo interface. It seems like the card and driver are
> > working but has no ip address or route. How are these assigned to a wireless
> > card?
>
> "ifconfig -a" shows all interfaces, even those which are down. You should
> set the IP address and the netmask on the interface and bring it down.
>
> Most likely, you should just run a DHCP client of your choice: pump,
> dhclient, or dhcpcd. RedHat 7.2 has pump installed as /sbin/pump.
>
> > Am I correct in assuming it's almost working? Hoping to get this working
> > without recompiling the kernel or installing a new pcmcia package or
> > orinoco_cs. The laptop has no network connection other than floppy_net.
> > Think I read in this list's archives that this should work. All help
> > appreciated. Have RTFM, all that I can find, but still in the dark.
>
> The hardware is working already if you have a non-zero link quality. You
> just need to set up the network on the IP level.
>
> --
> Regards,
> Pavel Roskin
More information about the wireless
mailing list