[Samba] samba 4.11.4 Bad talloc magic value - unknown value
L. van Belle
belle at samba.org
Wed Jan 15 12:05:38 UTC 2020
Hai,
Short answer, because im hit by flue.
Remove/disable the self compiled version.
Add my repo for ubuntu.
Install samba, info here : apt.van-belle.nl
Or use the deb-src to pull all needed build depends in and compile again
yourself.
Greetz and hatshoe.
Louis
> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens
> Andrei Popa via samba
> Verzonden: dinsdag 14 januari 2020 18:36
> Aan: Rowland penny
> CC: samba at lists.samba.org
> Onderwerp: Re: [Samba] samba 4.11.4 Bad talloc magic value -
> unknown value
>
> Today I just did an apt-get update and upgrade before
> compiling samba and the error still persist.
> Thank you for the suggestion, this will be the way to go if
> nothing works, until then, is there a way that I can debug
> this error in order to find the problem ?
>
> > On 14 Jan 2020, at 18:21, Rowland penny via samba
> <samba at lists.samba.org> wrote:
> >
> > On 14/01/2020 16:06, Andrei Popa via samba wrote:
> >> Hi,
> >>
> >> I've build samba 4.11.4 from source on a Ubuntu 18.04.3
> and I'm using it as a domain controller.
> >> There are 3 domain controllers build the same way and all
> there are getting this error.
> >> The replication between them is ok and the ldap services
> are working ok.
> >>
> >> At every a couple of minutes I'm getting the following error.
> >> What could be the cause and how can I fix it ?
> >> After the error I've written more detailed information
> about samba installation and configuration.
> >> Thank you !
> >>
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: [2020/01/14
> 17:20:13.304916, 0]
> ../../source4/lib/cmdline/popt_common.c:74(popt_s4_talloc_log_fn)
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: Bad talloc
> magic value - unknown value
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: [2020/01/14
> 17:20:13.305299, 0] ../../lib/util/fault.c:132(smb_panic_default)
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]:
> smb_panic_default: PANIC (pid 10286): Bad talloc magic value
> - unknown value
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: [2020/01/14
> 17:20:13.307672, 0] ../../lib/util/fault.c:265(log_stack_trace)
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: BACKTRACE:
> 64 stack frames:
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #0
> /usr/local/samba/lib/libsamba-util.so.0(log_stack_trace+0x2e)
> [0x7fcd8f072bad]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #1
> /usr/local/samba/lib/libsamba-util.so.0(+0x20933) [0x7fcd8f072933]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #2
> /usr/local/samba/lib/libsamba-util.so.0(log_stack_trace+0)
> [0x7fcd8f072b7f]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #3
> /usr/local/samba/lib/private/libtalloc.so.2(+0x29ef) [0x7fcd8fd8b9ef]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #4
> /usr/local/samba/lib/private/libtalloc.so.2(+0x2a15) [0x7fcd8fd8ba15]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #5
> /usr/local/samba/lib/private/libtalloc.so.2(+0x2a93) [0x7fcd8fd8ba93]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #6
> /usr/local/samba/lib/private/libtalloc.so.2(+0x475f) [0x7fcd8fd8d75f]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #7
> /usr/local/samba/lib/private/libtalloc.so.2(talloc_check_name+
> 0x33) [0x7fcd8fd8d7f9]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #8
> /usr/local/samba/lib/ldb/partition.so(+0x52d3) [0x7fcd740442d3]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #9
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #10
> /usr/local/samba/lib/ldb/show_deleted.so(+0x1312) [0x7fcd71740312]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #11
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #12
> /usr/local/samba/lib/ldb/extended_dn_out.so(+0x3dec) [0x7fcd770efdec]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #13
> /usr/local/samba/lib/ldb/extended_dn_out.so(+0x3e2c) [0x7fcd770efe2c]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #14
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #15
> /usr/local/samba/lib/ldb/operational.so(+0x6b52) [0x7fcd7465fb52]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #16
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #17
> /usr/local/samba/lib/ldb/encrypted_secrets.so(+0x3e30)
> [0x7fcd774fce30]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #18
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #19
> /usr/local/samba/lib/ldb/rdn_name.so(+0x2ab1) [0x7fcd735c9ab1]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #20
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #21
> /usr/local/samba/lib/ldb/aclread.so(+0x3ae6) [0x7fcd7873dae6]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #22
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #23
> /usr/local/samba/lib/ldb/acl.so(+0x8875) [0x7fcd78948875]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #24
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #25
> /usr/local/samba/lib/ldb/descriptor.so(+0x47a2) [0x7fcd77d1e7a2]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #26
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #27
> /usr/local/samba/lib/ldb/extended_dn_in.so(+0x2e17) [0x7fcd772f5e17]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #28
> /usr/local/samba/lib/ldb/extended_dn_in.so(+0x33d6) [0x7fcd772f63d6]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #29
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #30
> /usr/local/samba/lib/ldb/asq.so(+0x1a6f) [0x7fcd78333a6f]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #31
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #32
> /usr/local/samba/lib/ldb/server_sort.so(+0x19eb) [0x7fcd719439eb]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #33
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #34
> /usr/local/samba/lib/ldb/anr.so(+0x1ae2) [0x7fcd78537ae2]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #35
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #36
> /usr/local/samba/lib/ldb/ranged_results.so(+0x1a88) [0x7fcd737cda88]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #37
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #38
> /usr/local/samba/lib/ldb/vlv.so(+0x2db5) [0x7fcd7031adb5]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #39
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #40
> /usr/local/samba/lib/ldb/paged_results.so(+0x295c) [0x7fcd7445695c]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #41
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #42
> /usr/local/samba/lib/ldb/dirsync.so(+0x4f59) [0x7fcd77b15f59]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #43
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #44
> /usr/local/samba/lib/ldb/lazy_commit.so(+0xd43) [0x7fcd766d1d43]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #45
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #46
> /usr/local/samba/lib/ldb/dsdb_notification.so(+0x1521)
> [0x7fcd77701521]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #47
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #48
> /usr/local/samba/lib/ldb/rootdse.so(+0x6c39) [0x7fcd72f8dc39]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #49
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #50
> /usr/local/samba/lib/ldb/resolve_oids.so(+0x1ffc) [0x7fcd7319cffc]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #51
> /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14
> f) [0x7fcd8fb58c09]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #52
> /usr/local/samba/lib/private/libldb.so.2(+0xb643) [0x7fcd8fb55643]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #53
> /usr/local/samba/lib/private/libldb.so.2(ldb_request+0x161)
> [0x7fcd8fb557ba]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #54
> /usr/local/samba/lib/ldb/asq.so(+0x1995) [0x7fcd78333995]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #55
> /usr/local/samba/lib/ldb/asq.so(+0x13a4) [0x7fcd783333a4]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #56
> /usr/local/samba/lib/private/libldb.so.2(ldb_module_done+0x1fc
> ) [0x7fcd8fb5a101]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #57
> /usr/local/samba/lib/private/libldb.so.2(+0xb343) [0x7fcd8fb55343]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #58
> /usr/local/samba/lib/private/libldb.so.2(ldb_module_done+0x1fc
> ) [0x7fcd8fb5a101]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #59
> /usr/local/samba/lib/ldb/extended_dn_in.so(+0x1a3a) [0x7fcd772f4a3a]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #60
> /usr/local/samba/lib/private/libldb.so.2(ldb_module_done+0x1fc
> ) [0x7fcd8fb5a101]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #61
> /usr/local/samba/lib/ldb/acl.so(+0x82cb) [0x7fcd789482cb]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #62
> /usr/local/samba/lib/private/libldb.so.2(ldb_module_done+0x1fc
> ) [0x7fcd8fb5a101]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #63
> /usr/local/samba/lib/ldb/aclread.so(+0x3481) [0x7fcd7873d481]
> >> 2020-01-14T17:20:13+02:00 dc04 samba[23314]: [2020/01/14
> 17:20:13.580079, 0]
> ../../source4/smbd/process_prefork.c:519(prefork_child_pipe_handler)
> >> 2020-01-14T17:20:13+02:00 dc04 samba[23314]:
> prefork_child_pipe_handler: Parent 23314, Child 10286
> terminated with signal 6
> >> 2020-01-14T17:20:13+02:00 dc04 samba[23314]: [2020/01/14
> 17:20:13.580406, 0]
> ../../source4/smbd/process_prefork.c:443(prefork_restart)
> >> 2020-01-14T17:20:13+02:00 dc04 samba[23314]:
> prefork_restart: Restarting [ldap] pre-fork worker in (120) seconds
> >>
> >> Samba was built from git only with "./configure
> --with-sendfile-support" option.
> >> Initially I was using bind9 for DNS but moved to internal
> samba DNS because I though it was an error generated by bind9
> but the errors kept showing.
> >>
> >> root at dc04:~# cat /usr/local/samba/etc/smb.conf
> >> # Global parameters
> >> [global]
> >> bind interfaces only = Yes
> >> interfaces = lo ens19
> >> netbios name = DC04
> >> realm = XXXX-XXX.LOCAL
> >> server role = active directory domain controller
> >> server services = s3fs, rpc, nbt, wrepl, ldap,
> cldap, kdc, drepl, winbindd, ntp_signd, kcc, dns
> >> workgroup = XXXX-XXX
> >> idmap_ldb:use rfc2307 = yes
> >> ldap server require strong auth = no
> >> dns forwarder = 10.253.50.5
> >>
> >> [sysvol]
> >> path = /usr/local/samba/var/locks/sysvol
> >> read only = No
> >>
> >> [netlogon]
> >> path =
> /usr/local/samba/var/locks/sysvol/xxxx-xxx.local/scripts
> >> read only = No
> >> root at dc04:~#
> >>
> >>
> >> root at dc04:~# cat /tmp/samba-debug-info.txt
> >> Collected config --- 2020-01-14-17:19 -----------
> >>
> >> Hostname: dc04
> >> DNS Domain: xxxx-xxx.local
> >> FQDN: dc04.xxxx-xxx.local
> >> ipaddress: 188.173.1.79 10.253.50.50
> >>
> >> -----------
> >>
> >> Kerberos SRV _kerberos._tcp.xxxx-xxx.local record verified
> ok, sample output:
> >> Server: 10.253.50.50
> >> Address: 10.253.50.50#53
> >>
> >> _kerberos._tcp.xxxx-xxx.local service = 0 100 88
> dc04.xxxx-xxx.local.
> >> _kerberos._tcp.xxxx-xxx.local service = 0 100 88
> dc03.xxxx-xxx.local.
> >> _kerberos._tcp.xxxx-xxx.local service = 0 100 88
> dc05.xxxx-xxx.local.
> >> Samba is running as an AD DC
> >>
> >> -----------
> >> Checking file: /etc/os-release
> >>
> >> NAME="Ubuntu"
> >> VERSION="18.04.3 LTS (Bionic Beaver)"
> >> ID=ubuntu
> >> ID_LIKE=debian
> >> PRETTY_NAME="Ubuntu 18.04.3 LTS"
> >> VERSION_ID="18.04"
> >> HOME_URL="https://www.ubuntu.com/"
> >> SUPPORT_URL="https://help.ubuntu.com/"
> >> BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/"
> >>
> PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-pol
icies/privacy-policy"
> >> VERSION_CODENAME=bionic
> >> UBUNTU_CODENAME=bionic
> >>
> >> -----------
> >>
> >>
> >> This computer is running Ubuntu 18.04.3 LTS x86_64
> >>
> >> -----------
> >> running command : ip a
> >> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue
> state UNKNOWN group default qlen 1000
> >> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> >> inet 127.0.0.1/8 scope host lo
> >> 2: ens18: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
> fq_codel state UP group default qlen 1000
> >> link/ether ba:f3:97:bb:b9:8a brd ff:ff:ff:ff:ff:ff
> >> inet xxx.xxx.xxx.xxx/25 brd 188.173.1.127 scope global ens18
> >> 3: ens19: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
> fq_codel state UP group default qlen 1000
> >> link/ether ae:54:fe:ed:c9:07 brd ff:ff:ff:ff:ff:ff
> >> inet 10.253.50.50/25 brd 10.253.50.127 scope global ens19
> >>
> >> -----------
> >> Checking file: /etc/hosts
> >>
> >> 127.0.0.1 localhost
> >> 10.253.50.50 dc04.xxxx-xxx.local dc04
> >>
> >> # The following lines are desirable for IPv6 capable hosts
> >> ::1 ip6-localhost ip6-loopback
> >> fe00::0 ip6-localnet
> >> ff00::0 ip6-mcastprefix
> >> ff02::1 ip6-allnodes
> >> ff02::2 ip6-allrouters
> >>
> >> -----------
> >>
> >> Checking file: /etc/resolv.conf
> >>
> >> nameserver 10.253.50.50
> >> search xxxx-xxx.local
> >>
> >> -----------
> >>
> >> Checking file: /etc/krb5.conf
> >>
> >> [libdefaults]
> >> dns_lookup_realm = false
> >> dns_lookup_kdc = true
> >> default_realm = xxxx-xxx.LOCAL
> >>
> >> -----------
> >>
> >> Checking file: /etc/nsswitch.conf
> >>
> >> # /etc/nsswitch.conf
> >> #
> >> # Example configuration of GNU Name Service Switch functionality.
> >> # If you have the `glibc-doc-reference' and `info'
> packages installed, try:
> >> # `info libc "Name Service Switch"' for information about
> this file.
> >>
> >> passwd: compat systemd
> >> group: compat systemd
> >> shadow: compat
> >> gshadow: files
> >>
> >> hosts: files dns
> >> networks: files
> >>
> >> protocols: db files
> >> services: db files
> >> ethers: db files
> >> rpc: db files
> >>
> >> netgroup: nis
> >>
> >> -----------
> >>
> >> Checking file: /usr/local/samba/etc/smb.conf
> >>
> >> # Global parameters
> >> [global]
> >> bind interfaces only = Yes
> >> interfaces = lo ens19
> >> netbios name = DC04
> >> realm = xxxx-xxx.LOCAL
> >> server role = active directory domain controller
> >> server services = s3fs, rpc, nbt, wrepl, ldap,
> cldap, kdc, drepl, winbindd, ntp_signd, kcc, dns
> >> workgroup = xxxx-xxx
> >> idmap_ldb:use rfc2307 = yes
> >> ldap server require strong auth = no
> >> dns forwarder = 10.253.50.5
> >>
> >> [sysvol]
> >> path = /usr/local/samba/var/locks/sysvol
> >> read only = No
> >>
> >> [netlogon]
> >> path =
> /usr/local/samba/var/locks/sysvol/xxxx-xxx.local/scripts
> >> read only = No
> >>
> >> -----------
> >>
> >> Detected bind DLZ enabled..
> >> Checking file: /etc/bind/named.conf
> >>
> >> // This is the primary configuration file for the BIND DNS
> server named.
> >> //
> >> // Please read /usr/share/doc/bind9/README.Debian.gz for
> information on the
> >> // structure of BIND configuration files in Debian,
> *BEFORE* you customize
> >> // this configuration file.
> >> //
> >> // If you are just adding zones, please do that in
> /etc/bind/named.conf.local
> >>
> >> include "/etc/bind/named.conf.options";
> >> include "/etc/bind/named.conf.local";
> >> include "/etc/bind/named.conf.default-zones";
> >> include "/usr/local/samba/bind-dns/named.conf";
> >>
> >> -----------
> >>
> >> Checking file: /etc/bind/named.conf.options
> >>
> >> options {
> >> directory "/var/cache/bind";
> >>
> >> auth-nxdomain no; # conform to RFC1035
> >> listen-on-v6 { none; };
> >> listen-on port 53 { 127.0.0.1; any; };
> >> tkey-gssapi-keytab "/usr/local/samba/private/dns.keytab";
> >> minimal-responses yes;
> >>
> >> allow-recursion { any; };
> >> allow-query { any; };
> >>
> >> dnssec-enable yes;
> >> dnssec-validation yes;
> >>
> >> forward only;
> >> forwarders {
> >> 10.253.50.5;
> >> };
> >> };
> >>
> >> -----------
> >>
> >> Checking file: /etc/bind/named.conf.local
> >>
> >> //
> >> // Do any local configuration here
> >> //
> >>
> >> // Consider adding the 1918 zones here, if they are not
> used in your
> >> // organization
> >> //include "/etc/bind/zones.rfc1918";
> >>
> >> -----------
> >>
> >> Checking file: /etc/bind/named.conf.default-zones
> >>
> >> // prime the server with knowledge of the root servers
> >> zone "." {
> >> type hint;
> >> file "/etc/bind/db.root";
> >> };
> >>
> >> // be authoritative for the localhost forward and reverse
> zones, and for
> >> // broadcast zones as per RFC 1912
> >>
> >> zone "localhost" {
> >> type master;
> >> file "/etc/bind/db.local";
> >> };
> >>
> >> zone "127.in-addr.arpa" {
> >> type master;
> >> file "/etc/bind/db.127";
> >> };
> >>
> >> zone "0.in-addr.arpa" {
> >> type master;
> >> file "/etc/bind/db.0";
> >> };
> >>
> >> zone "255.in-addr.arpa" {
> >> type master;
> >> file "/etc/bind/db.255";
> >> };
> >>
> >> -----------
> >>
> >> Samba DNS zone list: 2 zone(s) found
> >>
> >> pszZoneName : xxxx-xxx.local
> >> Flags : DNS_RPC_ZONE_DSINTEGRATED
> DNS_RPC_ZONE_UPDATE_SECURE
> >> ZoneType : DNS_ZONE_TYPE_PRIMARY
> >> Version : 50
> >> dwDpFlags : DNS_DP_AUTOCREATED
> DNS_DP_DOMAIN_DEFAULT DNS_DP_ENLISTED
> >> pszDpFqdn : DomainDnsZones.xxxx-xxx.local
> >>
> >> pszZoneName : _msdcs.xxxx-xxx.local
> >> Flags : DNS_RPC_ZONE_DSINTEGRATED
> DNS_RPC_ZONE_UPDATE_SECURE
> >> ZoneType : DNS_ZONE_TYPE_PRIMARY
> >> Version : 50
> >> dwDpFlags : DNS_DP_AUTOCREATED
> DNS_DP_FOREST_DEFAULT DNS_DP_ENLISTED
> >> pszDpFqdn : ForestDnsZones.xxxx-xxx.local
> >>
> >> Samba DNS zone list Automated check :
> >> zone : xxxx-xxx.local ok, no Bind flat-files found
> >> -----------
> >> zone : _msdcs.xxxx-xxx.local ok, no Bind flat-files found
> >> -----------
> >>
> >> Installed packages:
> >> ii acl 2.2.52-3build1
> amd64 Access control
> list utilities
> >> ii attr 1:2.4.47-2build1
> amd64 Utilities for
> manipulating filesystem extended attributes
> >> ii bind9
> 1:9.11.3+dfsg-1ubuntu1.11 amd64
> Internet Domain Name Server
> >> ii bind9-host
> 1:9.11.3+dfsg-1ubuntu1.11 amd64
> DNS lookup utility (deprecated)
> >> ii bind9utils
> 1:9.11.3+dfsg-1ubuntu1.11 amd64
> Utilities for BIND
> >> ii krb5-config 2.6
> all Configuration
> files for Kerberos Version 5
> >> ii krb5-locales 1.16-2ubuntu0.1
> all
> internationalization support for MIT Kerberos
> >> ii krb5-user 1.16-2ubuntu0.1
> amd64 basic programs to
> authenticate using MIT Kerberos
> >> ii libacl1:amd64 2.2.52-3build1
> amd64 Access control
> list shared library
> >> ii libacl1-dev 2.2.52-3build1
> amd64 Access control
> list static libraries and headers
> >> ii libattr1:amd64 1:2.4.47-2build1
> amd64 Extended
> attribute shared library
> >> ii libattr1-dev:amd64 1:2.4.47-2build1
> amd64 Extended
> attribute static libraries and headers
> >> ii libbind9-160:amd64
> 1:9.11.3+dfsg-1ubuntu1.11 amd64
> BIND9 Shared Library used by BIND
> >> ii libgssapi-krb5-2:amd64 1.16-2ubuntu0.1
> amd64 MIT Kerberos
> runtime libraries - krb5 GSS-API Mechanism
> >> ii libkrb5-26-heimdal:amd64 7.5.0+dfsg-1
> amd64 Heimdal Kerberos
> - libraries
> >> ii libkrb5-3:amd64 1.16-2ubuntu0.1
> amd64 MIT Kerberos
> runtime libraries
> >> ii libkrb5support0:amd64 1.16-2ubuntu0.1
> amd64 MIT Kerberos
> runtime libraries - Support library
> >> ii python3-attr 17.4.0-2
> all Attributes
> without boilerplate (Python 3)
> >>
> >> -----------
> >>
> >>
> >>
> >>
> > I have a feeling that you didn't have the most uptodate
> packages installed when you compiled Samba, can I suggest you
> use this repo: http://apt.van-belle.nl/ instead of compiling
> Samba yourself.
> >
> > Rowland
> >
> >
> >
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions: https://lists.samba.org/mailman/options/samba
>
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: https://lists.samba.org/mailman/options/samba
>
>
More information about the samba
mailing list