[Samba] DNS question
rpenny at samba.org
Thu Sep 5 10:25:11 UTC 2019
On 05/09/2019 11:14, L.P.H. van Belle via samba wrote:
> This does not look bad, pretty ok.
> But im do have a question here.
>> ipaddress: 10.103.1.6 X.X.103.1
> This indicated that the primary interface is eno2
>> 2: eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
>> inet 10.103.1.6/24 brd 10.103.1.255 scope global eno2
>> 3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
>> inet X.X.103.1/22 brd X.X.103.255 scope global eno1
> Since im not seeing the routing table that could be a point of improvement.
> Check the default with : route |grep default
> Hostfile only has
>> X.X.103.1 dc1.xxx.yyy.zzz dc1
> Kerberos points to : X.X.103.1
> Smb.conf point to eno1 ( X.X.103.1 )
>> interfaces = lo eno1
> That the first what is see.
> To that is the ptr record set of dc1 ? Ip off eno1 or eno2?
At last, I saw something you didn't ;-)
Shouldn't the 'private' in the first path be 'bind-dns' ?
I would also suggest the OP reads this:
More information about the samba