Orinoco card works, SMC 2632W doesn't

[Rakesh Arora]

Hi,
       Recently I got an Orinoco Silver card working
on my desktop using an Orinoco PCI adapter. I am using
kernel 2.4.16 and pcmcia-cs-3.1.29. However, my
SMC2632W card doesn't work with the same
configuration. The only change I have made is to the
wireless.opts file. The network.opts file is set up
correctly as are config.opts, ifcfg-eth1 etc. The
output of ifconfig, iwconfig and lsmod are as follows:

[root at localhost sysconfig]# iwconfig eth1
eth1      IEEE 802.11-DS  ESSID:"1e8146"  
Nickname:"localhost.localdomain"         
Frequency:2.412GHz  Sensitivity:1/3  Mode:Managed  
Access Point: 00:02:2D:1E:81:46
Bit Rate:11Mb/s   RTS thr:off   Fragment thr:off   
Power Management:off
Link quality:92/92  Signal level:2/153  Noise
level:108/153
Rx invalid nwid:0  invalid crypt:0  invalid misc:0
Segmentation fault (core dumped)


[root at localhost sysconfig]# ifconfig eth1
eth1      Link encap:Ethernet  HWaddr
00:04:E2:1E:05:57  
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100 
Interrupt:9 Base address:0x100 


[root at localhost /root]# lsmod
Module                  Size  Used by
orinoco_cs              4416   0 
orinoco                30160   0  [orinoco_cs]
hermes                  3328   0  [orinoco_cs orinoco]
ds                      6736   1  [orinoco_cs]
yenta_socket            8816   1 
pcmcia_core            39040   0  [orinoco_cs ds
yenta_socket]
3c59x                  25920   1  (autoclean)

I hope that someone in the list can tell me what I am
doing wrong and guide me in the right direction. 

Thanks a lot,
rakesh

__________________________________________________
Do You Yahoo!?
Send FREE video emails in Yahoo! Mail!
http://promo.yahoo.com/videomail/