[Samba] Joining Windows 10 Domain Member to Samba AD/DC

[Sonic]

On Thu, Jan 4, 2024 at 7:46 PM Mark Foley via samba
<samba at lists.samba.org> wrote:
> I've added a Windows 10 domain member to my Domain. I'm now following the
> procedure in https://wiki.samba.org/index.php/Time_Synchronisation#Configuring_Time_Synchronisation_on_a_Windows_Domain_Member.
> What's going wrong here?

Is there some reason you need a GPO for this? By default the system
should get its time from the DC.
>From the page you refer to:
"Windows AD domain members will use any DC as their default time
source. If you have set up ntp on the DC as described on this page,
you usually do not need to reconfigure the clients. Alternative
configuration options for the clients are described below."

I've only used a GPO to point to a different time server when the DC
is incapable of providing the time service (older DC running in a
container).
Chris