[Samba] [PATCH] Re: Failing replication

Alexander Harm alexander.harm at apfel-q.de
Tue Mar 3 11:39:44 UTC 2020


Exactly!




On 3. March 2020 at 11:07:02, L.P.H. van Belle via samba (samba at lists.samba.org) wrote:

Just to confirm this.  
Im guessing you use this part :  

> For the DsREplicatSync error, i would suggest these steps first.  
> DC2, change the resolv.conf, set DC1 first, then DC2, reboot.  
> Wait 5 min, now check replication again, if its ok, now you can change > the resolv.conf back.  

Greetz,  

Louis  


> -----Oorspronkelijk bericht-----  
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens  
> Alexander Harm via samba  
> Verzonden: dinsdag 3 maart 2020 10:35  
> Aan: samba at lists.samba.org  
> Onderwerp: Re: [Samba] [PATCH] Re: Failing replication  
>  
> OK, found this post from Louis and this fixed it for me.  
>  
> https://lists.samba.org/archive/samba/2019-April/222278.html  
>  
> @Andrew: thanks so much for your time, effort and support the  
> last days!  
>  
> Alexander  
>  
>  
>  
>  
> On 3. March 2020 at 10:01:59, Alexander Harm  
> (alexander.harm at apfel-q.de) wrote:  
>  
> That did the trick for manual replication via  
>  
> samba-tool drs replicate dc02 dc01 dc=ds,dc=example,dc=com  
> --sync-all --local -d 9  
>  
> However, if I run samba-tool drs showrepl it shows me a  
>  
> result 1326 (WERR_LOGON_FAILURE)  
>  
> and also  
>  
> samba-tool drs replicate dc02 dc01 dc=ds,dc=example,dc=com --full-sync  
>  
> fails with the same error.  
>  
> How can I fix this?  
>  
>  
>  
>  
> On 3. March 2020 at 04:23:02, Andrew Bartlett  
> (abartlet at samba.org) wrote:  
>  
> I think I have this finally fixed here:  
>  
> https://gitlab.com/samba-team/samba/-/merge_requests/1189  
> https://gitlab.com/samba-team/samba/-/merge_requests/1189.patch  
>  
> Thanks for your patience,  
>  
> Andrew Bartlett  
>  
> On Mon, 2020-03-02 at 09:18 +0100, Alexander Harm wrote:  
> > Hi Andrew,  
> >  
> > that is great news. Thanks so much for your support through this.  
> >  
> > Alexander  
> >  
> >  
> >  
> >  
> > On 2. March 2020 at 09:09:01, Andrew Bartlett (abartlet at samba.org)  
> > wrote:  
> >  
> > > You can just join a new DC and demote the failing one, or the  
> > > reverse,  
> > > demote the failing one and rejoin it.  
> > >  
> > > However I'm pretty close to a patch and have a test that  
> > > reproduces  
> > > this locally, so expect some good news soon.  
> > >  
> > > Andrew Bartlett  
> > >  
> > > On Sat, 2020-02-29 at 12:27 +0100, Alexander Harm wrote:  
> > > > Question: is there a possibility to delete the current  
> records of  
> > > a dc and resync from the master? Like not applying the diff of a  
> > > replication but just wipe the whole thing and replicate from  
> > > scratch?  
> > > >  
> > > >  
> > > >  
> > > >  
> > > > On 29. February 2020 at 09:23:12, Alexander Harm (  
> > > alexander.harm at apfel-q.de) wrote:  
> > > >  
> > > > > Hi Andrew,  
> > > > >  
> > > > > I guess there is a typo in your request. Find attached the  
> > > output of the following queries:  
> > > > >  
> > > > > 1: ldbsearch -H /var/lib/samba/private/sam.ldb -s sub  
> > > 'CN=cfc3ffe7-22b1-4ae3-aef4-4414a3456041' --show-deleted  
> > > > > 2: ldbsearch -H /var/lib/samba/private/sam.ldb -s sub  
> > >  
> 'CN=cfc3ffe7-22b1-4ae3-aef4-4414a3456041\0ADEL:613f15ca-58c0-4304-  
> > > 83e6-cfcfdae11bc4' --show-deleted  
> > > > > 3: ldbsearch -H /var/lib/samba/private/sam.ldb -s base -b  
> > >  
> 'CN=cfc3ffe7-22b1-4ae3-aef4-4414a3456041\0ADEL:613f15ca-58c0-4304-  
> > > 83e6-cfcfdae11bc4,CN=Deleted Objects,DC=ds,DC=craze,DC=toys' --  
> > > show-deleted  
> > > > > Looks like DC01 cannot move the device from registered to  
> > > deleted, no?  
> > > > >  
> > > > > Alexander  
> > > > >  
> > > > >  
> > > > >  
> > > > >  
> > > > > On 29. February 2020 at 08:57:01, Andrew Bartlett (  
> > > abartlet at samba.org) wrote:  
> > > > >  
> > > > > > Can you show me the full contents of:  
> > > > > >  
> > > > > >  
> 'CN=cfc3ffe7-22b1-4ae3-aef4-4414a3456041\0ADEL:613f15ca-58c0-  
> > > 4304-83e6-  
> > > > > > cfcfdae11bc4,CN=Deleted Objects,DC=ds,DC=craze,DC=toys'  
> > > > > >  
> > > > > > eg  
> > > > > >  
> > > > > > ldbsearch -H sam.ldb -s base -b  
> 'CN=cfc3ffe7-22b1-4ae3-aef4-  
> > > > > > 4414a3456041\0ADEL:613f15ca-58c0-4304-83e6-  
> > > cfcfdae11bc4,CN=Deleted  
> > > > > > Objects,DC=ds,DC=craze,DC=toys' --show-deleted  
> > > > > >  
> > > > > > I'm trying to understand what  
> msDS-KeyCredentialLink is set  
> > > to before  
> > > > > > we start, as this is where problem starts (I think).  
> > > > > >  
> > > > > > Andrew Bartlett  
> > > > > >  
> > > > > > On Fri, 2020-02-28 at 23:26 +0100, Alexander Harm wrote:  
> > > > > > > Hi Andrew,  
> > > > > > >  
> > > > > > > attached the three debug outputs.  
> > > > > > >  
> > > > > > > dc01: already existing Samba DC which showed the  
> problems  
> > > > > > > dc03: new Samba DC to see if problems could be worked  
> > > around by setting up new DCs  
> > > > > > > your patches are applied to both  
> > > > > > > The chronological order as follows:  
> > > > > > >  
> > > > > > > debug_dc01_repfrom_winad.txt: I get auth errors for some  
> > > reason when trying to replicate from Windows AD  
> > > > > > > debug_dc03_repfrom_winad.txt: I then tried to  
> replicate the  
> > > new DC  
> > > > > > > debug_dc01_repfrom_dc03.txt: Tried to replicate dc03 to  
> > > dc01 to work around the auth errors concerning the AD  
> > > > > > > Does this help you further? Can you confirm that  
> dc03 works  
> > > in fact fine?  
> > > > > > >  
> > > > > > > Alexander  
> > > > > > >  
> > > > > > >  
> > > > > > >  
> > > > > > >  
> > > > > > > On 28. February 2020 at 21:45:04, Andrew Bartlett (  
> > > abartlet at samba.org) wrote:  
> > > > > > >  
> > > > > > > > I attached the patch.  
> > > > > > > >  
> > > > > > > > That, and another one (from my own attempts to  
> reproduce  
> > > by manually  
> > > > > > > > corrupting the DB), are here:  
> > > > > > > >  
> > > > > > > >  
> > > https://gitlab.com/samba-team/samba/-/merge_requests/1181.patch  
> > > > > > > >  
> > > > > > > > Andrew Bartlett  
> > > > > > > >  
> > > > > > > > On Fri, 2020-02-28 at 21:39 +0100, Alexander  
> Harm wrote:  
> > > > > > > > > I am apparently too stupid to just download the  
> > > diff/patch from gitlab…  
> > > > > > > > >  
> > > > > > > > >  
> > > > > > > > >  
> > > > > > > > >  
> > > > > > > > > On 28. February 2020 at 21:37:02, Andrew Bartlett (  
> > > abartlet at samba.org) wrote:  
> > > > > > > > >  
> > > > > > > > > > The new patch on it's own and with the  
> earlier patch  
> > > (to make it non-  
> > > > > > > > > > critical) would be helpful. There are  
> multiple errors  
> > > here and we need  
> > > > > > > > > > good debugging for both.  
> > > > > > > > > >  
> > > > > > > > > > Andrew Bartlett  
> > > > > > > > > >  
> > > > > > > > > > On Fri, 2020-02-28 at 21:29 +0100, Alexander Harm  
> > > wrote:  
> > > > > > > > > > > Sorry, was a bit confused myself. I will  
> apply your  
> > > patch and report the result. Just to confirm, we speak about  
> > > ebd9bee3 (which I already applied) and now 609181e0?  
> > > > > > > > > > >  
> > > > > > > > > > >  
> > > > > > > > > > >  
> > > > > > > > > > >  
> > > > > > > > > > > On 28. February 2020 at 21:12:01, Andrew  
> Bartlett  
> > > via samba (samba at lists.samba.org) wrote:  
> > > > > > > > > > >  
> > > > > > > > > > > > I'm pretty swamped with other community  
> support  
> > > issues, which is why it  
> > > > > > > > > > > > is taking so long to get back to you.  
> > > > > > > > > > > >  
> > > > > > > > > > > > It would at least be interesting to see the  
> > > results after you apply  
> > > > > > > > > > > > this patch (on master, but might backport  
> > > cleanly).  
> > > > > > > > > > > >  
> > > > > > > > > > > > If it works for you (in terms of giving useful  
> > > information) I'll  
> > > > > > > > > > > > propose it for a future Samba version.  
> Still not  
> > > a fix for the actual  
> > > > > > > > > > > > issue, but it might tell us what is going on.  
> > > > > > > > > > > >  
> > > > > > > > > > > > Thanks,  
> > > > > > > > > > > >  
> > > > > > > > > > > > Andrew Bartlett  
> > > > > > > > > > > >  
> > > > > > > > > > > > On Mon, 2020-02-24 at 08:29 +0100,  
> Alexander Harm  
> > > via samba wrote:  
> > > > > > > > > > > > > Hi Andrew,  
> > > > > > > > > > > > >  
> > > > > > > > > > > > > thanks for your feedback. What are my  
> options  
> > > now? Nuke the whole thing?  
> > > > > > > > > > > > >  
> > > > > > > > > > > > > Alexander  
> > > > > > > > > > > > >  
> > > > > > > > > > > > >  
> > > > > > > > > > > > >  
> > > > > > > > > > > > >  
> > > > > > > > > > > > > On 24. February 2020 at 02:08:02, Andrew  
> > > Bartlett via samba (samba at lists.samba.org) wrote:  
> > > > > > > > > > > > >  
> > > > > > > > > > > > > G'Day Alexander,  
> > > > > > > > > > > > >  
> > > > > > > > > > > > > This is looking trickier than I had hoped. I  
> > > don't think the patch I  
> > > > > > > > > > > > > included is the right approach, and I can't  
> > > reproduce what I thought  
> > > > > > > > > > > > > was the issue on master.  
> > > > > > > > > > > > >  
> > > > > > > > > > > > > I've added a test in MR  
> > > > > > > > > > > > >  
> > > https://gitlab.com/samba-team/samba/-/merge_requests/1128  
> but that  
> > > just  
> > > > > > > > > > > > > shows that what we were doing still  
> works, so  
> > > it isn't terribly useful  
> > > > > > > > > > > > > in your case.  
> > > > > > > > > > > > >  
> > > > > > > > > > > > > I'm sorry that I don't have a really  
> good next  
> > > step, something DB-  
> > > > > > > > > > > > > specific appears to be going on,  
> particularly  
> > > as you then get another  
> > > > > > > > > > > > > error once we fix this one.  
> > > > > > > > > > > > >  
> > > > > > > > > > > > > Sorry!  
> > > > > > > > > > > > >  
> > > > > > > > > > > > > Andrew Bartlett  
> > > > > > > > > > > > >  
> > > > > > > > > > > > > On Sat, 2020-02-08 at 12:29 +1300, Andrew  
> > > Bartlett via samba wrote:  
> > > > > > > > > > > > > > Thanks. At this stage is looks like  
> a bug in  
> > > the repl_meta_data  
> > > > > > > > > > > > > > module.  
> > > > > > > > > > > > > >  
> > > > > > > > > > > > > > Try the attached patch.  
> > > > > > > > > > > > > >  
> > > > > > > > > > > > > > Can I name you in the bug and is there any  
> > > affiliation (eg employer)  
> > > > > > > > > > > > > > you would like named?  
> > > > > > > > > > > > > >  
> > > > > > > > > > > > > > I've filed a bug and will file a merge  
> > > request once I have a test to  
> > > > > > > > > > > > > > confirm this.  
> > > > > > > > > > > > > >  
> > > > > > > > > > > > > >  
> > > https://bugzilla.samba.org/show_bug.cgi?id=14272  
> > > > > > > > > > > > > >  
> > > > > > > > > > > > > > Thanks!  
> > > > > > > > > > > > > >  
> > > > > > > > > > > > > > Andrew Bartlett  
> > > > > > > > > > > > > >  
> > > > > > > > > > > > > > On Fri, 2020-02-07 at 23:34 +0100,  
> Alexander  
> > > Harm via samba wrote:  
> > > > > > > > > > > > > > > Hi,  
> > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > as instructed I upgraded to “Version  
> > > 4.11.6-Debian”.  
> > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > Attached the new debug file.  
> > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > Regards, Alexander  
> > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > On 7. February 2020 at 10:01:02, Andrew  
> > > Bartlett via samba (  
> > > > > > > > > > > > > > > samba at lists.samba.org) wrote:  
> > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > I would fix that first, please run Samba  
> > > 4.11.  
> > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > We have done much on replication  
> since then  
> > > and I'm keen to rule  
> > > > > > > > > > > > > > > out  
> > > > > > > > > > > > > > > things we have already fixed  
> before digging  
> > > into this further.  
> > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > Thanks!  
> > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > Andrew Bartlett  
> > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > On Fri, 2020-02-07 at 09:55 +0100,  
> > > Alexander Harm via samba  
> > > > > > > > > > > > > > > wrote:  
> > > > > > > > > > > > > > > > Version 4.9.5-Debian  
> > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > On 7. February 2020 at  
> 09:55:02, Andrew  
> > > Bartlett via samba (  
> > > > > > > > > > > > > > > > samba at lists.samba.org) wrote:  
> > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > Much better. What Samba version  
> is this?  
> > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > Andrew Bartlett  
> > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > On Fri, 2020-02-07 at 09:44 +0100,  
> > > Alexander Harm via samba  
> > > > > > > > > > > > > > > > wrote:  
> > > > > > > > > > > > > > > > > Is this better?  
> > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > On 7. February 2020 at  
> 09:42:01, Andrew  
> > > Bartlett via samba (  
> > > > > > > > > > > > > > > > > samba at lists.samba.org) wrote:  
> > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > I mean the final columns, not lines.  
> > > There are long lines that  
> > > > > > > > > > > > > > > > > seem to  
> > > > > > > > > > > > > > > > > be cut off mid-word, rather than  
> > > wrapped.  
> > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > Andrew Bartlett  
> > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > On Fri, 2020-02-07 at 09:14 +0100,  
> > > Alexander Harm via samba  
> > > > > > > > > > > > > > > > > wrote:  
> > > > > > > > > > > > > > > > > > I did but these are the  
> last lines.  
> > > It ends with “raise e”  
> > > > > > > > > > > > > > > > > > also in the shell.  
> > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > I also ran it on the other DCs and  
> > > they all end with “raise  
> > > > > > > > > > > > > > > > > > e”.  
> > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > Alexander  
> > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > On 7. February 2020 at 09:12:02,  
> > > Andrew Bartlett (  
> > > > > > > > > > > > > > > > > > abartlet at samba.org) wrote:  
> > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > G'Day Alexander,  
> > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > It looks like you have copied the  
> > > logs out of a terminal and  
> > > > > > > > > > > > > > > > > > lost the  
> > > > > > > > > > > > > > > > > > ends of the lines. Those have the  
> > > critical (groan...) details  
> > > > > > > > > > > > > > > > > > of what  
> > > > > > > > > > > > > > > > > > went wrong with the apparent  
> > > 'critical extension' failure.  
> > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > Can you try and get those and I'll  
> > > look at them tomorrow.  
> > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > Thanks!  
> > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > Andrew Bartlett  
> > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > On Fri, 2020-02-07 at 08:56 +0100,  
> > > Alexander Harm via samba  
> > > > > > > > > > > > > > > > > > wrote:  
> > > > > > > > > > > > > > > > > > > Hi Andrew,  
> > > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > > thanks for your reply. Find  
> > > attached the output of the  
> > > > > > > > > > > > > > > > > > > command. Looks like it fails on  
> > > renaming an object to me.  
> > > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > > Regards, Alexander  
> > > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > > On 7. February 2020 at 08:50:02,  
> > > Andrew Bartlett via samba  
> > > > > > > > > > > > > > > > > > > (samba at lists.samba.org) wrote:  
> > > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > > On Wed, 2020-02-05 at  
> 23:41 +0100,  
> > > Alexander Harm via samba  
> > > > > > > > > > > > > > > > > > > wrote:  
> > > > > > > > > > > > > > > > > > > > Hello,  
> > > > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > > > we could need some help  
> resolving  
> > > a replication issue we  
> > > > > > > > > > > > > > > > > > > > experience since one week.  
> > > > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > > > Running samba-tool drs  
> replicate  
> > > ka-h9-dc02 VMDC-AZURE-01  
> > > > > > > > > > > > > > > > > > > > dc=ds,dc=example,dc=com  
> --sync-  
> > > all -d 9 returns  
> > > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > > Do that again with  
> --local and we  
> > > should get a better set  
> > > > > > > > > > > > > > > > > > > of info in  
> > > > > > > > > > > > > > > > > > > the logs.  
> > > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > > Andrew Bartlett  
> > > > > > > > > > > > > > > > > > > --  
> > > > > > > > > > > > > > > > > > > Andrew Bartlett  
> > > http://samba.org/~abartlet/  
> > > > > > > > > > > > > > > > > > > Authentication Developer, Samba  
> > > Team http://samba.org  
> > > > > > > > > > > > > > > > > > > Samba Developer, Catalyst IT  
> > > > > > > > > > > > > > > > > > >  
> > > http://catalyst.net.nz/services/samba  
> > > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > > --  
> > > > > > > > > > > > > > > > > > Andrew Bartlett  
> > > http://samba.org/~abartlet/  
> > > > > > > > > > > > > > > > > > Authentication Developer,  
> Samba Team  
> > > http://samba.org  
> > > > > > > > > > > > > > > > > > Samba Developer, Catalyst IT  
> > > > > > > > > > > > > > > > > >  
> http://catalyst.net.nz/services/samba  
> > >  
> > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > --  
> > > > > > > > > > > > > > > > > Andrew Bartlett  
> > > http://samba.org/~abartlet/  
> > > > > > > > > > > > > > > > > Authentication Developer, Samba Team  
> > > http://samba.org  
> > > > > > > > > > > > > > > > > Samba Developer, Catalyst IT  
> > > > > > > > > > > > > > > > >  
> http://catalyst.net.nz/services/samba  
> > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > > --  
> > > > > > > > > > > > > > > > > To unsubscribe from this list  
> go to the  
> > > following URL and read  
> > > > > > > > > > > > > > > > > the  
> > > > > > > > > > > > > > > > > instructions:  
> > > https://lists.samba.org/mailman/options/samba  
> > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > --  
> > > > > > > > > > > > > > > > Andrew Bartlett  
> > > http://samba.org/~abartlet/  
> > > > > > > > > > > > > > > > Authentication Developer, Samba Team  
> > > http://samba.org  
> > > > > > > > > > > > > > > > Samba Developer, Catalyst IT  
> > > > > > > > > > > > > > > > http://catalyst.net.nz/services/samba  
> > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > > --  
> > > > > > > > > > > > > > > > To unsubscribe from this list  
> go to the  
> > > following URL and read  
> > > > > > > > > > > > > > > > the  
> > > > > > > > > > > > > > > > instructions:  
> > > https://lists.samba.org/mailman/options/samba  
> > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > --  
> > > > > > > > > > > > > > > Andrew Bartlett  
> http://samba.org/~abartlet/  
> > >  
> > > > > > > > > > > > > > > Authentication Developer, Samba Team  
> > > http://samba.org  
> > > > > > > > > > > > > > > Samba Developer, Catalyst IT  
> > > http://catalyst.net.nz/services/samba  
> > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > >  
> > > > > > > > > > > > > > > --  
> > > > > > > > > > > > > > > To unsubscribe from this list go to the  
> > > following URL and read  
> > > > > > > > > > > > > > > the  
> > > > > > > > > > > > > > > instructions:  
> > > https://lists.samba.org/mailman/options/samba  
> > > > > > > > > > > > > --  
> > > > > > > > > > > > > Andrew Bartlett  
> > > > > > > > > > > > > https://samba.org/~abartlet/  
> > > > > > > > > > > > > Authentication Developer, Samba Team  
> > > https://samba.org  
> > > > > > > > > > > > > Samba Development and Support, Catalyst IT -  
> > > Expert Open Source  
> > > > > > > > > > > > > Solutions  
> > > > > > > > > > > > > https://catalyst.net.nz/services/samba  
> > > > > > > > > > > > >  
> > > > > > > > > > > > >  
> > > > > > > > > > > > >  
> > > > > > > > > > > > >  
> > > > > > > > > > > > >  
> > > > > > > > > > > > >  
> > > > > > > > > > > > >  
> > > > > > > > > > > > > --  
> > > > > > > > > > > > > To unsubscribe from this list go to the  
> > > following URL and read the  
> > > > > > > > > > > > > instructions:  
> > > https://lists.samba.org/mailman/options/samba  
> > > > > > > > > > > > --  
> > > > > > > > > > > > Andrew Bartlett http://samba.org/~abartlet/  
> > > > > > > > > > > > Authentication Developer, Samba Team  
> > > http://samba.org  
> > > > > > > > > > > > Samba Developer, Catalyst IT  
> > > http://catalyst.net.nz/services/samba  
> > > > > > > > > > > >  
> > > > > > > > > > > > --  
> > > > > > > > > > > > To unsubscribe from this list go to the  
> following  
> > > URL and read the  
> > > > > > > > > > > > instructions:  
> > > https://lists.samba.org/mailman/options/samba  
> > > > > > > > > > --  
> > > > > > > > > > Andrew Bartlett http://samba.org/~abartlet/  
> > > > > > > > > > Authentication Developer, Samba Team  
> http://samba.org  
> > >  
> > > > > > > > > > Samba Developer, Catalyst IT  
> > > http://catalyst.net.nz/services/samba  
> > > > > > > > > >  
> > > > > > > > > >  
> > > > > > > > --  
> > > > > > > > Andrew Bartlett http://samba.org/~abartlet/  
> > > > > > > > Authentication Developer, Samba Team http://samba.org  
> > > > > > > > Samba Developer, Catalyst IT  
> > > http://catalyst.net.nz/services/samba  
> > > > > > > >  
> > > > > > --  
> > > > > > Andrew Bartlett http://samba.org/~abartlet/  
> > > > > > Authentication Developer, Samba Team http://samba.org  
> > > > > > Samba Developer, Catalyst IT  
> > > http://catalyst.net.nz/services/samba  
> > > > > >  
> > > > > >  
> > > --  
> > > Andrew Bartlett http://samba.org/~abartlet/  
> > > Authentication Developer, Samba Team http://samba.org  
> > > Samba Developer, Catalyst IT  
> http://catalyst.net.nz/services/samba  
> > >  
> > >  
> --  
> Andrew Bartlett  
> https://samba.org/~abartlet/  
> Authentication Developer, Samba Team https://samba.org  
> Samba Development and Support, Catalyst IT - Expert Open Source  
> Solutions  
> https://catalyst.net.nz/services/samba  
>  
>  
>  
>  
>  
>  
> --  
> To unsubscribe from this list go to the following URL and read the  
> instructions: https://lists.samba.org/mailman/options/samba  
>  
>  


--  
To unsubscribe from this list go to the following URL and read the  
instructions: https://lists.samba.org/mailman/options/samba  


More information about the samba mailing list