[Samba] Getent doesn't show AD users/groups

[L.P.H. van Belle]

I forgot to mention. 

if you dont use networkmanager, remove it. 
if you do. Then resolvconf is also involved. If not, then do install it. 

then 
sudo nano /etc/resolvconf/resolv.conf.d/head 

search  $(hostname -d)
nameserver <ip_of_nameserver>

save
sudo resolvconf -u



> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens L.P.H. van Belle
> via samba
> Verzonden: dinsdag 15 december 2020 15:37
> Aan: samba at lists.samba.org
> Onderwerp: Re: [Samba] Getent doesn't show AD users/groups
> 
> What Rowland said...
> 
> I alway im get a support call here in the office when im typing this..
> and then i can remove 80% of my reply ;-) but thanks for the replies
> Rowland
> :-)  So in addition.
> 
> resolv.conf
> search domain.tld # MUST be the primary dns domain you setup samba with.
> nameserver IP_OF_THIS_SERVER
> 
> And not 127.0.0.1 because that does not resolv to you hostname.
> 
> FQDN: server1.example.com
> 172.16.0.1    server1.example.com
> The others, or add behind the above line, or add it as CNAME in dns.
> Just use 1 line per ipadres and the first one is always the "real"
> hostname.
> 
> beside that, most look ok, these changes should already fix it..
> first fix it, then upgrade!
> and make sure smb.conf is trimmed down to minimal settings that helps
> while your upgrading.
> 
> 
> greetz,
> 
> Louis
> 
> 
> 
> > -----Oorspronkelijk bericht-----
> > Van: samba [mailto:samba-bounces at lists.samba.org] Namens Rowland penny
> via
> > samba
> > Verzonden: dinsdag 15 december 2020 15:18
> > Aan: samba at lists.samba.org
> > Onderwerp: Re: [Samba] Getent doesn't show AD users/groups
> >
> > On 15/12/2020 13:58, Alex Orlov via samba wrote:
> > > This is the result of that script
> > >
> >
> > Alex, first upgrade your distro, Debian 8 is extremely old, once
> > upgraded to Debian 10, use the Samba packages from here:
> > http://apt.van-belle.nl/
> >
> > Now explain this lot:
> >
> > DNS Domain: example.com
> > FQDN: server1.example.com
> > 172.16.0.1    server1.example.com
> > 172.16.0.1    fileserver1.server1.example.com
> > 172.16.0.1    server1.server1.example.com
> >
> > search server1.example.com
> >
> > default_realm = SERVER1.EXAMPLE.COM
> >
> > For a start, the DNS domain does not match the realm, but the realm does
> > match the DC's FQDN
> >
> > Rowland
> >
> >
> >
> >
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions:  https://lists.samba.org/mailman/options/samba
> 
> 
> 
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba