[Samba] Acls
Philip Offermans
mail at philipoffermans.nl
Sat Sep 5 16:22:21 UTC 2020
Sorry my mistake. The output is
domain admins:x:70009:
> On 5 Sep 2020, at 18:21, Philip Offermans <mail at philipoffermans.nl> wrote:
>
> The output is:
> getent group 'domain admins’
>
> Copying without understanding what it does is not smart I know. But sometimes you will understand it later. And atm I am using a test setup.
>
> Here are is all the info you need:
>
> Main AD:
> Collected config --- 2020-09-05-18:16 -----------
>
> Hostname: gaia
> DNS Domain: rompen.local
> FQDN: gaia.rompen.local
> ipaddress: 192.168.88.2
>
> -----------
>
> Kerberos SRV _kerberos._tcp.rompen.local record verified ok, sample output:
> Server: 192.168.88.2
> Address: 192.168.88.2#53
>
> _kerberos._tcp.rompen.local service = 0 100 88 gaia.rompen.local.
> Samba is running as an AD DC
>
> -----------
> Checking file: /etc/os-release
>
> PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
> NAME="Raspbian GNU/Linux"
> VERSION_ID="10"
> VERSION="10 (buster)"
> VERSION_CODENAME=buster
> ID=raspbian
> ID_LIKE=debian
> HOME_URL="http://www.raspbian.org/ <http://www.raspbian.org/>"
> SUPPORT_URL="http://www.raspbian.org/RaspbianForums <http://www.raspbian.org/RaspbianForums>"
> BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs <http://www.raspbian.org/RaspbianBugs>"
>
> -----------
>
>
> This computer is running Debian 10.4 armv7l
>
> -----------
> running command : ip a
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> inet 127.0.0.1/8 scope host lo
> inet6 ::1/128 scope host
> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
> link/ether b8:27:eb:7f:ad:98 brd ff:ff:ff:ff:ff:ff
> inet 192.168.88.2/24 brd 192.168.88.255 scope global dynamic noprefixroute eth0
> valid_lft 568sec preferred_lft 493sec
> inet6 fe80::bbbd:eb9b:bce9:b088/64 scope link
> 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
> link/ether b8:27:eb:2a:f8:cd brd ff:ff:ff:ff:ff:ff
>
> -----------
> Checking file: /etc/hosts
>
> 127.0.0.1 localhost
> ::1 localhost ip6-localhost ip6-loopback
> ff02::1 ip6-allnodes
> ff02::2 ip6-allrouters
>
> 127.0.1.1 gaia.rompen.local gaia
>
> -----------
>
> Checking file: /etc/resolv.conf
>
> # Generated by resolvconf
> search rompen.local
> nameserver 192.168.88.2
>
> -----------
>
> Checking file: /etc/krb5.conf
>
> [libdefaults]
> default_realm = ROMPEN.LOCAL
> dns_lookup_realm = false
> dns_lookup_kdc = true
>
> -----------
>
> Checking file: /etc/nsswitch.conf
>
> # /etc/nsswitch.conf
> #
> # Example configuration of GNU Name Service Switch functionality.
> # If you have the `glibc-doc-reference' and `info' packages installed, try:
> # `info libc "Name Service Switch"' for information about this file.
>
> passwd: files
> group: files
> shadow: files
> gshadow: files
>
> hosts: files mdns4_minimal [NOTFOUND=return] dns
> networks: files
>
> protocols: db files
> services: db files
> ethers: db files
> rpc: db files
>
> netgroup: nis
>
> -----------
>
> Checking file: /etc/samba/smb.conf
>
> # Global parameters
> [global]
> dns forwarder = 8.8.8.8
> netbios name = GAIA
> realm = ROMPEN.LOCAL
> server role = active directory domain controller
> workgroup = ROMPEN
> idmap_ldb:use rfc2307 = yes
> wins support = yes
>
> [netlogon]
> path = /var/lib/samba/sysvol/rompen.local/scripts
> read only = No
>
> [sysvol]
> path = /var/lib/samba/sysvol
> read only = No
>
> -----------
>
> BIND_DLZ not detected in smb.conf
>
> -----------
>
> Installed packages:
> ii attr 1:2.4.48-4 armhf utilities for manipulating filesystem extended attributes
> ii krb5-config 2.6 all Configuration files for Kerberos Version 5
> ii krb5-locales 1.17-3 all internationalization support for MIT Kerberos
> ii krb5-user 1.17-3 armhf basic programs to authenticate using MIT Kerberos
> ii libacl1:armhf 2.2.53-4 armhf access control list - shared library
> ii libattr1:armhf 1:2.4.48-4 armhf extended attribute handling - shared library
> ii libgssapi-krb5-2:armhf 1.17-3 armhf MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
> ii libkrb5-3:armhf 1.17-3 armhf MIT Kerberos runtime libraries
> ii libkrb5support0:armhf 1.17-3 armhf MIT Kerberos runtime libraries - Support library
> ii libnss-winbind:armhf 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf Samba nameservice integration plugins
> ii libpam-winbind:armhf 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf Windows domain authentication integration plugin
> ii libsmbclient:armhf 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf shared library for communication with SMB/CIFS servers
> ii libwbclient0:armhf 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf Samba winbind client library
> ii python-samba 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf Python bindings for Samba
> ii samba 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf SMB/CIFS file, print, and login server for Unix
> ii samba-common 2:4.9.5+dfsg-5+deb10u1+rpi1 all common files used by both the Samba server and client
> ii samba-common-bin 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf Samba common files used by both the server and the client
> ii samba-dsdb-modules:armhf 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf Samba Directory Services Database
> ii samba-libs:armhf 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf Samba core libraries
> ii samba-testsuite 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf test suite from Samba
> ii samba-vfs-modules:armhf 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf Samba Virtual FileSystem plugins
> ii smbclient 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf command-line SMB/CIFS clients for Unix
> ii winbind 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf service to resolve user and group information from Windows NT servers
>
>
> Member server:
>
> Collected config --- 2020-09-05-18:15 -----------
>
> Hostname: dna
> DNS Domain: rompen.local
> FQDN: dna.rompen.local
> ipaddress: 192.168.88.3
>
> -----------
>
> Kerberos SRV _kerberos._tcp.rompen.local record verified ok, sample output:
> Server: 192.168.88.2
> Address: 192.168.88.2#53
>
> _kerberos._tcp.rompen.local service = 0 100 88 gaia.rompen.local.
> Samba is running as a Unix domain member
>
> -----------
> Checking file: /etc/os-release
>
> PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
> NAME="Raspbian GNU/Linux"
> VERSION_ID="10"
> VERSION="10 (buster)"
> VERSION_CODENAME=buster
> ID=raspbian
> ID_LIKE=debian
> HOME_URL="http://www.raspbian.org/ <http://www.raspbian.org/>"
> SUPPORT_URL="http://www.raspbian.org/RaspbianForums <http://www.raspbian.org/RaspbianForums>"
> BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs <http://www.raspbian.org/RaspbianBugs>"
>
> -----------
>
>
> This computer is running Debian 10.4 armv7l
>
> -----------
> running command : ip a
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> inet 127.0.0.1/8 scope host lo
> inet6 ::1/128 scope host
> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
> link/ether b8:27:eb:97:db:d8 brd ff:ff:ff:ff:ff:ff
> inet 192.168.88.3/24 brd 192.168.88.255 scope global dynamic noprefixroute eth0
> valid_lft 562sec preferred_lft 487sec
> inet6 fe80::e85c:b84c:8f64:eb20/64 scope link
> 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
> link/ether b8:27:eb:c2:8e:8d brd ff:ff:ff:ff:ff:ff
>
> -----------
> Checking file: /etc/hosts
>
> 192.168.88.3 dna.rompen.local dna
> 127.0.0.1 localhost
> ::1 localhost ip6-localhost ip6-loopback
> ff02::1 ip6-allnodes
> ff02::2 ip6-allrouters
>
> -----------
>
> Checking file: /etc/resolv.conf
>
> # Generated by resolvconf
> domain rompen.local
> nameserver 192.168.88.2
>
> -----------
>
> Checking file: /etc/krb5.conf
>
> [libdefaults]
> default_realm = ROMPEN.LOCAL
> dns_lookup_realm = false
> dns_lookup_kdc = true
>
> -----------
>
> Checking file: /etc/nsswitch.conf
>
> # /etc/nsswitch.conf
> #
> # Example configuration of GNU Name Service Switch functionality.
> # If you have the `glibc-doc-reference' and `info' packages installed, try:
> # `info libc "Name Service Switch"' for information about this file.
>
> passwd: files winbind
> group: files winbind
> shadow: files
> gshadow: files
>
> hosts: files mdns4_minimal [NOTFOUND=return] dns
> networks: files
>
> protocols: db files
> services: db files
> ethers: db files
> rpc: db files
>
> netgroup: nis
>
> -----------
>
> Checking file: /etc/samba/smb.conf
>
> [global]
> netbios name = DNA
> workgroup = ROMPEN
> security = ADS
> realm = ROMPEN.LOCAL
> encrypt passwords = yes
>
> acl allow execute always = yes
>
> idmap config *:backend = tdb
> idmap config *:range = 3000-7999
> idmap config ROMPEN:backend = rid
> #idmap config ROMPEN:schema_mode = rfc2307
> idmap config ROMPEN:range = 10000-40000
>
> winbind refresh tickets = Yes
> vfs objects = acl_xattr
> map acl inherit = Yes
> store dos attributes = Yes
>
> dedicated keytab file = /etc/krb5.keytab
> kerberos method = secrets and keytab
>
> winbind use default domain = yes
>
> winbind enum users = yes
> winbind enum groups = yes
>
> username map = /etc/samba/user.map
> dedicated keytab file = /etc/krb5.keytab
> kerberos method = secrets and keytab
>
> vfs objects = acl_xattr
> map acl inherit = Yes
> store dos attributes = Yes
>
> username map = /etc/samba/user.map
>
> admin users = administrator
> [share]
> path = /nas
> read only = no
> inherit acls = yes
>
> [users]
> path = /usr/home
> comment = a comment
> browseable = yes
> read only = no
> inherit acls = yes
> inherit permissions = yes
> create mask = 700
> directory mask = 700
> valid users = @"ROMPEN+Domain Users" <-- define your ADS groups
> admin users = @"ROMPEN+Domain Admins" <-- define your ads groups with admin rights
>
> -----------
>
> Running as Unix domain member and no user.map detected.
> This is possible with an auth-only setup, checking also for NFS parts
> -----------
> Checking file: /etc/idmapd.conf
>
> [General]
>
> Verbosity = 0
> Pipefs-Directory = /run/rpc_pipefs
> # set your own domain here, if it differs from FQDN minus hostname
> # Domain = localdomain
>
> [Mapping]
>
> Nobody-User = nobody
> Nobody-Group = nogroup
>
> -----------
>
>
> Installed packages:
> ii acl 2.2.53-4 armhf access control list - utilities
> ii attr 1:2.4.48-4 armhf utilities for manipulating filesystem extended attributes
> ii krb5-config 2.6 all Configuration files for Kerberos Version 5
> ii krb5-user 1.17-3 armhf basic programs to authenticate using MIT Kerberos
> ii libacl1:armhf 2.2.53-4 armhf access control list - shared library
> ii libattr1:armhf 1:2.4.48-4 armhf extended attribute handling - shared library
> ii libgssapi-krb5-2:armhf 1.17-3 armhf MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
> ii libkrb5-3:armhf 1.17-3 armhf MIT Kerberos runtime libraries
> ii libkrb5support0:armhf 1.17-3 armhf MIT Kerberos runtime libraries - Support library
> ii libnfsidmap2:armhf 0.25-5.1 armhf NFS idmapping library
> ii libnss-winbind:armhf 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf Samba nameservice integration plugins
> ii libpam-winbind:armhf 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf Windows domain authentication integration plugin
> ii libwbclient0:armhf 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf Samba winbind client library
> ii nfs-common 1:1.3.4-2.5+deb10u1 armhf NFS support files common to client and server
> ii python-samba 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf Python bindings for Samba
> ii samba 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf SMB/CIFS file, print, and login server for Unix
> ii samba-common 2:4.9.5+dfsg-5+deb10u1+rpi1 all common files used by both the Samba server and client
> ii samba-common-bin 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf Samba common files used by both the server and the client
> ii samba-dsdb-modules:armhf 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf Samba Directory Services Database
> ii samba-libs:armhf 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf Samba core libraries
> ii samba-vfs-modules:armhf 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf Samba Virtual FileSystem plugins
> ii winbind 2:4.9.5+dfsg-5+deb10u1+rpi1 armhf service to resolve user and group information from Windows NT servers
>
> -----------
>
>
> Philip
>
>
>
>> On 4 Sep 2020, at 19:23, Rowland penny via samba <samba at lists.samba.org <mailto:samba at lists.samba.org>> wrote:
>>
>> getent group 'domain admins'
>
More information about the samba
mailing list