[Samba] Upgrading from Debian Stretch to Buster, Van Belle package
L.P.H. van Belle
belle at bazuin.nl
Fri Dec 20 12:58:16 UTC 2019
Ok, now that looks good again.
Now stop samba and bind and actived the bind_dlz module again in the bind config.
And start bind and samba again.
Then, you should be done.
Greetz,
Louis
> -----Oorspronkelijk bericht-----
> Van: Lmloge [mailto:lmloge at orange.fr]
> Verzonden: vrijdag 20 december 2019 13:44
> Aan: L.P.H. van Belle
> CC: samba at lists.samba.org
> Onderwerp: Re: [Samba] Upgrading from Debian Stretch to
> Buster, Van Belle package
>
> Hello Louis,
>
> -----------------------------------
> # apt-get remove libldb1 ldb-tools
> Reading package lists... Done
> Building dependency tree
> Reading state information... Done
> The following packages were automatically installed and are no longer
> required:
> libtalloc2 libtdb1 libtevent0
> Use 'apt autoremove' to remove them.
> The following packages will be REMOVED:
> ldb-tools libldb1
> 0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded.
> After this operation, 648 kB disk space will be freed.
> Do you want to continue? [Y/n] Y
> (Reading database ... 59417 files and directories currently
> installed.)
> Removing ldb-tools (2:1.5.6-0.1~stretch~1) ...
> Removing libldb1:amd64 (2:1.5.6-0.1~stretch~1) ...
> Processing triggers for man-db (2.8.5-2) ...
> Processing triggers for libc-bin (2.28-10) ...
>
> -----------------------------------
> # apt install samba winbind acl
> Reading package lists... Done
> Building dependency tree
> Reading state information... Done
> The following additional packages will be installed:
> ibverbs-providers libboost-atomic1.67.0 libboost-iostreams1.67.0
> libboost-regex1.67.0 libboost-system1.67.0 libboost-thread1.67.0
> libcephfs2 libgfapi0 libgfrpc0 libgfxdr0 libglusterfs0 libgpgme11
> libibverbs1 libldb1 libnl-3-200 libnl-route-3-200 libnspr4 libnss3
> librados2 libsmbclient libstemmer0d libtirpc-common libtirpc3
> libtracker-sparql-2.0-0 libwbclient0 python3-crypto python3-dnspython
> python3-gpg python3-iso8601 python3-ldb python3-markdown
> python3-pygments python3-samba python3-talloc python3-tdb python3-yaml
> samba-common samba-common-bin samba-dsdb-modules samba-libs
> samba-vfs-modules tdb-tools
> Suggested packages:
> python-crypto-doc python-markdown-doc python-pygments-doc
> ttf-bitstream-vera ctdb ldb-tools smbldap-tools ufw heimdal-clients
> libnss-winbind libpam-winbind
> The following NEW packages will be installed:
> acl ibverbs-providers libboost-atomic1.67.0
> libboost-iostreams1.67.0
> libboost-regex1.67.0 libboost-system1.67.0 libboost-thread1.67.0
> libcephfs2 libgfapi0 libgfrpc0 libgfxdr0 libglusterfs0 libgpgme11
> libibverbs1 libldb1 libnl-3-200 libnl-route-3-200 libnspr4 libnss3
> librados2 libsmbclient libstemmer0d libtirpc-common libtirpc3
> libtracker-sparql-2.0-0 libwbclient0 python3-crypto python3-dnspython
> python3-gpg python3-iso8601 python3-ldb python3-markdown
> python3-pygments python3-samba python3-talloc python3-tdb
> python3-yaml samba
> samba-common samba-common-bin samba-dsdb-modules samba-libs
> samba-vfs-modules tdb-tools winbind
> 0 upgraded, 45 newly installed, 0 to remove and 0 not upgraded.
> Need to get 17.5 MB/31.5 MB of archives.
> After this operation, 124 MB of additional disk space will be used.
> Do you want to continue? [Y/n]
> Get:1 http://httpredir.debian.org/debian buster/main amd64
> libtracker-sparql-2.0-0 amd64 2.1.8-2 [709 kB]
> Get:2 http://apt.van-belle.nl/debian buster-samba410/main
> amd64 libldb1
> amd64 2:1.5.6-0.1~buster~1 [139 kB]
> Get:3 http://apt.van-belle.nl/debian buster-samba410/main amd64
> libwbclient0 amd64 2:4.10.11+dfsg-0.1buster1 [134 kB]
> Get:4 http://apt.van-belle.nl/debian buster-samba410/main amd64
> python3-ldb amd64 2:1.5.6-0.1~buster~1 [42.7 kB]
> Get:5 http://apt.van-belle.nl/debian buster-samba410/main amd64
> samba-libs amd64 2:4.10.11+dfsg-0.1buster1 [5,834 kB]
> Get:6 http://httpredir.debian.org/debian buster/main amd64
> libboost-atomic1.67.0 amd64 1.67.0-13 [226 kB]
> Get:7 http://httpredir.debian.org/debian buster/main amd64
> libboost-iostreams1.67.0 amd64 1.67.0-13 [249 kB]
> Get:8 http://httpredir.debian.org/debian buster/main amd64
> libboost-regex1.67.0 amd64 1.67.0-13 [484 kB]
> Get:9 http://httpredir.debian.org/debian buster/main amd64
> libboost-system1.67.0 amd64 1.67.0-13 [229 kB]
> Get:10 http://httpredir.debian.org/debian buster/main amd64
> libboost-thread1.67.0 amd64 1.67.0-13 [267 kB]
> Get:11 http://httpredir.debian.org/debian buster/main amd64 librados2
> amd64 12.2.11+dfsg1-2.1+b1 [2,722 kB]
> Get:12 http://httpredir.debian.org/debian buster/main amd64
> libcephfs2
> amd64 12.2.11+dfsg1-2.1+b1 [434 kB]
> Get:13 http://apt.van-belle.nl/debian buster-samba410/main amd64
> libsmbclient amd64 2:4.10.11+dfsg-0.1buster1 [162 kB]
> Get:14 http://apt.van-belle.nl/debian buster-samba410/main amd64
> python3-samba amd64 2:4.10.11+dfsg-0.1buster1 [2,543 kB]
> Get:15 http://apt.van-belle.nl/debian buster-samba410/main amd64
> samba-common all 2:4.10.11+dfsg-0.1buster1 [169 kB]
> Get:16 http://apt.van-belle.nl/debian buster-samba410/main amd64
> samba-common-bin amd64 2:4.10.11+dfsg-0.1buster1 [621 kB]
> Get:17 http://apt.van-belle.nl/debian buster-samba410/main
> amd64 samba
> amd64 2:4.10.11+dfsg-0.1buster1 [1,095 kB]
> Get:18 http://apt.van-belle.nl/debian buster-samba410/main amd64
> samba-dsdb-modules amd64 2:4.10.11+dfsg-0.1buster1 [393 kB]
> Get:19 http://apt.van-belle.nl/debian buster-samba410/main amd64
> samba-vfs-modules amd64 2:4.10.11+dfsg-0.1buster1 [454 kB]
> Get:20 http://apt.van-belle.nl/debian buster-samba410/main
> amd64 winbind
> amd64 2:4.10.11+dfsg-0.1buster1 [569 kB]
> Fetched 17.5 MB in 19s (904 kB/s)
> Extracting templates from packages: 100%
> Preconfiguring packages ...
> Selecting previously unselected package libldb1:amd64.
> (Reading database ... 59379 files and directories currently
> installed.)
> Preparing to unpack
> .../00-libldb1_2%3a1.5.6-0.1~buster~1_amd64.deb ...
> Unpacking libldb1:amd64 (2:1.5.6-0.1~buster~1) ...
> Selecting previously unselected package libstemmer0d:amd64.
> Preparing to unpack .../01-libstemmer0d_0+svn585-1+b2_amd64.deb ...
> Unpacking libstemmer0d:amd64 (0+svn585-1+b2) ...
> Selecting previously unselected package libtracker-sparql-2.0-0:amd64.
> Preparing to unpack
> .../02-libtracker-sparql-2.0-0_2.1.8-2_amd64.deb ...
> Unpacking libtracker-sparql-2.0-0:amd64 (2.1.8-2) ...
> Selecting previously unselected package libwbclient0:amd64.
> Preparing to unpack
> .../03-libwbclient0_2%3a4.10.11+dfsg-0.1buster1_amd64.deb ...
> Unpacking libwbclient0:amd64 (2:4.10.11+dfsg-0.1buster1) ...
> Selecting previously unselected package python3-ldb.
> Preparing to unpack
> .../04-python3-ldb_2%3a1.5.6-0.1~buster~1_amd64.deb ...
> Unpacking python3-ldb (2:1.5.6-0.1~buster~1) ...
> Selecting previously unselected package python3-talloc.
> Preparing to unpack
> .../05-python3-talloc_2.1.16-0nmu1~deb10_amd64.deb ...
> Unpacking python3-talloc (2.1.16-0nmu1~deb10) ...
> Selecting previously unselected package samba-libs:amd64.
> Preparing to unpack
> .../06-samba-libs_2%3a4.10.11+dfsg-0.1buster1_amd64.deb ...
> Unpacking samba-libs:amd64 (2:4.10.11+dfsg-0.1buster1) ...
> Selecting previously unselected package libsmbclient:amd64.
> Preparing to unpack
> .../07-libsmbclient_2%3a4.10.11+dfsg-0.1buster1_amd64.deb ...
> Unpacking libsmbclient:amd64 (2:4.10.11+dfsg-0.1buster1) ...
> Selecting previously unselected package python3-iso8601.
> Preparing to unpack .../08-python3-iso8601_0.1.11-1_all.deb ...
> Unpacking python3-iso8601 (0.1.11-1) ...
> Selecting previously unselected package python3-dnspython.
> Preparing to unpack .../09-python3-dnspython_1.16.0-1_all.deb ...
> Unpacking python3-dnspython (1.16.0-1) ...
> Selecting previously unselected package python3-markdown.
> Preparing to unpack .../10-python3-markdown_3.0.1-3_all.deb ...
> Unpacking python3-markdown (3.0.1-3) ...
> Selecting previously unselected package python3-crypto.
> Preparing to unpack .../11-python3-crypto_2.6.1-9+b1_amd64.deb ...
> Unpacking python3-crypto (2.6.1-9+b1) ...
> Selecting previously unselected package python3-tdb.
> Preparing to unpack
> .../12-python3-tdb_1.3.18-0.1nmu0~deb10_amd64.deb ...
> Unpacking python3-tdb (1.3.18-0.1nmu0~deb10) ...
> Selecting previously unselected package python3-samba.
> Preparing to unpack
> .../13-python3-samba_2%3a4.10.11+dfsg-0.1buster1_amd64.deb ...
> Unpacking python3-samba (2:4.10.11+dfsg-0.1buster1) ...
> Selecting previously unselected package samba-common.
> Preparing to unpack
> .../14-samba-common_2%3a4.10.11+dfsg-0.1buster1_all.deb ...
> Unpacking samba-common (2:4.10.11+dfsg-0.1buster1) ...
> Selecting previously unselected package samba-common-bin.
> Preparing to unpack
> .../15-samba-common-bin_2%3a4.10.11+dfsg-0.1buster1_amd64.deb ...
> Unpacking samba-common-bin (2:4.10.11+dfsg-0.1buster1) ...
> Selecting previously unselected package tdb-tools.
> Preparing to unpack
> .../16-tdb-tools_1.3.18-0.1nmu0~deb10_amd64.deb ...
> Unpacking tdb-tools (1.3.18-0.1nmu0~deb10) ...
> Selecting previously unselected package samba.
> Preparing to unpack
> .../17-samba_2%3a4.10.11+dfsg-0.1buster1_amd64.deb ...
> Unpacking samba (2:4.10.11+dfsg-0.1buster1) ...
> Selecting previously unselected package acl.
> Preparing to unpack .../18-acl_2.2.53-4_amd64.deb ...
> Unpacking acl (2.2.53-4) ...
> Selecting previously unselected package libnl-3-200:amd64.
> Preparing to unpack .../19-libnl-3-200_3.4.0-1_amd64.deb ...
> Unpacking libnl-3-200:amd64 (3.4.0-1) ...
> Selecting previously unselected package libnl-route-3-200:amd64.
> Preparing to unpack .../20-libnl-route-3-200_3.4.0-1_amd64.deb ...
> Unpacking libnl-route-3-200:amd64 (3.4.0-1) ...
> Selecting previously unselected package libibverbs1:amd64.
> Preparing to unpack .../21-libibverbs1_22.1-1_amd64.deb ...
> Unpacking libibverbs1:amd64 (22.1-1) ...
> Selecting previously unselected package ibverbs-providers:amd64.
> Preparing to unpack .../22-ibverbs-providers_22.1-1_amd64.deb ...
> Unpacking ibverbs-providers:amd64 (22.1-1) ...
> Selecting previously unselected package libboost-atomic1.67.0:amd64.
> Preparing to unpack
> .../23-libboost-atomic1.67.0_1.67.0-13_amd64.deb ...
> Unpacking libboost-atomic1.67.0:amd64 (1.67.0-13) ...
> Selecting previously unselected package
> libboost-iostreams1.67.0:amd64.
> Preparing to unpack
> .../24-libboost-iostreams1.67.0_1.67.0-13_amd64.deb ...
> Unpacking libboost-iostreams1.67.0:amd64 (1.67.0-13) ...
> Selecting previously unselected package libboost-regex1.67.0:amd64.
> Preparing to unpack
> .../25-libboost-regex1.67.0_1.67.0-13_amd64.deb ...
> Unpacking libboost-regex1.67.0:amd64 (1.67.0-13) ...
> Selecting previously unselected package libboost-system1.67.0:amd64.
> Preparing to unpack
> .../26-libboost-system1.67.0_1.67.0-13_amd64.deb ...
> Unpacking libboost-system1.67.0:amd64 (1.67.0-13) ...
> Selecting previously unselected package libboost-thread1.67.0:amd64.
> Preparing to unpack
> .../27-libboost-thread1.67.0_1.67.0-13_amd64.deb ...
> Unpacking libboost-thread1.67.0:amd64 (1.67.0-13) ...
> Selecting previously unselected package libnspr4:amd64.
> Preparing to unpack .../28-libnspr4_2%3a4.20-1_amd64.deb ...
> Unpacking libnspr4:amd64 (2:4.20-1) ...
> Selecting previously unselected package libnss3:amd64.
> Preparing to unpack .../29-libnss3_2%3a3.42.1-1+deb10u2_amd64.deb ...
> Unpacking libnss3:amd64 (2:3.42.1-1+deb10u2) ...
> Selecting previously unselected package librados2:amd64.
> Preparing to unpack
> .../30-librados2_12.2.11+dfsg1-2.1+b1_amd64.deb ...
> Unpacking librados2:amd64 (12.2.11+dfsg1-2.1+b1) ...
> Selecting previously unselected package libcephfs2:amd64.
> Preparing to unpack
> .../31-libcephfs2_12.2.11+dfsg1-2.1+b1_amd64.deb ...
> Unpacking libcephfs2:amd64 (12.2.11+dfsg1-2.1+b1) ...
> Selecting previously unselected package libtirpc-common.
> Preparing to unpack .../32-libtirpc-common_1.1.4-0.4_all.deb ...
> Unpacking libtirpc-common (1.1.4-0.4) ...
> Selecting previously unselected package libtirpc3:amd64.
> Preparing to unpack .../33-libtirpc3_1.1.4-0.4_amd64.deb ...
> Unpacking libtirpc3:amd64 (1.1.4-0.4) ...
> Selecting previously unselected package libglusterfs0:amd64.
> Preparing to unpack .../34-libglusterfs0_5.5-3_amd64.deb ...
> Unpacking libglusterfs0:amd64 (5.5-3) ...
> Selecting previously unselected package libgfxdr0:amd64.
> Preparing to unpack .../35-libgfxdr0_5.5-3_amd64.deb ...
> Unpacking libgfxdr0:amd64 (5.5-3) ...
> Selecting previously unselected package libgfrpc0:amd64.
> Preparing to unpack .../36-libgfrpc0_5.5-3_amd64.deb ...
> Unpacking libgfrpc0:amd64 (5.5-3) ...
> Selecting previously unselected package libgfapi0:amd64.
> Preparing to unpack .../37-libgfapi0_5.5-3_amd64.deb ...
> Unpacking libgfapi0:amd64 (5.5-3) ...
> Selecting previously unselected package libgpgme11:amd64.
> Preparing to unpack .../38-libgpgme11_1.12.0-6_amd64.deb ...
> Unpacking libgpgme11:amd64 (1.12.0-6) ...
> Selecting previously unselected package python3-gpg.
> Preparing to unpack .../39-python3-gpg_1.12.0-6_amd64.deb ...
> Unpacking python3-gpg (1.12.0-6) ...
> Selecting previously unselected package python3-pygments.
> Preparing to unpack .../40-python3-pygments_2.3.1+dfsg-1_all.deb ...
> Unpacking python3-pygments (2.3.1+dfsg-1) ...
> Selecting previously unselected package python3-yaml.
> Preparing to unpack .../41-python3-yaml_3.13-2_amd64.deb ...
> Unpacking python3-yaml (3.13-2) ...
> Selecting previously unselected package samba-dsdb-modules:amd64.
> Preparing to unpack
> .../42-samba-dsdb-modules_2%3a4.10.11+dfsg-0.1buster1_amd64.deb ...
> Unpacking samba-dsdb-modules:amd64 (2:4.10.11+dfsg-0.1buster1) ...
> Selecting previously unselected package samba-vfs-modules:amd64.
> Preparing to unpack
> .../43-samba-vfs-modules_2%3a4.10.11+dfsg-0.1buster1_amd64.deb ...
> Unpacking samba-vfs-modules:amd64 (2:4.10.11+dfsg-0.1buster1) ...
> Selecting previously unselected package winbind.
> Preparing to unpack
> .../44-winbind_2%3a4.10.11+dfsg-0.1buster1_amd64.deb ...
> Unpacking winbind (2:4.10.11+dfsg-0.1buster1) ...
> Setting up libboost-regex1.67.0:amd64 (1.67.0-13) ...
> Setting up libldb1:amd64 (2:1.5.6-0.1~buster~1) ...
> Setting up python3-talloc (2.1.16-0nmu1~deb10) ...
> Setting up libtirpc-common (1.1.4-0.4) ...
> Setting up python3-yaml (3.13-2) ...
> Setting up samba-common (2:4.10.11+dfsg-0.1buster1) ...
> Setting up libgpgme11:amd64 (1.12.0-6) ...
> Setting up libwbclient0:amd64 (2:4.10.11+dfsg-0.1buster1) ...
> Setting up acl (2.2.53-4) ...
> Setting up python3-tdb (1.3.18-0.1nmu0~deb10) ...
> Setting up python3-pygments (2.3.1+dfsg-1) ...
> Setting up python3-iso8601 (0.1.11-1) ...
> Setting up python3-gpg (1.12.0-6) ...
> Setting up libnspr4:amd64 (2:4.20-1) ...
> Setting up tdb-tools (1.3.18-0.1nmu0~deb10) ...
> update-alternatives: using /usr/bin/tdbbackup.tdbtools to provide
> /usr/bin/tdbbackup (tdbbackup) in auto mode
> Setting up python3-ldb (2:1.5.6-0.1~buster~1) ...
> Setting up python3-markdown (3.0.1-3) ...
> Setting up libboost-iostreams1.67.0:amd64 (1.67.0-13) ...
> Setting up python3-dnspython (1.16.0-1) ...
> Setting up libnl-3-200:amd64 (3.4.0-1) ...
> Setting up python3-crypto (2.6.1-9+b1) ...
> Setting up libboost-atomic1.67.0:amd64 (1.67.0-13) ...
> Setting up libstemmer0d:amd64 (0+svn585-1+b2) ...
> Setting up libboost-system1.67.0:amd64 (1.67.0-13) ...
> Setting up libtirpc3:amd64 (1.1.4-0.4) ...
> Setting up libboost-thread1.67.0:amd64 (1.67.0-13) ...
> Setting up libnss3:amd64 (2:3.42.1-1+deb10u2) ...
> Setting up libnl-route-3-200:amd64 (3.4.0-1) ...
> Setting up libglusterfs0:amd64 (5.5-3) ...
> Setting up libtracker-sparql-2.0-0:amd64 (2.1.8-2) ...
> Setting up libgfxdr0:amd64 (5.5-3) ...
> Setting up libibverbs1:amd64 (22.1-1) ...
> Setting up librados2:amd64 (12.2.11+dfsg1-2.1+b1) ...
> Setting up ibverbs-providers:amd64 (22.1-1) ...
> Setting up samba-libs:amd64 (2:4.10.11+dfsg-0.1buster1) ...
> Setting up libcephfs2:amd64 (12.2.11+dfsg1-2.1+b1) ...
> Setting up libsmbclient:amd64 (2:4.10.11+dfsg-0.1buster1) ...
> Setting up samba-dsdb-modules:amd64 (2:4.10.11+dfsg-0.1buster1) ...
> Setting up libgfrpc0:amd64 (5.5-3) ...
> Setting up python3-samba (2:4.10.11+dfsg-0.1buster1) ...
> Setting up samba-vfs-modules:amd64 (2:4.10.11+dfsg-0.1buster1) ...
> Setting up libgfapi0:amd64 (5.5-3) ...
> Setting up samba-common-bin (2:4.10.11+dfsg-0.1buster1) ...
> Checking smb.conf with testparm
> Load smb config files from /etc/samba/smb.conf
> Loaded services file OK.
> Server role: ROLE_ACTIVE_DIRECTORY_DC
>
> Done
> Checking smb.conf with samba-tool
> INFO 2019-12-20 13:36:23,272 pid:2415
> /usr/lib/python3/dist-packages/samba/netcmd/testparm.py #96:
> Loaded smb
> config files from /etc/samba/smb.conf
> INFO 2019-12-20 13:36:23,272 pid:2415
> /usr/lib/python3/dist-packages/samba/netcmd/testparm.py #97: Loaded
> services file OK.
> Done
> Setting up samba (2:4.10.11+dfsg-0.1buster1) ...
> Samba is being run as an AD Domain Controller: Masking smbd.service
> nmbd.service
> Please ignore the following error about deb-systemd-helper
> not finding
> those services.
> (smbd.service already masked)
> (nmbd.service already masked)
> Setting up winbind (2:4.10.11+dfsg-0.1buster1) ...
> Samba is being run as an AD Domain Controller: Masking winbind.service
> Please ignore the following error about deb-systemd-helper
> not finding
> those services.
> (winbind.service already masked)
> Processing triggers for man-db (2.8.5-2) ...
> Processing triggers for libc-bin (2.28-10) ...
> Processing triggers for systemd (241-7~deb10u2) ...
>
>
> -----------------------------------
> # dpkg -l | egrep "samba|winbind|libwb|ldb|tdb|tevent|talloc"
> ii libldb1:amd64 2:1.5.6-0.1~buster~1 amd64 LDAP-like
> embedded database - shared library
> ii libtalloc2:amd64 2.1.16-0nmu1~deb10 amd64
> hierarchical pool based memory allocator
> ii libtdb1:amd64 1.3.18-0.1nmu0~deb10 amd64 Trivial
> Database - shared library
> ii libtevent0:amd64 0.9.39-0.1nmu1~deb10 amd64
> talloc-based event loop library - shared library
> ii libwbclient0:amd64 2:4.10.11+dfsg-0.1buster1 amd64
> Samba
> winbind client library
> ii python3-ldb 2:1.5.6-0.1~buster~1 amd64 Python 3
> bindings for LDB
> ii python3-samba 2:4.10.11+dfsg-0.1buster1 amd64 Python 3
> bindings for Samba
> ii python3-talloc 2.1.16-0nmu1~deb10 amd64
> hierarchical pool based memory allocator - Python3 bindings
> ii python3-tdb 1.3.18-0.1nmu0~deb10 amd64 Python3
> bindings for TDB
> ii samba 2:4.10.11+dfsg-0.1buster1 amd64 SMB/CIFS file,
> print, and login server for Unix
> ii samba-common 2:4.10.11+dfsg-0.1buster1 all
> common files
> used by both the Samba server and client
> ii samba-common-bin 2:4.10.11+dfsg-0.1buster1 amd64 Samba
> common files used by both the server and the client
> ii samba-dsdb-modules:amd64 2:4.10.11+dfsg-0.1buster1
> amd64
> Samba Directory Services Database
> ii samba-libs:amd64 2:4.10.11+dfsg-0.1buster1 amd64 Samba
> core libraries
> ii samba-vfs-modules:amd64 2:4.10.11+dfsg-0.1buster1 amd64
> Samba Virtual FileSystem plugins
> ii tdb-tools 1.3.18-0.1nmu0~deb10 amd64
> Trivial Database
> - bundled binaries
> ii winbind 2:4.10.11+dfsg-0.1buster1 amd64 service
> to resolve
> user and group information from Windows NT servers
>
>
> -----------------------------------
> # ps aux | egrep "samba|nmbd|smbd|winbind"
> root 3296 0.0 0.0 6208 888 pts/0 S+ 13:39
> 0:00 grep -E
> samba|nmbd|smbd|winbind
>
>
> -----------------------------------
> # ps aux | egrep "bind|named"
> bind 1368 0.0 0.3 386352 28120 ? Ssl 11:32 0:01
> /usr/sbin/named -u bind -4
> root 3298 0.0 0.0 6208 892 pts/0 S+ 13:39
> 0:00 grep -E
> bind|named
>
>
> -----------------------------------
> # smbstatus --version
> Version 4.10.11-Debian
>
>
> Best regards,
> --
> Léa
>
>
More information about the samba
mailing list