[Samba] message error NT_STATUS_OBJECT_NAME_NOT_FOUND regulary in the log
nathalie ramat
nathalie.ramat at univ-littoral.fr
Wed Oct 16 09:59:21 UTC 2019
Le 16/10/2019 à 11:17, Rowland penny via samba a écrit :
> On 16/10/2019 09:43, nathalie ramat wrote:
>>
>> I put the trace of the script :
> OK, only two problems, one minor, one possibly catastrophic ;-)
>>
>> Collected config --- 2019-10-16-10:23 -----------
>>
>> Â Â Â Â Â Â Checking file: /etc/hosts
>>
>> 127.0.0.1Â Â Â localhost
>> 192.168.xx.230Â Â Â blueyestest.sambadom.calais.fr
>> sambadom.calais.fr blueyestest
>
> You should only have the domain once i.e.
>
> 192.168.xx.230 blueyestest.sambadom.calais.fr blueyetest
>
ok -
>>
>> # The following lines are desirable for IPv6 capable hosts
>> ::1Â Â Â Â localhost ip6-localhost ip6-loopback
>> ff02::1 ip6-allnodes
>> ff02::2 ip6-allrouters
>>
>> -----------
>>
>>    Warning, does not exist
>>
>> -----------
>
> And there is the catastrophic bit. you do not seem to have a smb.conf
> file.
>
> Rowland
>
>
>
>
>
my smb.conf is locate at /etc/samba
I put the new trace
Collected config --- 2019-10-16-11:48 -----------
Hostname: blueyestest
DNS Domain: sambadom.calais.fr
FQDN: blueyestest.sambadom.calais.fr
ipaddress: 192.168.xx.230
-----------
Kerberos SRV _kerberos._tcp.sambadom.calais.fr record verified ok,
sample output:
Server: 192.168.xx.230
Address: 192.168.xx.230#53
_kerberos._tcp.sambadom.calais.fr service = 0 100 88
blueyestest.sambadom.calais.fr.
Samba is running as an AD DC
-----------
Checking file: /etc/os-release
PRETTY_NAME="Debian GNU/Linux bullseye/sid"
NAME="Debian GNU/Linux"
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"
-----------
This computer is running Debian bullseye/sid x86_64
-----------
running command : ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
2: ens18: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP group default qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
inet 192.168.xx.230/24 brd 192.168.22.255 scope global ens18
-----------
Checking file: /etc/hosts
127.0.0.1 localhost
192.168.xx.230 blueyestest.sambadom.calais.fr blueyestest
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
-----------
Checking file: /etc/resolv.conf
nameserver 192.168.xx.230
nameserver xxx.xx.xxx.xx
-----------
Checking file: /etc/krb5.conf
[libdefaults]
default_realm = SAMBADOM.CALAIS.FR
dns_lookup_realm = false
dns_lookup_kdc = true
# The following krb5.conf variables are only for MIT Kerberos.
kdc_timesync = 1
ccache_type = 4
forwardable = true
proxiable = true
# The following encryption type specification will be used by MIT Kerberos
# if uncommented. In general, the defaults in the MIT Kerberos code are
# correct and overriding these specifications only serves to disable new
# encryption types as they are added, creating interoperability problems.
#
# The only time when you might need to uncomment these lines and change
# the enctypes is if you have local software that will break on ticket
# caches containing ticket encryption types it doesn't know about (such as
# old versions of Sun Java).
# default_tgs_enctypes = des3-hmac-sha1
# default_tkt_enctypes = des3-hmac-sha1
# permitted_enctypes = des3-hmac-sha1
# The following libdefaults parameters are only for Heimdal Kerberos.
fcc-mit-ticketflags = true
[realms]
SAMBADOM.CALAIS.FR = {
kdc = blueyestest.sambadom.calais.fr
admin_server = blueyestest.sambadom.calais.fr
}
ATHENA.MIT.EDU = {
kdc = kerberos.mit.edu
kdc = kerberos-1.mit.edu
kdc = kerberos-2.mit.edu:88
admin_server = kerberos.mit.edu
default_domain = mit.edu
}
ZONE.MIT.EDU = {
kdc = casio.mit.edu
kdc = seiko.mit.edu
admin_server = casio.mit.edu
}
CSAIL.MIT.EDU = {
admin_server = kerberos.csail.mit.edu
default_domain = csail.mit.edu
}
IHTFP.ORG = {
kdc = kerberos.ihtfp.org
admin_server = kerberos.ihtfp.org
}
1TS.ORG = {
kdc = kerberos.1ts.org
admin_server = kerberos.1ts.org
}
ANDREW.CMU.EDU = {
admin_server = kerberos.andrew.cmu.edu
default_domain = andrew.cmu.edu
}
CS.CMU.EDU = {
kdc = kerberos-1.srv.cs.cmu.edu
kdc = kerberos-2.srv.cs.cmu.edu
kdc = kerberos-3.srv.cs.cmu.edu
admin_server = kerberos.cs.cmu.edu
}
DEMENTIA.ORG = {
kdc = kerberos.dementix.org
kdc = kerberos2.dementix.org
admin_server = kerberos.dementix.org
}
stanford.edu = {
kdc = krb5auth1.stanford.edu
kdc = krb5auth2.stanford.edu
kdc = krb5auth3.stanford.edu
master_kdc = krb5auth1.stanford.edu
admin_server = krb5-admin.stanford.edu
default_domain = stanford.edu
}
UTORONTO.CA = {
kdc = kerberos1.utoronto.ca
kdc = kerberos2.utoronto.ca
kdc = kerberos3.utoronto.ca
admin_server = kerberos1.utoronto.ca
default_domain = utoronto.ca
}
[domain_realm]
.mit.edu = ATHENA.MIT.EDU
mit.edu = ATHENA.MIT.EDU
.media.mit.edu = MEDIA-LAB.MIT.EDU
media.mit.edu = MEDIA-LAB.MIT.EDU
.csail.mit.edu = CSAIL.MIT.EDU
csail.mit.edu = CSAIL.MIT.EDU
.whoi.edu = ATHENA.MIT.EDU
whoi.edu = ATHENA.MIT.EDU
.stanford.edu = stanford.edu
.slac.stanford.edu = SLAC.STANFORD.EDU
.toronto.edu = UTORONTO.CA
.utoronto.ca = UTORONTO.CA
-----------
Checking file: /etc/nsswitch.conf
# /etc/nsswitch.conf
#
# Example configuration of GNU Name Service Switch functionality.
# If you have the `glibc-doc-reference' and `info' packages installed, try:
# `info libc "Name Service Switch"' for information about this file.
passwd: files systemd
group: files systemd
shadow: files
gshadow: files
hosts: files mdns4_minimal [NOTFOUND=return] dns
networks: files
protocols: db files
services: db files
ethers: db files
rpc: db files
netgroup: nis
-----------
Checking file: /etc/samba/smb.conf
# Global parameters
[global]
dns forwarder = 192.168.xx.230
netbios name = BLUEYESTEST
realm = SAMBADOM.CALAIS.FR
server role = active directory domain controller
workgroup = SAMBADOM
idmap_ldb:use rfc2307 = yes
log level = 3
log file = /var/log/samba/log.%M
[sysvol]
path = /var/lib/samba/sysvol
read only = No
[netlogon]
path = /var/lib/samba/sysvol/sambadom.calais.fr/scripts
read only = No
-----------
*BIND_DLZ not detected in smb.conf --Why i have this message - I choose
samba_internal with i used samba-tool domain *
-----------
Installed packages:
ii acl 2.2.53-5 amd64 access control list
- utilities
ii attr 1:2.4.48-5 amd64 utilities for
manipulating filesystem extended attributes
ii fonts-quicksand 0.2016-2 all
sans-serif font with round attributes
ii krb5-config 2.6 all
Configuration files for Kerberos Version 5
ii krb5-locales 1.17-6 all
internationalization support for MIT Kerberos
ii krb5-user 1.17-6 amd64 basic
programs to authenticate using MIT Kerberos
ii libacl1:amd64 2.2.53-5 amd64 access
control list - shared library
ii libattr1:amd64 1:2.4.48-5 amd64 extended
attribute handling - shared library
ii libgssapi-krb5-2:amd64 1.17-6 amd64
MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
ii libkrb5-3:amd64 1.17-6 amd64 MIT
Kerberos runtime libraries
ii libkrb5support0:amd64 1.17-6 amd64
MIT Kerberos runtime libraries - Support library
ii libsmbclient:amd64 2:4.11.0+dfsg-10 amd64
shared library for communication with SMB/CIFS servers
ii libwbclient0:amd64 2:4.11.0+dfsg-10 amd64
Samba winbind client library
ii python-attr 18.2.0-1 all Attributes
without boilerplate (Python 2)
ii python3-pyxattr 0.6.1-1 amd64 module
for manipulating filesystem extended attributes (Python3)
ii python3-samba 2:4.11.0+dfsg-10 amd64 Python 3
bindings for Samba
ii samba 2:4.11.0+dfsg-10 amd64 SMB/CIFS file,
print, and login server for Unix
ii samba-common 2:4.11.0+dfsg-10 all common
files used by both the Samba server and client
ii samba-common-bin 2:4.11.0+dfsg-10 amd64 Samba
common files used by both the server and the client
ii samba-dsdb-modules:amd64 2:4.11.0+dfsg-10
amd64 Samba Directory Services Database
ii samba-libs:amd64 2:4.11.0+dfsg-10 amd64 Samba
core libraries
ii samba-vfs-modules:amd64 2:4.11.0+dfsg-10 amd64
Samba Virtual FileSystem plugins
ii winbind 2:4.11.0+dfsg-10 amd64 service to
resolve user and group information from Windows NT servers
-----------
--
Nathalie RAMAT-LECLERCQ
Service Informatique
Universite du Littoral-Côte d'Opale
SCoSI - Service Commun du Système d'Information
Pôle Systèmes et réseaux
Centre de Gestion Universitaire de Calais
50 rue ferdinand Buisson
C.S 80699
62228 CALAIS CEDEX
More information about the samba
mailing list