[Samba] Debian Bullseye samba 4.16.1 online (amd64/arm64/armhf/i386)

[Kees van Vloten]

Hi Louis,

I am trying to upgrade to 4.16.2 with your repo (and without backports), 
the upgrade fails due to missing dependencies, the onces you mention 
below. Did you forget to add them to your repo or is there a good reason 
why it did not happen?

- Kees

Op 13-05-2022 om 08:48 schreef L.P.H. van Belle via samba:
> You have to Enable bullseye backports repo also.
> That will provide the needed depends for the samba pakcages.
>
> hmm, I see now its not handy to keep these depends in bullseye-backports.
> I'll do the depends also today and upload these to my repo.
> missing on my repo are talloc tdb and ldb packages.
>
>
> Greetz,
>
> Louis
>
>
>> -----Oorspronkelijk bericht-----
>> Van: samba Namens spindles seven via samba
>> Verzonden: donderdag 12 mei 2022 18:06
>> Aan: 'sambalist' <samba at lists.samba.org>
>> Onderwerp: Re: [Samba] Debian Bullseye samba 4.16.1 online
>> (amd64/arm64/armhf/i386)
>>
>> On 12 May 2022 15:20 L. van Belle wrote:
>>> Hai,
>>>
>>> As mentioned and later then normal.. Finaly there..
>>> Samba 4.16.1 is on my repo for debian Bullseye.
>>> You have choice these days, since the packages are now up2date
>>>
>> Hi Louis,
>> Have tried to update one of my servers from samba version 4.14.7 to 4.16.1
>> using your repo and I get the response that it will remove all the samba
>> modules rather than upgrading them.   Have tried it on two different boxes,
>> both with the same result:
>>
>> roy at moggy:~$ sudo apt-get dist-upgrade --autoremove Reading package
>> lists... Done Building dependency tree... Done Reading state information...
>> Done Calculating upgrade... Done The following packages will be REMOVED:
>>    libnss-winbind libpam-winbind libyaml-0-2 python3-dnspython python3-gpg
>>    python3-markdown python3-pygments python3-requests-toolbelt
>> python3-samba
>>    python3-tdb python3-yaml samba samba-common samba-common-bin
>> tdb-tools
>>    winbind
>> The following NEW packages will be installed:
>>    linux-image-5.10.0-13-amd64
>> The following packages will be upgraded:
>>    linux-image-amd64
>> 1 upgraded, 1 newly installed, 16 to remove and 0 not upgraded.
>> Need to get 53.8 MB of archives.
>> After this operation, 251 MB of additional disk space will be used.
>> Do you want to continue? [Y/n] n
>> Abort.
>>
>> All I did was to edit the van-belle.list file and run the apt-get update and apt-
>> get dist-upgrade commands.    I suspect a dependency is missing, but what?
>>
>> Regards,
>>
>> Roy Eastwood
>>
>>
>> --
>> To unsubscribe from this list go to the following URL and read the
>> instructions:  https://lists.samba.org/mailman/options/samba
>
>