[Samba] Joining Windows 10 Domain Member to Samba AD/DC

[Luis Peromarta]

This is correct. You should
Use chrony.

http://samba.bigbird.es/doku.php?id=samba:install-chrony
On 5 Jan 2024 at 08:23 +0000, Peter Milesson via samba <samba at lists.samba.org>, wrote:
>
>
> On 05.01.2024 1:28, Mark Foley via samba wrote:
> > I've added a Windows 10 domain member to my Domain. I'm now following the
> > procedure in https://wiki.samba.org/index.php/Time_Synchronisation#Configuring_Time_Synchronisation_on_a_Windows_Domain_Member.
> >
> > I've created the Group Policy for the "Time Sources". This doesn't seem to be
> > working. This did work fine with my old 4.8.2 DC, so I know it works in
> > principle.
> >
> > I have additional notes and have tried (on the Windows member):
> >
> > net stop w32time
> > w32tm /unregister
> > w32tm /register
> > net start w32time
> >
> > I've rebooted both the DC and the Windows member. On the Windows member I still
> > get:
> >
> > > w32tm /query /source
> > Local CMOS Clock
> >
> > whereas I expect the return to be "dc1.hprs.locl"
> >
> > I have confirmed that the Group Policy exists and is configured correctly.
> >
> > What's going wrong here?
> >
> > Thanks --Mark
> >
> Hi Mark,
>
> If you're using ntpsec on the DC, that wont work. You must use chrony. I
> had the same problem some half year ago.
>
> Also, no need to use a GPO for this. The domain members get their time
> from a DC anyway.
>
> HTH,
>
> Peter
>
>
>
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: https://lists.samba.org/mailman/options/samba