[Samba] [PATCH] Re: Failing replication

Mon Feb 10 10:16:27 UTC 2020

Hai Alexander, 

I had a quick look, sorry for all the absence but im very buzzy atm with some office work. 

A quick howto for add this in the "debian" way. 
If you run apt-get source against my repo, all sources are there. 

So.
apt-get source samba

cd  samba-4.11.6+dfsg/debian/patches
Add the patch-file here. 

editor series
Add the name of the patch on the bottem. 

Now, to make sure your patch is in the package you rename the package in the changelog. 
cd ..
editor changelog
Rename this : samba (2:4.11.6+dfsg-0.1buster1)
To 
samba (2:4.11.6+dfsg-0.1buster1.1)

That makes sure if im upgradeing or adding patches your in the upgrade path again of my repo. 
If i add new patches, my packages are named : samba (2:4.11.6+dfsg-0.1buster2)

2:4.11.6+dfsg-0    - official debian nameing
2:4.11.6+dfsg-0.1  - my addition, and note, 0. is not released by debian anything as of -1 is. 

After above change. 

cd ../..

apt-get build-dep samba
apt-get source samba -b
Because samba is already extacted, it will pickup the current dir incl the changes. 
And build the new packages. 

Now of manually install them, of setup a local repo and add them there. 

Good luck,

If the patch works out, i'll add it to my packages. 

Greetz, 

Louis

> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens 
> Alexander Harm via samba
> Verzonden: maandag 10 februari 2020 10:49
> Aan: samba at lists.samba.org
> Onderwerp: Re: [Samba] [PATCH] Re: Failing replication
> 
> Hi there,
> 
> I would like to continue on this one. I applied the patch but 
> am wondering which package it influences.
> 
> If it is just the two mentioned than it did not fix the error.
> 
> Regards, Alexander
> 
> 
> 
> 
> On 8. February 2020 at 09:46:11, Alexander Harm 
> (alexander.harm at apfel-q.de) wrote:
> 
> Hi Andrew,
> 
> I applied your patch to the Debian packages of Louis.
> 
> Do you happen to know in which package it will end up? Tried 
> samba and samba-dsdb-modules but the error remains the same.
> 
> Alexander
> 
> 
> 
> 
> On 8. February 2020 at 01:38:25, Alexander Harm 
> (alexander.harm at apfel-q.de) wrote:
> 
> Hi Andrew,
> 
> you can use my name if you want (Alexander Harm). I will try 
> and build with your patch.
> 
> Alexander
> 
> 
> 
> 
> On 8. February 2020 at 00:30:02, Andrew Bartlett 
> (abartlet at samba.org) wrote:
> 
> Thanks. At this stage is looks like a bug in the repl_meta_data
> module.
> 
> Try the attached patch.
> 
> Can I name you in the bug and is there any affiliation (eg employer)
> you would like named?
> 
> I've filed a bug and will file a merge request once I have a test to
> confirm this.
> 
> https://bugzilla.samba.org/show_bug.cgi?id=14272
> 
> Thanks!
> 
> Andrew Bartlett
> 
> On Fri, 2020-02-07 at 23:34 +0100, Alexander Harm via samba wrote:
> > Hi,
> >
> > as instructed I upgraded to “Version 4.11.6-Debian”.
> >
> > Attached the new debug file.
> >
> > Regards, Alexander
> >
> >
> >
> >
> > On 7. February 2020 at 10:01:02, Andrew Bartlett via samba 
> (samba at lists.samba.org) wrote:
> >
> > I would fix that first, please run Samba 4.11.
> >
> > We have done much on replication since then and I'm keen to rule out
> > things we have already fixed before digging into this further.
> >
> > Thanks!
> >
> > Andrew Bartlett
> >
> > On Fri, 2020-02-07 at 09:55 +0100, Alexander Harm via samba wrote:
> > > Version 4.9.5-Debian
> > >
> > >
> > >
> > >
> > > On 7. February 2020 at 09:55:02, Andrew Bartlett via 
> samba (samba at lists.samba.org) wrote:
> > >
> > > Much better. What Samba version is this?
> > >
> > > Andrew Bartlett
> > >
> > > On Fri, 2020-02-07 at 09:44 +0100, Alexander Harm via samba wrote:
> > > > Is this better?
> > > >
> > > >
> > > >
> > > >
> > > > On 7. February 2020 at 09:42:01, Andrew Bartlett via 
> samba (samba at lists.samba.org) wrote:
> > > >
> > > > I mean the final columns, not lines. There are long 
> lines that seem to
> > > > be cut off mid-word, rather than wrapped.
> > > >
> > > > Andrew Bartlett
> > > >
> > > > On Fri, 2020-02-07 at 09:14 +0100, Alexander Harm via 
> samba wrote:
> > > > > I did but these are the last lines. It ends with 
> “raise e” also in the shell.
> > > > >
> > > > > I also ran it on the other DCs and they all end with 
> “raise e”.
> > > > >
> > > > > Alexander
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > On 7. February 2020 at 09:12:02, Andrew Bartlett 
> (abartlet at samba.org) wrote:
> > > > >
> > > > > G'Day Alexander,
> > > > >
> > > > > It looks like you have copied the logs out of a 
> terminal and lost the
> > > > > ends of the lines. Those have the critical (groan...) 
> details of what
> > > > > went wrong with the apparent 'critical extension' failure.
> > > > >
> > > > > Can you try and get those and I'll look at them tomorrow.
> > > > >
> > > > > Thanks!
> > > > >
> > > > > Andrew Bartlett
> > > > >
> > > > > On Fri, 2020-02-07 at 08:56 +0100, Alexander Harm via 
> samba wrote:
> > > > > > Hi Andrew,
> > > > > >
> > > > > > thanks for your reply. Find attached the output of 
> the command. Looks like it fails on renaming an object to me.
> > > > > >
> > > > > > Regards, Alexander
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > On 7. February 2020 at 08:50:02, Andrew Bartlett 
> via samba (samba at lists.samba.org) wrote:
> > > > > >
> > > > > > On Wed, 2020-02-05 at 23:41 +0100, Alexander Harm 
> via samba wrote:
> > > > > > > Hello,
> > > > > > >
> > > > > > > we could need some help resolving a replication 
> issue we experience since one week.
> > > > > > >
> > > > > > > Running samba-tool drs replicate ka-h9-dc02 
> VMDC-AZURE-01 dc=ds,dc=example,dc=com --sync-all -d 9 returns
> > > > > >
> > > > > > Do that again with --local and we should get a 
> better set of info in
> > > > > > the logs.
> > > > > >
> > > > > > Andrew Bartlett
> > > > > > --
> > > > > > Andrew Bartlett http://samba.org/~abartlet/
> > > > > > Authentication Developer, Samba Team http://samba.org
> > > > > > Samba Developer, Catalyst IT 
> http://catalyst.net.nz/services/samba
> > > > > >
> > > > > >
> > > > > >
> > > > > --
> > > > > Andrew Bartlett http://samba.org/~abartlet/
> > > > > Authentication Developer, Samba Team http://samba.org
> > > > > Samba Developer, Catalyst IT 
> http://catalyst.net.nz/services/samba
> > > > >
> > > > >
> > > > --
> > > > Andrew Bartlett http://samba.org/~abartlet/
> > > > Authentication Developer, Samba Team http://samba.org
> > > > Samba Developer, Catalyst IT 
> http://catalyst.net.nz/services/samba
> > > >
> > > >
> > > >
> > > > --
> > > > To unsubscribe from this list go to the following URL 
> and read the
> > > > instructions: https://lists.samba.org/mailman/options/samba
> > > --
> > > Andrew Bartlett http://samba.org/~abartlet/
> > > Authentication Developer, Samba Team http://samba.org
> > > Samba Developer, Catalyst IT http://catalyst.net.nz/services/samba
> > >
> > >
> > >
> > > --
> > > To unsubscribe from this list go to the following URL and read the
> > > instructions: https://lists.samba.org/mailman/options/samba
> > --
> > Andrew Bartlett http://samba.org/~abartlet/
> > Authentication Developer, Samba Team http://samba.org
> > Samba Developer, Catalyst IT http://catalyst.net.nz/services/samba
> >
> >
> >
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions: https://lists.samba.org/mailman/options/samba
> --
> Andrew Bartlett http://samba.org/~abartlet/
> Authentication Developer, Samba Team http://samba.org
> Samba Developer, Catalyst IT http://catalyst.net.nz/services/samba
> 
> -- 
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
> 
> 