[Samba] smbXsrv_client_connection_pass_loop: smb2srv_client_connection_passed() failed => NT_STATUS_OBJECT_NAME_NOT_FOUND

[Andrew Bartlett]

On Mon, 2022-09-19 at 11:26 +0100, Rowland Penny via samba wrote:

> I think you mean that Samba is running as a DC and there is only one
> DC.
> 
> You are using the DC as a fileserver, so did you read this:
> 
> https://wiki.samba.org/index.php/Setting_up_Samba_as_an_Active_Directory_Domain_Controller#Using_the_Domain_Controller_as_a_File_Server_.28Optional.29
> 
> 
> Where (amongst other things) it says this:
> 
> If you do use an AD DC as a fileserver, You must set the permissions 
> from Windows, do not attempt to use any of the old methods (force
> user 
> etc) . They will not work correctly and will cause problems.
> 
> I would suggest that you add another DC (for failover) and then a
> Unix 
> domain member and transfer the fileserver to that.
> 
> If you do not want to do that, remove all the extraneous config
> lines 
> from the shares (you only need the path and 'read only = no') and
> then 
> set the permissions from a Windows machine.
> 
> Rowland

While this is the standard advise, I'm confident it has no bearing on
the issue being faced, which is a generic fileserver issue. 

Andrew Bartlett


-- 
Andrew Bartlett (he/him)       https://samba.org/~abartlet/
Samba Team Member (since 2001) https://samba.org
Samba Team Lead, Catalyst IT   https://catalyst.net.nz/services/samba

Samba Development and Support, Catalyst IT - Expert Open Source
Solutions