[Samba] Problem with network browsing
L.P.H. van Belle
belle at bazuin.nl
Mon Jul 13 07:31:34 UTC 2020
If you have 1 member server, you could enabe nmbd in that server.
Or install : llmnrd on linux and/or avahi-deamon if you dont have a member.
And make sure you can use "proxy dns" as in,
The primary DNS domain on linux should match (see in windows) CMD: ipconfig /all
The :
- primay dns suffix
- DNS Suffix search order
Then you are able to use \\hostname or \\hostname.FQ.DN.TLD
Greetz,
Louis
> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens
> Michael Jones via samba
> Verzonden: maandag 13 juli 2020 5:29
> Aan: sambalist
> Onderwerp: [Samba] Problem with network browsing
>
> I'm trying to diagnose why my windows 10 clients can't do
> network browsing.
> The network neighborhood doesn't show any of my machines
> running samba.
>
> I've verified that all of my samba hosts are running nmbd!
>
> I've reached the end of my ability to debug this, so I could
> really use
> some help from the list to figure out why this isn't working.
>
> I've isolated the situation down to the simplest setup I could manage.
> Normally I have about 5 different machines running file
> shares, but I've
> turned all but one of them off for this investigation.
>
> The test case is: 3 Gentoo systems, 1 windows 10 system.
>
> Gentoo:
> dc1 is my domain controller (uses the "samba" binary, instead
> of smbd /
> nmbd / winbindd, directly)
> mimir is joined to the domain of dc1. Has no file shares.
> Runs only "nmbd"
> and "winbindd". Should act as the master browser for netbios.
> userfiles is joined to the domain of dc1, has file shares.
> Runs smbd, nmdb,
> winbindd
>
> The windows 10 system is just a windows 10 system, joined to
> the domain of
> dc1.
>
> I've used "ntbstat -a mimir" from the windows 10 machine to confirm it
> thinks that mimir is the network browser.
>
> I can log into the network shares without issue, but the
> Network browser
> from Windows Explorer does not show any of my samba hosts.
> However, it does
> show other things, like Google Chromecasts, Printers, and
> other network
> infrastructure.
>
> Any advice?
>
> ###############################################
> Samba version
> ###############################################
> 4.11.8
>
> ###############################################
> DC1's config follows
> ###############################################
> [global]
> server role = active directory domain controller
> dns forwarder = 10.0.0.1
> idmap_ldb:use rfc2307 = yes
>
> workgroup = NETWORK-1
> realm = NETWORK-1.NET
> hosts allow = 192.168.0.0/16 172.16.0.0/12 10.0.0.0/8
> 127.0.0.1 fe80::/10 fd00::/8 ::1 LOCAL
>
> server min protocol = SMB3
> client min protocol = SMB3
>
> #Security settings
> invalid users = nobody root
> follow symlinks = false
>
> # The autorid map type auto-selects which UID to map to which
> microsoft UID.
> # Not entirely certain if UIDs will map properly across linux
> machines.
> Probably worth looking into.
> # Don't shrink the UID range, apparently some users end up with UIDs
> towards the max size. Unclear why.
> idmap config * : backend = autorid
> idmap config * : range = 1000000-19999999
>
> username map = /etc/samba/user.map
> create mask = 0666
> directory mask = 0777
>
> allow trusted domains = no
> template shell = /bin/bash
> template homedir = /home/%U
>
> winbind use default domain = yes
> winbind enum users = yes
> winbind enum groups = yes
> winbind nested groups = yes
>
> ###############################################
> Mimir's config follows
> ###############################################
> [global]
> security = ADS
> workgroup = NETWORK-1
> realm = NETWORK-1.NET
>
> #Security settings
> invalid users = nobody root
> # Waiting on Root Explorer to fix bug
> server min protocol = SMB2
> client min protocol = SMB2
>
> # The autorid map type auto-selects which UID to map to which
> microsoft UID.
> # Not entirely certain if UIDs will map properly across linux
> machines.
> Probably worth looking into.
> # Don't shrink the UID range, apparently some users end up with UIDs
> towards the max size. Unclear why.
> idmap config * : backend = autorid
> idmap config * : range = 1000000-19999999
>
> username map = /etc/samba/user.map
>
> allow trusted domains = no
> template shell = /bin/bash
> template homedir = /home/%U
>
> obey pam restrictions = no
> kerberos method = secrets and keytab
>
> winbind use default domain = yes
> winbind enum users = yes
> winbind enum groups = yes
> winbind nested groups = yes
> winbind refresh tickets = yes
> winbind offline logon = yes
> ##
> # Set the amount of time to cache usernames / passwords to 30 days.
> # That should be long enough to reliably re-establish an
> internet connection
> # between logins.
> ##
> winbind cache time = 2592000
>
> #Auto detection settings
> domain master = yes
> local master = yes
> preferred master = yes
> os level = 255
>
>
> ###############################################
> Userfiles's config follows
> ###############################################
> [global]
> security = ADS
> workgroup = NETWORK-1
> realm = NETWORK-1.NET
>
> #Security settings
> invalid users = nobody root
> # Waiting on Root Explorer to fix bug
> server min protocol = SMB2
> client min protocol = SMB2
>
> # The autorid map type auto-selects which UID to map to which
> microsoft UID.
> # Not entirely certain if UIDs will map properly across linux
> machines.
> Probably worth looking into.
> # Don't shrink the UID range, apparently some users end up with UIDs
> towards the max size. Unclear why.
> idmap config * : backend = autorid
> idmap config * : range = 1000000-19999999
>
> username map = /etc/samba/user.map
>
> allow trusted domains = no
> template shell = /bin/bash
> template homedir = /home/%U
>
> obey pam restrictions = no
> kerberos method = secrets and keytab
>
> winbind use default domain = yes
> winbind enum users = yes
> winbind enum groups = yes
> winbind nested groups = yes
> winbind refresh tickets = yes
> winbind offline logon = yes
> ##
> # Set the amount of time to cache usernames / passwords to 30 days.
> # That should be long enough to reliably re-establish an
> internet connection
> # between logins.
> ##
> winbind cache time = 2592000
>
> [Mikes_Files]
> comment = Mike's Files
> path = /media/raid/userfiles/jonesmz/
> valid users = jonesmz
> force user = jonesmz
>
> ###############################################
> Log from running the "smbtree" command
> ###############################################
> mimir /var/log/samba # smbtree --user jonesmz -d10
> INFO: Current debug levels:
> all: 10
> tdb: 10
> printdrivers: 10
> lanman: 10
> smb: 10
> rpc_parse: 10
> rpc_srv: 10
> rpc_cli: 10
> passdb: 10
> sam: 10
> auth: 10
> winbind: 10
> vfs: 10
> idmap: 10
> quota: 10
> acls: 10
> locking: 10
> msdfs: 10
> dmapi: 10
> registry: 10
> scavenger: 10
> dns: 10
> ldb: 10
> tevent: 10
> auth_audit: 10
> auth_json_audit: 10
> kerberos: 10
> drs_repl: 10
> smb2: 10
> smb2_credits: 10
> dsdb_audit: 10
> dsdb_json_audit: 10
> dsdb_password_audit: 10
> dsdb_password_json_audit: 10
> dsdb_transaction_audit: 10
> dsdb_transaction_json_audit: 10
> dsdb_group_audit: 10
> dsdb_group_json_audit: 10
> lp_load_ex: refreshing parameters
> Initialising global parameters
> rlimit_max: increasing rlimit_max (1024) to minimum Windows
> limit (16384)
> INFO: Current debug levels:
> all: 10
> tdb: 10
> printdrivers: 10
> lanman: 10
> smb: 10
> rpc_parse: 10
> rpc_srv: 10
> rpc_cli: 10
> passdb: 10
> sam: 10
> auth: 10
> winbind: 10
> vfs: 10
> idmap: 10
> quota: 10
> acls: 10
> locking: 10
> msdfs: 10
> dmapi: 10
> registry: 10
> scavenger: 10
> dns: 10
> ldb: 10
> tevent: 10
> auth_audit: 10
> auth_json_audit: 10
> kerberos: 10
> drs_repl: 10
> smb2: 10
> smb2_credits: 10
> dsdb_audit: 10
> dsdb_json_audit: 10
> dsdb_password_audit: 10
> dsdb_password_json_audit: 10
> dsdb_transaction_audit: 10
> dsdb_transaction_json_audit: 10
> dsdb_group_audit: 10
> dsdb_group_json_audit: 10
> Processing section "[global]"
> doing parameter security = ADS
> doing parameter workgroup = NETWORK-1
> doing parameter realm = NETWORK-1.NET
> doing parameter log file = /var/log/samba/log.%L.%m
> doing parameter log level = 2
> doing parameter max log size = 100
> doing parameter invalid users = nobody root
> doing parameter server min protocol = SMB2
> doing parameter client min protocol = SMB2
> doing parameter client NTLMv2 auth = Yes
> doing parameter client lanman auth = No
> doing parameter client plaintext auth = No
> doing parameter follow symlinks = false
> doing parameter idmap config * : backend = autorid
> doing parameter idmap config * : range = 1000000-19999999
> doing parameter username map = /etc/samba/user.map
> doing parameter allow trusted domains = no
> doing parameter template shell = /bin/bash
> doing parameter template homedir = /home/%U
> doing parameter obey pam restrictions = no
> doing parameter kerberos method = secrets and keytab
> doing parameter winbind use default domain = yes
> doing parameter winbind enum users = yes
> doing parameter winbind enum groups = yes
> doing parameter winbind nested groups = yes
> doing parameter winbind refresh tickets = yes
> doing parameter winbind offline logon = yes
> doing parameter winbind cache time = 2592000
> doing parameter rpc_daemon:fssd = fork
> doing parameter registry shares = yes
> doing parameter include = registry
> doing parameter registry shares = yes
> registry_init_smbconf called
> regdb_init: registry db openend. refcount reset (1)
> reghook_cache_init: new tree with default ops 0x7f3d43d83140
> for key []
> regdb_fetch_values: Looking for values of key
> [HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Ports]
> regdb_unpack_values: value[0]: name[Samba Printer Port] len[2]
> regdb_fetch_values: Looking for values of key
> [HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Printers]
> regdb_unpack_values: value[0]: name[DefaultSpoolDirectory] len[70]
> regdb_fetch_values: Looking for values of key
> [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog]
> regdb_unpack_values: value[0]: name[DisplayName] len[20]
> regdb_unpack_values: value[1]: name[ErrorControl] len[4]
> regdb_fetch_values: Looking for values of key
> [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog]
> regdb_unpack_values: value[0]: name[DisplayName] len[20]
> regdb_unpack_values: value[1]: name[ErrorControl] len[4]
> reghook_cache_add: Adding ops 0x7f3d43d831a0 for key
> [\HKLM\SOFTWARE\Samba\smbconf]
> pathtree_add: Enter
> pathtree_add: Successfully added node
> [HKLM\SOFTWARE\Samba\smbconf] to tree
> pathtree_add: Exit
> regdb_close: decrementing refcount (1->0)
> regdb_open: registry db opened. refcount reset (1)
> regkey_open_onelevel: name = [HKLM]
> regdb_open: incrementing refcount (1->2)
> reghook_cache_find: Searching for keyname [\HKLM]
> pathtree_find: Enter [\HKLM]
> pathtree_find: Exit
> reghook_cache_find: found ops 0x7f3d43d83140 for key [\HKLM]
> regkey_open_onelevel: name = [SOFTWARE]
> regdb_open: incrementing refcount (2->3)
> reghook_cache_find: Searching for keyname [\HKLM\SOFTWARE]
> pathtree_find: Enter [\HKLM\SOFTWARE]
> pathtree_find: Exit
> reghook_cache_find: found ops 0x7f3d43d83140 for key [\HKLM\SOFTWARE]
> regkey_open_onelevel: name = [Samba]
> regdb_open: incrementing refcount (3->4)
> reghook_cache_find: Searching for keyname [\HKLM\SOFTWARE\Samba]
> pathtree_find: Enter [\HKLM\SOFTWARE\Samba]
> pathtree_find: Exit
> reghook_cache_find: found ops 0x7f3d43d83140 for key
> [\HKLM\SOFTWARE\Samba]
> regkey_open_onelevel: name = [smbconf]
> regdb_open: incrementing refcount (4->5)
> reghook_cache_find: Searching for keyname
> [\HKLM\SOFTWARE\Samba\smbconf]
> pathtree_find: Enter [\HKLM\SOFTWARE\Samba\smbconf]
> pathtree_find: Exit
> reghook_cache_find: found ops 0x7f3d43d831a0 for key
> [\HKLM\SOFTWARE\Samba\smbconf]
> regdb_close: decrementing refcount (5->4)
> regdb_close: decrementing refcount (4->3)
> regdb_close: decrementing refcount (3->2)
> process_registry_service: service name global
> regkey_open_onelevel: name = [global]
> regdb_open: incrementing refcount (2->3)
> reghook_cache_find: Searching for keyname
> [\HKLM\SOFTWARE\Samba\smbconf\global]
> pathtree_find: Enter [\HKLM\SOFTWARE\Samba\smbconf\global]
> pathtree_find: Exit
> reghook_cache_find: found ops 0x7f3d43d831a0 for key
> [\HKLM\SOFTWARE\Samba\smbconf\global]
> key [HKLM\SOFTWARE\Samba\smbconf\global] not found
> regdb_close: decrementing refcount (3->2)
> doing parameter load printers = no
> doing parameter printing = bsd
> doing parameter printcap name = /dev/null
> doing parameter disable spoolss = yes
> doing parameter include = /etc/samba/smb_perf.conf
> Processing section "[global]"
> doing parameter strict locking = no
> doing parameter strict allocate = yes
> doing parameter min receivefile size = 16384
> doing parameter use sendfile = true
> doing parameter include = /etc/samba/smb-%L.conf
> Processing section "[global]"
> doing parameter domain master = yes
> doing parameter local master = yes
> doing parameter preferred master = yes
> doing parameter os level = 255
> pm_process() returned Yes
> lp_servicenumber: couldn't find homes
> added interface ceph-public ip=fda8:941:2491:1699:60fa:e622:8345:2162
> bcast= netmask=ffff:ffff:ffff:ffff::
> added interface general ip=10.0.0.2 bcast=10.255.255.255
> netmask=255.0.0.0
> internal_resolve_name: looking up NETWORK-1#1d (sitename (null))
> Opening cache file at /var/lock/samba/gencache.tdb
> name NETWORK-1#1D found.
> remove_duplicate_addrs2: looking for duplicate address/port pairs
> Enter NETWORK-1\jonesmz's password:
> Connecting to 10.0.0.2 at port 445
> Connecting to 10.0.0.2 at port 139
> name_status_find: looking up *#00 at 10.0.0.2
> namecache_status_fetch: key NBT/*#00.00.10.0.0.2 -> MIMIR
> Connecting to 10.0.0.2 at port 445
> Connecting to 10.0.0.2 at port 139
>
>
>
> ###############################################
> Log from running the "smbtree" command, with the broadcast flag
> ###############################################
> mimir /var/log/samba # smbtree --user jonesmz -b -d10
> INFO: Current debug levels:
> all: 10
> tdb: 10
> printdrivers: 10
> lanman: 10
> smb: 10
> rpc_parse: 10
> rpc_srv: 10
> rpc_cli: 10
> passdb: 10
> sam: 10
> auth: 10
> winbind: 10
> vfs: 10
> idmap: 10
> quota: 10
> acls: 10
> locking: 10
> msdfs: 10
> dmapi: 10
> registry: 10
> scavenger: 10
> dns: 10
> ldb: 10
> tevent: 10
> auth_audit: 10
> auth_json_audit: 10
> kerberos: 10
> drs_repl: 10
> smb2: 10
> smb2_credits: 10
> dsdb_audit: 10
> dsdb_json_audit: 10
> dsdb_password_audit: 10
> dsdb_password_json_audit: 10
> dsdb_transaction_audit: 10
> dsdb_transaction_json_audit: 10
> dsdb_group_audit: 10
> dsdb_group_json_audit: 10
> lp_load_ex: refreshing parameters
> Initialising global parameters
> rlimit_max: increasing rlimit_max (1024) to minimum Windows
> limit (16384)
> INFO: Current debug levels:
> all: 10
> tdb: 10
> printdrivers: 10
> lanman: 10
> smb: 10
> rpc_parse: 10
> rpc_srv: 10
> rpc_cli: 10
> passdb: 10
> sam: 10
> auth: 10
> winbind: 10
> vfs: 10
> idmap: 10
> quota: 10
> acls: 10
> locking: 10
> msdfs: 10
> dmapi: 10
> registry: 10
> scavenger: 10
> dns: 10
> ldb: 10
> tevent: 10
> auth_audit: 10
> auth_json_audit: 10
> kerberos: 10
> drs_repl: 10
> smb2: 10
> smb2_credits: 10
> dsdb_audit: 10
> dsdb_json_audit: 10
> dsdb_password_audit: 10
> dsdb_password_json_audit: 10
> dsdb_transaction_audit: 10
> dsdb_transaction_json_audit: 10
> dsdb_group_audit: 10
> dsdb_group_json_audit: 10
> Processing section "[global]"
> doing parameter security = ADS
> doing parameter workgroup = NETWORK-1
> doing parameter realm = NETWORK-1.NET
> doing parameter log file = /var/log/samba/log.%L.%m
> doing parameter log level = 2
> doing parameter max log size = 100
> doing parameter invalid users = nobody root
> doing parameter server min protocol = SMB2
> doing parameter client min protocol = SMB2
> doing parameter client NTLMv2 auth = Yes
> doing parameter client lanman auth = No
> doing parameter client plaintext auth = No
> doing parameter follow symlinks = false
> doing parameter idmap config * : backend = autorid
> doing parameter idmap config * : range = 1000000-19999999
> doing parameter username map = /etc/samba/user.map
> doing parameter allow trusted domains = no
> doing parameter template shell = /bin/bash
> doing parameter template homedir = /home/%U
> doing parameter obey pam restrictions = no
> doing parameter kerberos method = secrets and keytab
> doing parameter winbind use default domain = yes
> doing parameter winbind enum users = yes
> doing parameter winbind enum groups = yes
> doing parameter winbind nested groups = yes
> doing parameter winbind refresh tickets = yes
> doing parameter winbind offline logon = yes
> doing parameter winbind cache time = 2592000
> doing parameter rpc_daemon:fssd = fork
> doing parameter registry shares = yes
> doing parameter include = registry
> doing parameter registry shares = yes
> registry_init_smbconf called
> regdb_init: registry db openend. refcount reset (1)
> reghook_cache_init: new tree with default ops 0x7f09a7972140
> for key []
> regdb_fetch_values: Looking for values of key
> [HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Ports]
> regdb_unpack_values: value[0]: name[Samba Printer Port] len[2]
> regdb_fetch_values: Looking for values of key
> [HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Printers]
> regdb_unpack_values: value[0]: name[DefaultSpoolDirectory] len[70]
> regdb_fetch_values: Looking for values of key
> [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog]
> regdb_unpack_values: value[0]: name[DisplayName] len[20]
> regdb_unpack_values: value[1]: name[ErrorControl] len[4]
> regdb_fetch_values: Looking for values of key
> [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog]
> regdb_unpack_values: value[0]: name[DisplayName] len[20]
> regdb_unpack_values: value[1]: name[ErrorControl] len[4]
> reghook_cache_add: Adding ops 0x7f09a79721a0 for key
> [\HKLM\SOFTWARE\Samba\smbconf]
> pathtree_add: Enter
> pathtree_add: Successfully added node
> [HKLM\SOFTWARE\Samba\smbconf] to tree
> pathtree_add: Exit
> regdb_close: decrementing refcount (1->0)
> regdb_open: registry db opened. refcount reset (1)
> regkey_open_onelevel: name = [HKLM]
> regdb_open: incrementing refcount (1->2)
> reghook_cache_find: Searching for keyname [\HKLM]
> pathtree_find: Enter [\HKLM]
> pathtree_find: Exit
> reghook_cache_find: found ops 0x7f09a7972140 for key [\HKLM]
> regkey_open_onelevel: name = [SOFTWARE]
> regdb_open: incrementing refcount (2->3)
> reghook_cache_find: Searching for keyname [\HKLM\SOFTWARE]
> pathtree_find: Enter [\HKLM\SOFTWARE]
> pathtree_find: Exit
> reghook_cache_find: found ops 0x7f09a7972140 for key [\HKLM\SOFTWARE]
> regkey_open_onelevel: name = [Samba]
> regdb_open: incrementing refcount (3->4)
> reghook_cache_find: Searching for keyname [\HKLM\SOFTWARE\Samba]
> pathtree_find: Enter [\HKLM\SOFTWARE\Samba]
> pathtree_find: Exit
> reghook_cache_find: found ops 0x7f09a7972140 for key
> [\HKLM\SOFTWARE\Samba]
> regkey_open_onelevel: name = [smbconf]
> regdb_open: incrementing refcount (4->5)
> reghook_cache_find: Searching for keyname
> [\HKLM\SOFTWARE\Samba\smbconf]
> pathtree_find: Enter [\HKLM\SOFTWARE\Samba\smbconf]
> pathtree_find: Exit
> reghook_cache_find: found ops 0x7f09a79721a0 for key
> [\HKLM\SOFTWARE\Samba\smbconf]
> regdb_close: decrementing refcount (5->4)
> regdb_close: decrementing refcount (4->3)
> regdb_close: decrementing refcount (3->2)
> process_registry_service: service name global
> regkey_open_onelevel: name = [global]
> regdb_open: incrementing refcount (2->3)
> reghook_cache_find: Searching for keyname
> [\HKLM\SOFTWARE\Samba\smbconf\global]
> pathtree_find: Enter [\HKLM\SOFTWARE\Samba\smbconf\global]
> pathtree_find: Exit
> reghook_cache_find: found ops 0x7f09a79721a0 for key
> [\HKLM\SOFTWARE\Samba\smbconf\global]
> key [HKLM\SOFTWARE\Samba\smbconf\global] not found
> regdb_close: decrementing refcount (3->2)
> doing parameter load printers = no
> doing parameter printing = bsd
> doing parameter printcap name = /dev/null
> doing parameter disable spoolss = yes
> doing parameter include = /etc/samba/smb_perf.conf
> Processing section "[global]"
> doing parameter strict locking = no
> doing parameter strict allocate = yes
> doing parameter min receivefile size = 16384
> doing parameter use sendfile = true
> doing parameter include = /etc/samba/smb-%L.conf
> Processing section "[global]"
> doing parameter domain master = yes
> doing parameter local master = yes
> doing parameter preferred master = yes
> doing parameter os level = 255
> pm_process() returned Yes
> lp_servicenumber: couldn't find homes
> added interface ceph-public ip=fda8:941:2491:1699:60fa:e622:8345:2162
> bcast= netmask=ffff:ffff:ffff:ffff::
> added interface general ip=10.0.0.2 bcast=10.255.255.255
> netmask=255.0.0.0
> name_resolve_bcast: Attempting broadcast lookup for name
> __MSBROWSE__<0x1>
> parse_nmb: packet id = 22832
> nmb packet from 10.0.0.2(35072) header: id=22832 opcode=Query(0)
> response=Yes
> header: flags: bcast=No rec_avail=Yes rec_des=Yes
> trunc=No auth=Yes
> header: rcode=0 qdcount=0 ancount=1 nscount=0 arcount=0
> answers: nmb_name=__MSBROWSE__<01> rr_type=32 rr_class=1
> ttl=259200
> answers 0 char ...... hex 80000A000002
> Got a positive name query response from 10.0.0.2 ( 10.0.0.2 )
> validator failed
> parse_nmb: packet id = 22832
> nmb packet from 10.0.0.2(35072) header: id=22832 opcode=Query(0)
> response=Yes
> header: flags: bcast=No rec_avail=Yes rec_des=Yes
> trunc=No auth=Yes
> header: rcode=0 qdcount=0 ancount=1 nscount=0 arcount=0
> answers: nmb_name=__MSBROWSE__<01> rr_type=32 rr_class=1
> ttl=259200
> answers 0 char ...... hex 80000A000002
> Got a positive name query response from 10.0.0.2 ( )
> validator failed
> name_status_find: looking up *#00 at 10.0.0.2
> Opening cache file at /var/lock/samba/gencache.tdb
> gencache_set_data_blob: Adding cache entry with
> key=[NBT/*#00.1D.10.0.0.2]
> and timeout=[Wed Dec 31 06:00:00 PM 1969 CST] (-1594610080
> seconds in the
> past)
> namecache_status_fetch: no entry for NBT/*#00.1D.10.0.0.2 found.
> startlmhosts: Can't open lmhosts file /etc/samba/lmhosts.
> Error was No such
> file or directory
> parse_nmb: packet id = 15345
> nmb packet from 10.0.0.2(35072) header: id=15345 opcode=Query(0)
> response=Yes
> header: flags: bcast=No rec_avail=No rec_des=No trunc=No auth=Yes
> header: rcode=0 qdcount=0 ancount=1 nscount=0 arcount=0
> answers: nmb_name=*<00> rr_type=33 rr_class=1 ttl=0
> answers 0 char .MIMIR hex
> 074D494D495220202020202020202020
> answers 10 char ...MIMIR hex
> 0004004D494D49522020202020202020
> answers 20 char ...MIMIR hex
> 20200304004D494D4952202020202020
> answers 30 char ....__MSBRO hex
> 2020202020040001025F5F4D5342524F
> answers 40 char WSE__....NETWORK hex
> 5753455F5F020184004E4554574F524B
> answers 50 char -1 ...NETWO hex
> 2D312020202020200084004E4554574F
> answers 60 char RK-1 ...NET hex
> 524B2D312020202020201D04004E4554
> answers 70 char WORK-1 .... hex
> 574F524B2D312020202020201E840000
> answers 80 char ................ hex
> 00000000000000000000000000000000
> answers 90 char ................ hex
> 00000000000000000000000000000000
> answers a0 char ............. hex 00000000000000000000000000
> MIMIR#00: flags = 0x04
> MIMIR#03: flags = 0x04
> MIMIR#20: flags = 0x04
> __MSBROWSE__#01: flags = 0x84
> NETWORK-1#00: flags = 0x84
> NETWORK-1#1d: flags = 0x04
> NETWORK-1#1e: flags = 0x84
> gencache_set_data_blob: Adding cache entry with
> key=[NBT/*#00.1D.10.0.0.2]
> and timeout=[Sun Jul 12 10:25:40 PM 2020 CDT] (660 seconds ahead)
> namecache_status_store: entry NBT/*#00.1D.10.0.0.2 -> NETWORK-1
> name_status_find: name found, name NETWORK-1 ip address is 10.0.0.2
> internal_resolve_name: looking up NETWORK-1#1d (sitename (null))
> name NETWORK-1#1D found.
> remove_duplicate_addrs2: looking for duplicate address/port pairs
> found master browser NETWORK-1, 10.0.0.2
> Enter NETWORK-1\jonesmz's password:
> Connecting to 10.0.0.2 at port 445
> Connecting to 10.0.0.2 at port 139
> name_status_find: looking up *#00 at 10.0.0.2
> namecache_status_fetch: key NBT/*#00.00.10.0.0.2 -> MIMIR
> Connecting to 10.0.0.2 at port 445
> Connecting to 10.0.0.2 at port 139
> Unable to find master browser by broadcast
>
>
>
>
>
> ###############################################
> /var/log/samba/log.MIMIR.nmbd
> ###############################################
> mimir /var/log/samba # cat log.MIMIR.nmbd
> [2020/07/12 21:47:18.573443, 2]
> ../../source3/lib/interface.c:343(add_interface)
> added interface ceph-public
> ip=fda8:941:2491:1699:60fa:e622:8345:2162
> bcast= netmask=ffff:ffff:ffff:ffff::
> [2020/07/12 21:47:18.573706, 2]
> ../../source3/lib/interface.c:343(add_interface)
> added interface general ip=10.0.0.2 bcast=10.255.255.255
> netmask=255.0.0.0
> [2020/07/12 21:47:18.573905, 2]
> ../../source3/nmbd/nmbd_subnetdb.c:180(make_subnet)
> making subnet name:10.0.0.2 Broadcast address:10.255.255.255 Subnet
> mask:255.0.0.0
> [2020/07/12 21:47:18.573967, 2]
> ../../source3/nmbd/nmbd_subnetdb.c:299(create_subnets)
> create_subnets: ignoring non IPv4 interface.
> [2020/07/12 21:47:18.574019, 2]
> ../../source3/nmbd/nmbd_subnetdb.c:180(make_subnet)
> making subnet name:UNICAST_SUBNET Broadcast address:0.0.0.0 Subnet
> mask:0.0.0.0
> [2020/07/12 21:47:18.574073, 2]
> ../../source3/nmbd/nmbd_subnetdb.c:180(make_subnet)
> making subnet name:REMOTE_BROADCAST_SUBNET Broadcast address:0.0.0.0
> Subnet mask:0.0.0.0
> [2020/07/12 21:47:18.574184, 2]
> ../../source3/nmbd/nmbd_lmhosts.c:42(load_lmhosts_file)
> load_lmhosts_file: Can't open lmhosts file
> /etc/samba/lmhosts. Error was
> No such file or directory
> [2020/07/12 21:47:18.584259, 0]
> ../../lib/util/become_daemon.c:135(daemon_ready)
> daemon_ready: daemon 'nmbd' finished starting up and ready to serve
> connections
> [2020/07/12 21:47:18.585679, 0]
> ../../source3/nmbd/nmbd_become_dmb.c:294(become_domain_master_
> browser_bcast)
> become_domain_master_browser_bcast:
> Attempting to become domain master browser on workgroup NETWORK-1 on
> subnet 10.0.0.2
> [2020/07/12 21:47:18.585829, 0]
> ../../source3/nmbd/nmbd_become_dmb.c:306(become_domain_master_
> browser_bcast)
> become_domain_master_browser_bcast: querying subnet
> 10.0.0.2 for domain
> master browser on workgroup NETWORK-1
> [2020/07/12 21:47:18.587863, 0]
> ../../source3/nmbd/nmbd_namequery.c:109(query_name_response)
> query_name_response: Multiple (2) responses received for a query on
> subnet 10.0.0.2 for name NETWORK-1<1d>.
> This response was from IP 10.0.0.154, reporting an IP address of
> 10.0.0.154.
> [2020/07/12 21:47:18.588083, 0]
> ../../source3/nmbd/nmbd_become_dmb.c:237(become_domain_master_
> query_success)
> become_domain_master_query_success:
> There is already a domain master browser at IP 10.0.0.3 for
> workgroup
> NETWORK-1 registered on subnet 10.0.0.2.
> [2020/07/12 21:47:18.588205, 0]
> ../../source3/nmbd/nmbd_namequery.c:109(query_name_response)
> query_name_response: Multiple (2) responses received for a query on
> subnet 10.0.0.2 for name NETWORK-1<1b>.
> This response was from IP 10.0.0.3, reporting an IP address
> of 10.0.0.3.
> [2020/07/12 21:47:25.606229, 2]
> ../../source3/nmbd/nmbd_elections.c:40(send_election_dgram)
> send_election_dgram: Sending election packet for workgroup
> NETWORK-1 on
> subnet 10.0.0.2
> [2020/07/12 21:47:27.610464, 2]
> ../../source3/nmbd/nmbd_elections.c:40(send_election_dgram)
> send_election_dgram: Sending election packet for workgroup
> NETWORK-1 on
> subnet 10.0.0.2
> [2020/07/12 21:47:29.611991, 2]
> ../../source3/nmbd/nmbd_elections.c:40(send_election_dgram)
> send_election_dgram: Sending election packet for workgroup
> NETWORK-1 on
> subnet 10.0.0.2
> [2020/07/12 21:47:31.613930, 2]
> ../../source3/nmbd/nmbd_elections.c:40(send_election_dgram)
> send_election_dgram: Sending election packet for workgroup
> NETWORK-1 on
> subnet 10.0.0.2
> [2020/07/12 21:47:33.615937, 2]
> ../../source3/nmbd/nmbd_elections.c:40(send_election_dgram)
> send_election_dgram: Sending election packet for workgroup
> NETWORK-1 on
> subnet 10.0.0.2
> [2020/07/12 21:47:33.616324, 2]
> ../../source3/nmbd/nmbd_elections.c:200(run_elections)
> run_elections: >>> Won election for workgroup NETWORK-1 on subnet
> 10.0.0.2 <<<
> [2020/07/12 21:47:33.616393, 2]
> ../../source3/nmbd/nmbd_become_lmb.c:537(become_local_master_browser)
> become_local_master_browser: Starting to become a master browser for
> workgroup NETWORK-1 on subnet 10.0.0.2
> [2020/07/12 21:47:41.482842, 0]
> ../../source3/nmbd/nmbd_become_lmb.c:397(become_local_master_stage2)
> *****
>
> Samba name server MIMIR is now a local master browser for workgroup
> NETWORK-1 on subnet 10.0.0.2
>
> *****
> [2020/07/12 21:52:36.083840, 0]
> ../../source3/nmbd/nmbd_become_dmb.c:294(become_domain_master_
> browser_bcast)
> become_domain_master_browser_bcast:
> Attempting to become domain master browser on workgroup NETWORK-1 on
> subnet 10.0.0.2
> [2020/07/12 21:52:36.084022, 0]
> ../../source3/nmbd/nmbd_become_dmb.c:306(become_domain_master_
> browser_bcast)
> become_domain_master_browser_bcast: querying subnet
> 10.0.0.2 for domain
> master browser on workgroup NETWORK-1
> [2020/07/12 21:52:36.086618, 0]
> ../../source3/nmbd/nmbd_become_dmb.c:237(become_domain_master_
> query_success)
> become_domain_master_query_success:
> There is already a domain master browser at IP 10.0.0.3 for
> workgroup
> NETWORK-1 registered on subnet 10.0.0.2.
> [2020/07/12 21:52:36.087929, 0]
> ../../source3/nmbd/nmbd_namequery.c:109(query_name_response)
> query_name_response: Multiple (2) responses received for a query on
> subnet 10.0.0.2 for name NETWORK-1<1b>.
> This response was from IP 10.0.0.3, reporting an IP address
> of 10.0.0.3.
> [2020/07/12 21:57:33.775070, 0]
> ../../source3/nmbd/nmbd_become_dmb.c:294(become_domain_master_
> browser_bcast)
> become_domain_master_browser_bcast:
> Attempting to become domain master browser on workgroup NETWORK-1 on
> subnet 10.0.0.2
> [2020/07/12 21:57:33.775542, 0]
> ../../source3/nmbd/nmbd_become_dmb.c:306(become_domain_master_
> browser_bcast)
> become_domain_master_browser_bcast: querying subnet
> 10.0.0.2 for domain
> master browser on workgroup NETWORK-1
> [2020/07/12 21:57:33.781366, 0]
> ../../source3/nmbd/nmbd_become_dmb.c:237(become_domain_master_
> query_success)
> become_domain_master_query_success:
> There is already a domain master browser at IP 10.0.0.3 for
> workgroup
> NETWORK-1 registered on subnet 10.0.0.2.
> [2020/07/12 21:57:33.781759, 0]
> ../../source3/nmbd/nmbd_namequery.c:109(query_name_response)
> query_name_response: Multiple (2) responses received for a query on
> subnet 10.0.0.2 for name NETWORK-1<1b>.
> This response was from IP 10.0.0.3, reporting an IP address
> of 10.0.0.3.
> [2020/07/12 22:02:48.653973, 0]
> ../../source3/nmbd/nmbd_become_dmb.c:294(become_domain_master_
> browser_bcast)
> become_domain_master_browser_bcast:
> Attempting to become domain master browser on workgroup NETWORK-1 on
> subnet 10.0.0.2
> [2020/07/12 22:02:48.654167, 0]
> ../../source3/nmbd/nmbd_become_dmb.c:306(become_domain_master_
> browser_bcast)
> become_domain_master_browser_bcast: querying subnet
> 10.0.0.2 for domain
> master browser on workgroup NETWORK-1
> [2020/07/12 22:02:48.663763, 0]
> ../../source3/nmbd/nmbd_become_dmb.c:237(become_domain_master_
> query_success)
> become_domain_master_query_success:
> There is already a domain master browser at IP 10.0.0.3 for
> workgroup
> NETWORK-1 registered on subnet 10.0.0.2.
> [2020/07/12 22:02:48.664086, 0]
> ../../source3/nmbd/nmbd_namequery.c:109(query_name_response)
> query_name_response: Multiple (2) responses received for a query on
> subnet 10.0.0.2 for name NETWORK-1<1b>.
> This response was from IP 10.0.0.3, reporting an IP address
> of 10.0.0.3.
> [2020/07/12 22:07:49.623810, 0]
> ../../source3/nmbd/nmbd_become_dmb.c:294(become_domain_master_
> browser_bcast)
> become_domain_master_browser_bcast:
> Attempting to become domain master browser on workgroup NETWORK-1 on
> subnet 10.0.0.2
> [2020/07/12 22:07:49.624015, 0]
> ../../source3/nmbd/nmbd_become_dmb.c:306(become_domain_master_
> browser_bcast)
> become_domain_master_browser_bcast: querying subnet
> 10.0.0.2 for domain
> master browser on workgroup NETWORK-1
> [2020/07/12 22:07:49.629685, 0]
> ../../source3/nmbd/nmbd_become_dmb.c:237(become_domain_master_
> query_success)
> become_domain_master_query_success:
> There is already a domain master browser at IP 10.0.0.3 for
> workgroup
> NETWORK-1 registered on subnet 10.0.0.2.
> [2020/07/12 22:07:49.631020, 0]
> ../../source3/nmbd/nmbd_namequery.c:109(query_name_response)
> query_name_response: Multiple (2) responses received for a query on
> subnet 10.0.0.2 for name NETWORK-1<1b>.
> This response was from IP 10.0.0.3, reporting an IP address
> of 10.0.0.3.
> [2020/07/12 22:12:52.243758, 0]
> ../../source3/nmbd/nmbd_become_dmb.c:294(become_domain_master_
> browser_bcast)
> become_domain_master_browser_bcast:
> Attempting to become domain master browser on workgroup NETWORK-1 on
> subnet 10.0.0.2
> [2020/07/12 22:12:52.243962, 0]
> ../../source3/nmbd/nmbd_become_dmb.c:306(become_domain_master_
> browser_bcast)
> become_domain_master_browser_bcast: querying subnet
> 10.0.0.2 for domain
> master browser on workgroup NETWORK-1
> [2020/07/12 22:12:52.245073, 0]
> ../../source3/nmbd/nmbd_become_dmb.c:237(become_domain_master_
> query_success)
> become_domain_master_query_success:
> There is already a domain master browser at IP 10.0.0.3 for
> workgroup
> NETWORK-1 registered on subnet 10.0.0.2.
> [2020/07/12 22:12:52.245285, 0]
> ../../source3/nmbd/nmbd_namequery.c:109(query_name_response)
> query_name_response: Multiple (2) responses received for a query on
> subnet 10.0.0.2 for name NETWORK-1<1b>.
> This response was from IP 10.0.0.3, reporting an IP address
> of 10.0.0.3.
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: https://lists.samba.org/mailman/options/samba
>
>
More information about the samba
mailing list