[Samba] Debian Bullseye samba 4.16.1 online (amd64/arm64/armhf/i386)

[Ingo Asche]

Hi Louis,

thanks for your outstanding work...

Is there anything to consider when updating an existing installation? I 
tried first update my member server.

I just changed in /etc/apt/sources.list.d/van-belle.list 
bullseye-samba415 to bullseye-samba416 (OS is Rasperry OS Lite 64bit).

After apt update I get
16 packages can be upgraded. Run 'apt list --upgradable' to see them.

apt list --upgradable shows
libldb2/unknown 2:2.5.0+smb4.16.1-4nmu1~deb11+1 arm64 [upgradable from: 
2:2.4.2-0.1bullseye1]
libnss-winbind/unknown 2:4.16.1+dfsg-4nmu1~deb11+1 arm64 [upgradable 
from: 2:4.15.7+dfsg-0.1bullseye1]
libpam-winbind/unknown 2:4.16.1+dfsg-4nmu1~deb11+1 arm64 [upgradable 
from: 2:4.15.7+dfsg-0.1bullseye1]
libsmbclient/unknown 2:4.16.1+dfsg-4nmu1~deb11+1 arm64 [upgradable from: 
2:4.15.7+dfsg-0.1bullseye1]
libwbclient0/unknown 2:4.16.1+dfsg-4nmu1~deb11+1 arm64 [upgradable from: 
2:4.15.7+dfsg-0.1bullseye1]
python3-ldb/unknown 2:2.5.0+smb4.16.1-4nmu1~deb11+1 arm64 [upgradable 
from: 2:2.4.2-0.1bullseye1]
python3-samba/unknown 2:4.16.1+dfsg-4nmu1~deb11+1 arm64 [upgradable 
from: 2:4.15.7+dfsg-0.1bullseye1]
raspi-config/stable,stable 20220506 all [upgradable from: 20220425]
samba-common-bin/unknown 2:4.16.1+dfsg-4nmu1~deb11+1 arm64 [upgradable 
from: 2:4.15.7+dfsg-0.1bullseye1]
samba-common/unknown,unknown 2:4.16.1+dfsg-4nmu1~deb11+1 all [upgradable 
from: 2:4.15.7+dfsg-0.1bullseye1]
samba-dsdb-modules/unknown 2:4.16.1+dfsg-4nmu1~deb11+1 arm64 [upgradable 
from: 2:4.15.7+dfsg-0.1bullseye1]
samba-libs/unknown 2:4.16.1+dfsg-4nmu1~deb11+1 arm64 [upgradable from: 
2:4.15.7+dfsg-0.1bullseye1]
samba-vfs-modules/unknown 2:4.16.1+dfsg-4nmu1~deb11+1 arm64 [upgradable 
from: 2:4.15.7+dfsg-0.1bullseye1]
samba/unknown 2:4.16.1+dfsg-4nmu1~deb11+1 arm64 [upgradable from: 
2:4.15.7+dfsg-0.1bullseye1]
smbclient/unknown 2:4.16.1+dfsg-4nmu1~deb11+1 arm64 [upgradable from: 
2:4.15.7+dfsg-0.1bullseye1]
winbind/unknown 2:4.16.1+dfsg-4nmu1~deb11+1 arm64 [upgradable from: 
2:4.15.7+dfsg-0.1bullseye1]

After apt full-upgrade I get
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Calculating upgrade... Done
The following packages were automatically installed and are no longer 
required:
   dconf-gsettings-backend dconf-service glib-networking 
glib-networking-common glib-networking-services
   gsettings-desktop-schemas ibverbs-providers libarchive13 
libavahi-client3 libboost-iostreams1.74.0 libboost-thread1.74.0
   libcephfs2 libcups2 libdconf1 libgfapi0 libgfrpc0 libgfxdr0 
libglusterfs0 libibverbs1 libjson-glib-1.0-0
   libjson-glib-1.0-common libldb2 libproxy1v5 librados2 librdmacm1 
libsmbclient libsoup2.4-1 libstemmer0d libtdb1
   libtracker-sparql-2.0-0 python3-dnspython python3-gpg python3-ldb 
python3-markdown python3-pygments
   python3-requests-toolbelt python3-samba python3-talloc python3-tdb 
python3-yaml samba-common samba-dsdb-modules samba-libs
   samba-vfs-modules tdb-tools
Use 'apt autoremove' to remove them.
The following packages will be REMOVED:
   libnss-winbind libpam-winbind samba samba-common-bin smbclient winbind
The following packages will be upgraded:
   raspi-config samba-common
2 upgraded, 0 newly installed, 6 to remove and 0 not upgraded.
Need to get 199 kB of archives.
After this operation, 23.6 MB disk space will be freed.

This seems not correct to me and a update second that, Samba is no 
longer running on my machine, smbd for example is masked again.

Regards
Ingo
https://github.com/WAdama

L. van Belle via samba schrieb am 12.05.2022 um 16:19:
> Hai,
>
> As mentioned and later then normal.. Finaly there..
> Samba 4.16.1 is on my repo for debian Bullseye.
> You have choice these days, since the packages are now up2date
>
> If you need profiling-data and/or Gnome tracker support.
> Then you use my repo  *( https supported).
>
> *( you can copy past this).
> apt -y install apt-transport-https gnupg
> wget -O-https://apt.van-belle.nl/louis-van-belle.gpg-key.asc  |\
>      gpg --dearmor | sudo tee /usr/share/keyrings/louis-van-belle.gpg >
> /dev/null
> echo "# AptVanBelle repo for samba." | sudo tee -a
> /etc/apt/sources.list.d/van-belle.list
> echo "deb [arch=$(dpkg --print-architecture)
> signed-by=/usr/share/keyrings/louis-van-belle.gpg]
> http://apt.van-belle.nl/debian/  $(lsb_release -sc)-samba416 main" |\
>   sudo tee -a /etc/apt/sources.list.d/van-belle.list
>
> optional :
> echo "Acquire::Languages { "none"; };" |sudo tee -a
> /etc/apt/apt.conf.d/99disable-translations
> It saves me some messages in my logs, up2you..
>
> If you use pinning. You can use it as followed.
> apt-get install -t o=AptVanBelle packagename ...
>
> And if you don't need profiling-data and/or Gnome tracker support.
> Read :https://backports.debian.org/Instructions/  
>
> And add bullseye-backports :
> debhttp://deb.debian.org/debian  bullseye-backports main
> apt install -t bullseye-backports <packages>
>
> Enjoy,
> Other versions will be build soon.
>
>
> Greetz,
>
> Louis
>
>
>
>
>
>
>