[Samba] Van Belle repo - cannot install 4.16 on Debian 11

Fri Aug 5 11:01:50 UTC 2022

ouch, thankyou!

----- Original Message -----
> From: "samba" <samba at lists.samba.org>
> To: "samba" <samba at lists.samba.org>
> Sent: Thursday, August 4, 2022 5:31:34 PM
> Subject: Re: [Samba] Van Belle repo - cannot install 4.16 on Debian 11

> Have a look on Louis' mail from 12th of May in this list.
> 
> Subject : [Samba] Debian Bullseye samba 4.16.1 online
> (amd64/arm64/armhf/i386)
> 
> There he has written some instructions for the 4.16 packages...
> 
> Regards
> Ingo
> https://github.com/WAdama
> 
> Rowland Penny via samba schrieb am 04.08.2022 um 17:14:
>> On Thu, 2022-08-04 at 17:09 +0200, Lorenzo Milesi via samba wrote:
>>> Hi.
>>> Fresh Debian 11 install.
>>>
>>> I configured apt with this repo:
>>>
>>> deb [arch=amd64 signed-by=/usr/share/keyrings/louis-van-belle.gpg]
>>> http://apt.van-belle.nl/debian/ bullseye-samba416 main
>>>
>>> But when attempting install:
>>>
>>> # apt install acl attr samba samba-dsdb-modules samba-vfs-modules
>>> winbind libpam-winbind libnss-winbind libpam-krb5 krb5-config krb5-
>>> user
>>> Reading package lists... Done
>>> Building dependency tree... Done
>>> Reading state information... Done
>>> Some packages could not be installed. This may mean that you have
>>> requested an impossible situation or if you are using the unstable
>>> distribution that some required packages have not yet been created
>>> or been moved out of Incoming.
>>> The following information may help to resolve the situation:
>>>
>>> The following packages have unmet dependencies:
>>>   libpam-winbind : Depends: libtalloc2 (>= 2.3.3-3~) but it is not
>>> going to be installed
>>>   samba : Depends: python3-samba but it is not going to be installed
>>>           Depends: samba-common-bin (= 2:4.16.2+dfsg-1nmu1~deb11.1)
>>> but it is not going to be installed
>>>           Depends: libldb2 (>= 0.9.21) but it is not going to be
>>> installed
>>>           Depends: libtalloc2 (>= 2.3.3-3~) but it is not going to be
>>> installed
>>>           Depends: libtdb1 (>= 1.4.6-2~) but 1.4.3-1+b1 is to be
>>> installed
>>>           Depends: libtevent0 (>= 0.11.0~) but it is not going to be
>>> installed
>>>           Depends: samba-libs (= 2:4.16.2+dfsg-1nmu1~deb11.1) but it
>>> is not going to be installed
>>>           Recommends: python3-markdown but it is not going to be
>>> installed
>>>   samba-dsdb-modules : Depends: samba-libs (= 2:4.16.2+dfsg-
>>> 1nmu1~deb11.1) but it is not going to be installed
>>>                        Depends: libldb2 (= 2:2.5.1+samba4.16.2-
>>> 1nmu1~deb11.1) but it is not going to be installed
>>>                        Depends: libtalloc2 (>= 2.3.3-3~) but it is not
>>> going to be installed
>>>                        Depends: libtdb1 (>= 1.4.6-2~) but 1.4.3-1+b1
>>> is to be installed
>>>                        Depends: libtevent0 (>= 0.11.0~) but it is not
>>> going to be installed
>>>   samba-vfs-modules : Depends: samba-libs (= 2:4.16.2+dfsg-
>>> 1nmu1~deb11.1) but it is not going to be installed
>>>                       Depends: libtalloc2 (>= 2.3.3-3~) but it is not
>>> going to be installed
>>>                       Depends: libtdb1 (>= 1.4.6-2~) but 1.4.3-1+b1 is
>>> to be installed
>>>                       Depends: libtevent0 (>= 0.11.0~) but it is not
>>> going to be installed
>>>                       Recommends: libcephfs2 (>= 12.0.3) but it is not
>>> going to be installed
>>>                       Recommends: libgfapi0 (>= 9.2) but it is not
>>> going to be installed
>>>   winbind : Depends: samba-common-bin (= 2:4.16.2+dfsg-1nmu1~deb11.1)
>>> but it is not going to be installed
>>>             Depends: libtalloc2 (>= 2.3.3-3~) but it is not going to
>>> be installed
>>>             Depends: libtdb1 (>= 1.4.6-2~) but 1.4.3-1+b1 is to be
>>> installed
>>>             Depends: libtevent0 (>= 0.11.0~) but it is not going to be
>>> installed
>>>             Depends: samba-libs (= 2:4.16.2+dfsg-1nmu1~deb11.1) but it
>>> is not going to be installed
>>> E: Unable to correct problems, you have held broken packages.
>>>
>>> 4.15 works fine.
>> You need the Debian backports repo as well.
>>
>> Rowland
>>
>>
>>
> 
> 
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba

-- 
Lorenzo Milesi - lorenzo.milesi at yetopen.com 
CTO @ YetOpen Srl
YetOpen - https://www.yetopen.com/

Corso Martiri della Liberazione 114 - 23900 Lecco - ITALY - | 4801 Glenwood Avenue - Suite 200 - Raleigh, NC 27612 - USA -
Tel +39 0341 220 205 - info.it at yetopen.com  | Phone +1 919-817-8106 - info.us at yetopen.com

Think green - Non stampare questa e-mail se non necessario / Don't print this email unless necessary

-------- D.Lgs. 196/2003 e GDPR 679/2016 --------
Tutte le informazioni contenute in questo messaggio sono riservate ed a uso esclusivo del destinatario.
Tutte le informazioni ivi contenute, compresi eventuali allegati, sono da ritenere confidenziali e riservate secondo i termini
del vigente D.Lgs. 196/2003 in materia di privacy e del Regolamento europeo 679/2016 - GDPR - e quindi ne e' proibita l'utilizzazione ulteriore non autorizzata.
Nel caso in cui questo messaggio Le fosse pervenuto per errore, La invitiamo ad eliminarlo senza copiarlo, stamparlo, a non inoltrarlo a terzi e ad avvertirci non appena possibile.
Grazie.

Confidentiality notice: this email message including any attachment is for the sole use of the intended recipient and may contain confidential and privileged information;
pursuant to Legislative Decree 196/2003 and the European General Data Protection Regulation 679/2016 - GDPR - any unauthorized review, use, disclosure or distribution
is prohibited. If you are not the intended recepient please delete this message without copying, printing or forwarding it to others, and alert us as soon as possible.
Thank you.