help!

[Bin Ma]

Hi, all,

I was trying to set up my Lucent Orinoco silver card in Redhat 7.2. I did
the samething in Mandrake 8.1 and the card works perfect. But this did not
work in Redhat 7.2. I looked at the log file and found the error message
in hermes.conf:


ar  1 12:32:16 localhost pcmcia:  cardmgr.
ar  1 12:32:17 localhost cardmgr[735]: starting, version is 3.1.22
ar  1 12:32:17 localhost rc: Starting pcmcia:  succeeded
ar  1 12:32:17 localhost cardmgr[735]: config error, file './hermes.conf'
line
: no function bindings
ar  1 12:32:17 localhost cardmgr[735]: watching 2 sockets
ar  1 12:32:17 localhost kernel: cs: IO port probe 0x0c00-0x0cff: clean.
ar  1 12:32:17 localhost kernel: cs: IO port probe 0x0100-0x04ff:
excluding 0x1
0-0x117 0x220-0x22f 0x300-0x307 0x378-0x37f 0x388-0x38f 0x398-0x39f
0x4d0-0x4d7
ar  1 12:32:17 localhost kernel: cs: IO port probe 0x0a00-0x0aff: clean.
ar  1 12:32:17 localhost cardmgr[735]: initializing socket 0
ar  1 12:32:17 localhost kernel: cs: memory probe 0xa0000000-0xa0ffffff:
exclud
ng 0xa0000000-0xa00fffff
ar  1 12:32:17 localhost cardmgr[735]: socket 0: Lucent Technologies
Wavelan/IE
E
ar  1 12:32:17 localhost cardmgr[735]: executing: 'modprobe hermes'
ar  1 12:32:17 localhost kernel: hermes.c: 12 Dec 2000 David Gibson
<hermes at gib
on.dropbear.id.au>
ar  1 12:32:17 localhost cardmgr[735]: executing: 'modprobe orinoco_cs'
ar  1 12:32:18 localhost kernel: orinoco.c 0.06c (David Gibson
<hermes at gibson.d
opbear.id.au> and others)
Mar  1 12:32:18 localhost kernel: eth0: Firmware ID 1F vendor 0x1 (Lucent)
versi
on 6.06
Mar  1 12:32:18 localhost kernel: eth0: Ad-hoc demo mode supported.
Mar  1 12:32:18 localhost kernel: eth0: IEEE standard IBSS ad-hoc mode
supported
.
Mar  1 12:32:18 localhost kernel: eth0: WEP supported, "128"-bit key.
Mar  1 12:32:18 localhost kernel: eth0: MAC address 00:02:2D:0D:A9:CF
Mar  1 12:32:18 localhost kernel: eth0: Station name "HERMES I"
Mar  1 12:32:18 localhost kernel: eth0: ready
Mar  1 12:32:18 localhost cardmgr[735]: executing: './network start eth0'
Mar  1 12:32:18 localhost kernel: eth0: index 0x01: Vcc 5.0, irq 3, io
0x0180-0x
01bf
Mar  1 12:32:19 localhost cardmgr[735]: initializing socket 1
Mar  1 12:32:19 localhost cardmgr[735]: socket 1: 3Com 589 Ethernet


Please help!



Bin