Orinoco FW version

[Joseph R. Skoler]

Got it, thanks.

Looks like I'm running older firmware.  I went to Orinoco's web site and all
I could find was version 6.16.

Does the group think the problem of "eth1: Null event in orinoco_interrupt!"
is the card's firmware, the version of the Orinoco drivers (09) or an
interrupt conflict?

Any suggestions on how to fix would be most appreciated.

----------


Linux Tulip driver version 0.9.15-pre6 (July 2, 2001)
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
PCI: Enabling device 01:0c.0 (0000 -> 0002)
PCI: Found IRQ 11 for device 01:0c.0
PCI: Sharing IRQ 11 with 00:01.0
PCI: Sharing IRQ 11 with 01:08.0
Yenta IRQ list 0000, PCI irq11
Socket status: 10000011
Linux Tulip driver version 0.9.15-pre6 (July 2, 2001)
Linux Tulip driver version 0.9.15-pre6 (July 2, 2001)
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x378-0x37f
0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
hermes.c: 16 Jan 2002 David Gibson <hermes at gibson.dropbear.id.au>
orinoco.c 0.09b (David Gibson <hermes at gibson.dropbear.id.au> and others)
orinoco_cs.c 0.09b (David Gibson <hermes at gibson.dropbear.id.au> and others)
eth1: Station identity 001f:0001:0007:001c
eth1: Looks like a Lucent/Agere firmware version 7.28
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:02:2D:52:CE:7D
eth1: Station name "HERMES I"
eth1: ready
eth1: index 0x01: Vcc 5.0, irq 11, io 0x0100-0x013f



Joseph R. Skoler
joseph at compuhelp.com <mailto:joseph at compuhelp.com>
CompuHelp Technologies, Inc.
Computer Consulting, Network Solutions, Integration, Support
11 Lispenard Street   New York, NY  10013  212-995-2955
http://www.compuhelp.com



> -----Original Message-----
> From: Martin Pot [mailto:m.t.pot at ieee.org]
> Sent: Wednesday, June 12, 2002 7:00 AM
> To: Joseph R.Skoler; wireless at lists.samba.org
> Subject: Re: Orinoco FW version
>
>
> Joseph,  In a linux box, run "dmesg" after a reboot, and you
> should see something  like this:  eth3: Station identity
> 001f:0001:0006:0006 eth3: Looks like a Lucent/Agere firmware
> version 6.06 eth3: Ad-hoc demo mode supported eth3: IEEE
> standard IBSS ad-hoc mode supported eth3: WEP supported,
> 104-bit key eth3: MAC address 00:E0:63:82:FC:AD eth3: Station
> name "HERMES I" eth3: ready eth3: index 0x01: Vcc 5.0, irq 9,
> io 0x0180-0x01bf  Note that this is an Enterasys RoamAbout
> wireless card under RedHat 7.2,  using pcmcia-cs 3.1.34 beta.
>  Cheers, Martin.  > Can someone fill me in on how to check
> what firmware version I have on  the > Orinoco Gold. >  > For
> that matter, what is the latest version? >  > Thanks, >  >
> Joseph R. Skoler > joseph at compuhelp.com > CompuHelp
> Technologies, Inc. >  > Computer Consulting, Network
> Solutions, Integration, Support > 11 Lispenard Street   New
> York, NY  10013  212-995-2955 > http://www.compuhelp.com