Siemens I-Gate ?

[BJORKMAN MARTIN]

Goodmorning boys and girls!

I've a slight problem getting a Siemens I-Gate card working under linux
2.4.18. I use the lnwg-ng drivers which should work.

The card is a PCMCIA situated in a PCI->PCMCIA adapter.

I have the correct SSID, macadress of the AP, no irq conflicts, and so on
and so forth.

modprobe prism2_plx
wlanctl-ng wlan0 lnxreq_ifstate ifstate=enable
wlanctl-ng wlan0 lnxreq_autojoin ssid=1WAEH2KB00VI authtype=opensystem
ifconfig wlan0 137.223.140.141 netmask 255.255.254.0 broadcast
137.223.140.255
route add default gw 137.223.140.1

And an ifconfig gets me:
wlan0     Link encap:Ethernet  HWaddr 00:90:D1:00:6D:B5
          inet addr:137.223.140.141  Bcast:137.223.140.255
Mask:255.255.254.0
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:5 Base address:0x3400

dmesg doesn't reveal anything intressting at all, it finds the card and
everything seems to be fine..

Any ideas ?
Too bad Siemens doesn't support linux =/

--
Martin Bjørkman
Siemens support Norway 
Telefon: 22708400
Fax:     22708401
Int ext. 8919
"Kotae wa nai sa   Mayowasete gomen ne"