[Samba] samba 4.11.4 Bad talloc magic value - unknown value
Rowland penny
rpenny at samba.org
Tue Jan 14 16:21:05 UTC 2020
On 14/01/2020 16:06, Andrei Popa via samba wrote:
> Hi,
>
> I’ve build samba 4.11.4 from source on a Ubuntu 18.04.3 and I’m using it as a domain controller.
> There are 3 domain controllers build the same way and all there are getting this error.
> The replication between them is ok and the ldap services are working ok.
>
> At every a couple of minutes I’m getting the following error.
> What could be the cause and how can I fix it ?
> After the error I've written more detailed information about samba installation and configuration.
> Thank you !
>
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: [2020/01/14 17:20:13.304916, 0] ../../source4/lib/cmdline/popt_common.c:74(popt_s4_talloc_log_fn)
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: Bad talloc magic value - unknown value
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: [2020/01/14 17:20:13.305299, 0] ../../lib/util/fault.c:132(smb_panic_default)
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: smb_panic_default: PANIC (pid 10286): Bad talloc magic value - unknown value
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: [2020/01/14 17:20:13.307672, 0] ../../lib/util/fault.c:265(log_stack_trace)
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: BACKTRACE: 64 stack frames:
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #0 /usr/local/samba/lib/libsamba-util.so.0(log_stack_trace+0x2e) [0x7fcd8f072bad]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #1 /usr/local/samba/lib/libsamba-util.so.0(+0x20933) [0x7fcd8f072933]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #2 /usr/local/samba/lib/libsamba-util.so.0(log_stack_trace+0) [0x7fcd8f072b7f]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #3 /usr/local/samba/lib/private/libtalloc.so.2(+0x29ef) [0x7fcd8fd8b9ef]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #4 /usr/local/samba/lib/private/libtalloc.so.2(+0x2a15) [0x7fcd8fd8ba15]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #5 /usr/local/samba/lib/private/libtalloc.so.2(+0x2a93) [0x7fcd8fd8ba93]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #6 /usr/local/samba/lib/private/libtalloc.so.2(+0x475f) [0x7fcd8fd8d75f]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #7 /usr/local/samba/lib/private/libtalloc.so.2(talloc_check_name+0x33) [0x7fcd8fd8d7f9]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #8 /usr/local/samba/lib/ldb/partition.so(+0x52d3) [0x7fcd740442d3]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #9 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #10 /usr/local/samba/lib/ldb/show_deleted.so(+0x1312) [0x7fcd71740312]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #11 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #12 /usr/local/samba/lib/ldb/extended_dn_out.so(+0x3dec) [0x7fcd770efdec]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #13 /usr/local/samba/lib/ldb/extended_dn_out.so(+0x3e2c) [0x7fcd770efe2c]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #14 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #15 /usr/local/samba/lib/ldb/operational.so(+0x6b52) [0x7fcd7465fb52]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #16 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #17 /usr/local/samba/lib/ldb/encrypted_secrets.so(+0x3e30) [0x7fcd774fce30]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #18 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #19 /usr/local/samba/lib/ldb/rdn_name.so(+0x2ab1) [0x7fcd735c9ab1]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #20 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #21 /usr/local/samba/lib/ldb/aclread.so(+0x3ae6) [0x7fcd7873dae6]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #22 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #23 /usr/local/samba/lib/ldb/acl.so(+0x8875) [0x7fcd78948875]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #24 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #25 /usr/local/samba/lib/ldb/descriptor.so(+0x47a2) [0x7fcd77d1e7a2]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #26 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #27 /usr/local/samba/lib/ldb/extended_dn_in.so(+0x2e17) [0x7fcd772f5e17]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #28 /usr/local/samba/lib/ldb/extended_dn_in.so(+0x33d6) [0x7fcd772f63d6]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #29 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #30 /usr/local/samba/lib/ldb/asq.so(+0x1a6f) [0x7fcd78333a6f]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #31 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #32 /usr/local/samba/lib/ldb/server_sort.so(+0x19eb) [0x7fcd719439eb]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #33 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #34 /usr/local/samba/lib/ldb/anr.so(+0x1ae2) [0x7fcd78537ae2]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #35 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #36 /usr/local/samba/lib/ldb/ranged_results.so(+0x1a88) [0x7fcd737cda88]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #37 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #38 /usr/local/samba/lib/ldb/vlv.so(+0x2db5) [0x7fcd7031adb5]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #39 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #40 /usr/local/samba/lib/ldb/paged_results.so(+0x295c) [0x7fcd7445695c]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #41 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #42 /usr/local/samba/lib/ldb/dirsync.so(+0x4f59) [0x7fcd77b15f59]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #43 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #44 /usr/local/samba/lib/ldb/lazy_commit.so(+0xd43) [0x7fcd766d1d43]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #45 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #46 /usr/local/samba/lib/ldb/dsdb_notification.so(+0x1521) [0x7fcd77701521]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #47 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #48 /usr/local/samba/lib/ldb/rootdse.so(+0x6c39) [0x7fcd72f8dc39]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #49 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #50 /usr/local/samba/lib/ldb/resolve_oids.so(+0x1ffc) [0x7fcd7319cffc]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #51 /usr/local/samba/lib/private/libldb.so.2(ldb_next_request+0x14f) [0x7fcd8fb58c09]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #52 /usr/local/samba/lib/private/libldb.so.2(+0xb643) [0x7fcd8fb55643]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #53 /usr/local/samba/lib/private/libldb.so.2(ldb_request+0x161) [0x7fcd8fb557ba]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #54 /usr/local/samba/lib/ldb/asq.so(+0x1995) [0x7fcd78333995]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #55 /usr/local/samba/lib/ldb/asq.so(+0x13a4) [0x7fcd783333a4]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #56 /usr/local/samba/lib/private/libldb.so.2(ldb_module_done+0x1fc) [0x7fcd8fb5a101]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #57 /usr/local/samba/lib/private/libldb.so.2(+0xb343) [0x7fcd8fb55343]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #58 /usr/local/samba/lib/private/libldb.so.2(ldb_module_done+0x1fc) [0x7fcd8fb5a101]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #59 /usr/local/samba/lib/ldb/extended_dn_in.so(+0x1a3a) [0x7fcd772f4a3a]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #60 /usr/local/samba/lib/private/libldb.so.2(ldb_module_done+0x1fc) [0x7fcd8fb5a101]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #61 /usr/local/samba/lib/ldb/acl.so(+0x82cb) [0x7fcd789482cb]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #62 /usr/local/samba/lib/private/libldb.so.2(ldb_module_done+0x1fc) [0x7fcd8fb5a101]
> 2020-01-14T17:20:13+02:00 dc04 samba[10286]: #63 /usr/local/samba/lib/ldb/aclread.so(+0x3481) [0x7fcd7873d481]
> 2020-01-14T17:20:13+02:00 dc04 samba[23314]: [2020/01/14 17:20:13.580079, 0] ../../source4/smbd/process_prefork.c:519(prefork_child_pipe_handler)
> 2020-01-14T17:20:13+02:00 dc04 samba[23314]: prefork_child_pipe_handler: Parent 23314, Child 10286 terminated with signal 6
> 2020-01-14T17:20:13+02:00 dc04 samba[23314]: [2020/01/14 17:20:13.580406, 0] ../../source4/smbd/process_prefork.c:443(prefork_restart)
> 2020-01-14T17:20:13+02:00 dc04 samba[23314]: prefork_restart: Restarting [ldap] pre-fork worker in (120) seconds
>
> Samba was built from git only with “./configure --with-sendfile-support” option.
> Initially I was using bind9 for DNS but moved to internal samba DNS because I though it was an error generated by bind9 but the errors kept showing.
>
> root at dc04:~# cat /usr/local/samba/etc/smb.conf
> # Global parameters
> [global]
> bind interfaces only = Yes
> interfaces = lo ens19
> netbios name = DC04
> realm = XXXX-XXX.LOCAL
> server role = active directory domain controller
> server services = s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl, winbindd, ntp_signd, kcc, dns
> workgroup = XXXX-XXX
> idmap_ldb:use rfc2307 = yes
> ldap server require strong auth = no
> dns forwarder = 10.253.50.5
>
> [sysvol]
> path = /usr/local/samba/var/locks/sysvol
> read only = No
>
> [netlogon]
> path = /usr/local/samba/var/locks/sysvol/xxxx-xxx.local/scripts
> read only = No
> root at dc04:~#
>
>
> root at dc04:~# cat /tmp/samba-debug-info.txt
> Collected config --- 2020-01-14-17:19 -----------
>
> Hostname: dc04
> DNS Domain: xxxx-xxx.local
> FQDN: dc04.xxxx-xxx.local
> ipaddress: 188.173.1.79 10.253.50.50
>
> -----------
>
> Kerberos SRV _kerberos._tcp.xxxx-xxx.local record verified ok, sample output:
> Server: 10.253.50.50
> Address: 10.253.50.50#53
>
> _kerberos._tcp.xxxx-xxx.local service = 0 100 88 dc04.xxxx-xxx.local.
> _kerberos._tcp.xxxx-xxx.local service = 0 100 88 dc03.xxxx-xxx.local.
> _kerberos._tcp.xxxx-xxx.local service = 0 100 88 dc05.xxxx-xxx.local.
> Samba is running as an AD DC
>
> -----------
> Checking file: /etc/os-release
>
> NAME="Ubuntu"
> VERSION="18.04.3 LTS (Bionic Beaver)"
> ID=ubuntu
> ID_LIKE=debian
> PRETTY_NAME="Ubuntu 18.04.3 LTS"
> VERSION_ID="18.04"
> HOME_URL="https://www.ubuntu.com/"
> SUPPORT_URL="https://help.ubuntu.com/"
> BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/"
> PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy"
> VERSION_CODENAME=bionic
> UBUNTU_CODENAME=bionic
>
> -----------
>
>
> This computer is running Ubuntu 18.04.3 LTS x86_64
>
> -----------
> running command : ip a
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> inet 127.0.0.1/8 scope host lo
> 2: ens18: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
> link/ether ba:f3:97:bb:b9:8a brd ff:ff:ff:ff:ff:ff
> inet xxx.xxx.xxx.xxx/25 brd 188.173.1.127 scope global ens18
> 3: ens19: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
> link/ether ae:54:fe:ed:c9:07 brd ff:ff:ff:ff:ff:ff
> inet 10.253.50.50/25 brd 10.253.50.127 scope global ens19
>
> -----------
> Checking file: /etc/hosts
>
> 127.0.0.1 localhost
> 10.253.50.50 dc04.xxxx-xxx.local dc04
>
> # The following lines are desirable for IPv6 capable hosts
> ::1 ip6-localhost ip6-loopback
> fe00::0 ip6-localnet
> ff00::0 ip6-mcastprefix
> ff02::1 ip6-allnodes
> ff02::2 ip6-allrouters
>
> -----------
>
> Checking file: /etc/resolv.conf
>
> nameserver 10.253.50.50
> search xxxx-xxx.local
>
> -----------
>
> Checking file: /etc/krb5.conf
>
> [libdefaults]
> dns_lookup_realm = false
> dns_lookup_kdc = true
> default_realm = xxxx-xxx.LOCAL
>
> -----------
>
> Checking file: /etc/nsswitch.conf
>
> # /etc/nsswitch.conf
> #
> # Example configuration of GNU Name Service Switch functionality.
> # If you have the `glibc-doc-reference' and `info' packages installed, try:
> # `info libc "Name Service Switch"' for information about this file.
>
> passwd: compat systemd
> group: compat systemd
> shadow: compat
> gshadow: files
>
> hosts: files dns
> networks: files
>
> protocols: db files
> services: db files
> ethers: db files
> rpc: db files
>
> netgroup: nis
>
> -----------
>
> Checking file: /usr/local/samba/etc/smb.conf
>
> # Global parameters
> [global]
> bind interfaces only = Yes
> interfaces = lo ens19
> netbios name = DC04
> realm = xxxx-xxx.LOCAL
> server role = active directory domain controller
> server services = s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl, winbindd, ntp_signd, kcc, dns
> workgroup = xxxx-xxx
> idmap_ldb:use rfc2307 = yes
> ldap server require strong auth = no
> dns forwarder = 10.253.50.5
>
> [sysvol]
> path = /usr/local/samba/var/locks/sysvol
> read only = No
>
> [netlogon]
> path = /usr/local/samba/var/locks/sysvol/xxxx-xxx.local/scripts
> read only = No
>
> -----------
>
> Detected bind DLZ enabled..
> Checking file: /etc/bind/named.conf
>
> // This is the primary configuration file for the BIND DNS server named.
> //
> // Please read /usr/share/doc/bind9/README.Debian.gz for information on the
> // structure of BIND configuration files in Debian, *BEFORE* you customize
> // this configuration file.
> //
> // If you are just adding zones, please do that in /etc/bind/named.conf.local
>
> include "/etc/bind/named.conf.options";
> include "/etc/bind/named.conf.local";
> include "/etc/bind/named.conf.default-zones";
> include "/usr/local/samba/bind-dns/named.conf";
>
> -----------
>
> Checking file: /etc/bind/named.conf.options
>
> options {
> directory "/var/cache/bind";
>
> auth-nxdomain no; # conform to RFC1035
> listen-on-v6 { none; };
> listen-on port 53 { 127.0.0.1; any; };
> tkey-gssapi-keytab "/usr/local/samba/private/dns.keytab";
> minimal-responses yes;
>
> allow-recursion { any; };
> allow-query { any; };
>
> dnssec-enable yes;
> dnssec-validation yes;
>
> forward only;
> forwarders {
> 10.253.50.5;
> };
> };
>
> -----------
>
> Checking file: /etc/bind/named.conf.local
>
> //
> // Do any local configuration here
> //
>
> // Consider adding the 1918 zones here, if they are not used in your
> // organization
> //include "/etc/bind/zones.rfc1918";
>
> -----------
>
> Checking file: /etc/bind/named.conf.default-zones
>
> // prime the server with knowledge of the root servers
> zone "." {
> type hint;
> file "/etc/bind/db.root";
> };
>
> // be authoritative for the localhost forward and reverse zones, and for
> // broadcast zones as per RFC 1912
>
> zone "localhost" {
> type master;
> file "/etc/bind/db.local";
> };
>
> zone "127.in-addr.arpa" {
> type master;
> file "/etc/bind/db.127";
> };
>
> zone "0.in-addr.arpa" {
> type master;
> file "/etc/bind/db.0";
> };
>
> zone "255.in-addr.arpa" {
> type master;
> file "/etc/bind/db.255";
> };
>
> -----------
>
> Samba DNS zone list: 2 zone(s) found
>
> pszZoneName : xxxx-xxx.local
> Flags : DNS_RPC_ZONE_DSINTEGRATED DNS_RPC_ZONE_UPDATE_SECURE
> ZoneType : DNS_ZONE_TYPE_PRIMARY
> Version : 50
> dwDpFlags : DNS_DP_AUTOCREATED DNS_DP_DOMAIN_DEFAULT DNS_DP_ENLISTED
> pszDpFqdn : DomainDnsZones.xxxx-xxx.local
>
> pszZoneName : _msdcs.xxxx-xxx.local
> Flags : DNS_RPC_ZONE_DSINTEGRATED DNS_RPC_ZONE_UPDATE_SECURE
> ZoneType : DNS_ZONE_TYPE_PRIMARY
> Version : 50
> dwDpFlags : DNS_DP_AUTOCREATED DNS_DP_FOREST_DEFAULT DNS_DP_ENLISTED
> pszDpFqdn : ForestDnsZones.xxxx-xxx.local
>
> Samba DNS zone list Automated check :
> zone : xxxx-xxx.local ok, no Bind flat-files found
> -----------
> zone : _msdcs.xxxx-xxx.local ok, no Bind flat-files found
> -----------
>
> Installed packages:
> ii acl 2.2.52-3build1 amd64 Access control list utilities
> ii attr 1:2.4.47-2build1 amd64 Utilities for manipulating filesystem extended attributes
> ii bind9 1:9.11.3+dfsg-1ubuntu1.11 amd64 Internet Domain Name Server
> ii bind9-host 1:9.11.3+dfsg-1ubuntu1.11 amd64 DNS lookup utility (deprecated)
> ii bind9utils 1:9.11.3+dfsg-1ubuntu1.11 amd64 Utilities for BIND
> ii krb5-config 2.6 all Configuration files for Kerberos Version 5
> ii krb5-locales 1.16-2ubuntu0.1 all internationalization support for MIT Kerberos
> ii krb5-user 1.16-2ubuntu0.1 amd64 basic programs to authenticate using MIT Kerberos
> ii libacl1:amd64 2.2.52-3build1 amd64 Access control list shared library
> ii libacl1-dev 2.2.52-3build1 amd64 Access control list static libraries and headers
> ii libattr1:amd64 1:2.4.47-2build1 amd64 Extended attribute shared library
> ii libattr1-dev:amd64 1:2.4.47-2build1 amd64 Extended attribute static libraries and headers
> ii libbind9-160:amd64 1:9.11.3+dfsg-1ubuntu1.11 amd64 BIND9 Shared Library used by BIND
> ii libgssapi-krb5-2:amd64 1.16-2ubuntu0.1 amd64 MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
> ii libkrb5-26-heimdal:amd64 7.5.0+dfsg-1 amd64 Heimdal Kerberos - libraries
> ii libkrb5-3:amd64 1.16-2ubuntu0.1 amd64 MIT Kerberos runtime libraries
> ii libkrb5support0:amd64 1.16-2ubuntu0.1 amd64 MIT Kerberos runtime libraries - Support library
> ii python3-attr 17.4.0-2 all Attributes without boilerplate (Python 3)
>
> -----------
>
>
>
>
I have a feeling that you didn't have the most uptodate packages
installed when you compiled Samba, can I suggest you use this repo:
http://apt.van-belle.nl/ instead of compiling Samba yourself.
Rowland
More information about the samba
mailing list