[Samba] Hosted printer drivers can not be used

Tue Dec 17 13:53:23 UTC 2019

Hai, 

Nope, this is a bug.. You did it all right. 
Im running the (about) same setup, but printerdriver uploading fails in a lot of places. 
But im not sure where exactly. 

I suggest, report it also in bugzilla.samba.org 

Greetz, 

Louis

> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens 
> Christian Haase via samba
> Verzonden: dinsdag 17 december 2019 14:15
> Aan: samba at lists.samba.org
> Onderwerp: [Samba] Hosted printer drivers can not be used
> 
> Hi,
> 
> I have problems setting up the printer drivers using samba. I use a
> fresh setup of Samba Version 4.11.4-SerNet-Debian-6.buster 
> and followed
> 
>  * 
> https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Domain_Member
>  * https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Print_Server
>  * 
> .../Setting_up_Automatic_Printer_Driver_Downloads_for_Windows_Clients
> 
> Cups is the default debian setup with only one printer added via lpd.
> The printer model is KONICA MINOLTA C364e and the driver is KONICA
> MINOLTA C364SeriesPCL version 5.3.0.500; Type 3 - User mode.
> 
> At the end of Setting_up_Samba_as_a_Print_Server I was able to install
> the printer on a Win 10 client using double click and manual driver
> selection and print a test page.
> 
> After the step "Assigning a Driver to a Printer" on
> Setting_up_Automatic_Printer_Driver_Downloads_for_Windows_Clie
> nts (Tried
> both print management and rpcclient) I got the following situation.
> 
> (All messages translated from german)
> 
> When opening the printer properties from print management I 
> get the popup
> 
> [Window Title]
> Printer Properties
> 
> [Main Instruction]
> The "KONICA MINOLTA C364SeriesPCL" printer driver is not installed on
> this computer. Some printer properties will not be accessible 
> unless you
> install the printer driver. Do you want to install the driver now?
> 
> [Yes] [No]
> 
> When pressing yes, the Add Printer Driver Wizard opens. I follow the
> wizard to install exactly the same driver like the one I added to
> print$. Then the properties open, but without the driver 
> additions. When
> I reopen the properties, the popup appears again.
> 
> When trying to print the windows test page, this message pops up:
> 
> [Window Title]
> Printer Properties
> 
> [Main Instruction]
> Test page failed to print. Would you like to view the print
> troubleshooter for assistance?
> 
> The procedure number is out of range.
> 
> [Yes] [No]
> 
> In the clients event log, this entry is logged:
> Windows could not load print processor KOAYTJ_P because EnumDatatypes
> failed. Error code 126. Module:
> C:\WINDOWS\system32\spool\PRTPROCS\x64\KOAYTJ_P.DLL. Please obtain and
> install a new version of the driver from the manufacturer (if
> available), or choose an alternate driver that works with 
> this print device
> 
> I noticed, that on my Windows 2008 R2 reference system, in the printer
> management drivers list, the drivers print processor is set 
> to KOAYTJ_P,
> on samba it is winprint. Not sure if related, the fax driver for the
> printer uses winprint on the reference system and has the 
> same behaviour
> on samba.
> 
> Is there anything I am missing?
> 
> Thanks in advance,
> Christian
> 
> # find /srv/samba/printers
> /srv/samba/printers
> /srv/samba/printers/x64
> /srv/samba/printers/x64/3
> /srv/samba/printers/x64/3/KOAYTJ_J.DLL
> /srv/samba/printers/x64/3/KOAYTJ_W.DLL
> /srv/samba/printers/x64/3/KOAYTJ__.KPD
> /srv/samba/printers/x64/3/KOAYTJ__.mg
> /srv/samba/printers/x64/3/KOAYTJ_F.DLL
> /srv/samba/printers/x64/3/KOAYTJ_C.KMP
> /srv/samba/printers/x64/3/KOAYTJ_J.ini
> /srv/samba/printers/x64/3/KOAYTJ_A.KMP
> /srv/samba/printers/x64/3/KOAYTJ__.yg
> /srv/samba/printers/x64/3/KOAYTJ__.md
> /srv/samba/printers/x64/3/KOAYTJ_B.DLL
> /srv/samba/printers/x64/3/KOAYTJ__.kg
> /srv/samba/printers/x64/3/KOAYTJ_C.DLL
> /srv/samba/printers/x64/3/KOAYTJ__.kd
> /srv/samba/printers/x64/3/KOAYTJ_Y.DLL
> /srv/samba/printers/x64/3/KOAYTJ_O.DLL
> /srv/samba/printers/x64/3/KOAYTJ_G.KMP
> /srv/samba/printers/x64/3/KOAYTJ_N.DLL
> /srv/samba/printers/x64/3/KOAYTJ_U.DLL
> /srv/samba/printers/x64/3/KOAYTJ_F.KMP
> /srv/samba/printers/x64/3/KOAYTJ_M.KPD
> /srv/samba/printers/x64/3/KOAYTJ__.cd
> /srv/samba/printers/x64/3/KOAYTJ_E.KMP
> /srv/samba/printers/x64/3/KOAYTJ__.yd
> /srv/samba/printers/x64/3/KOBDrvAPIW64.exe
> /srv/samba/printers/x64/3/KOAYTJ_B.KMP
> /srv/samba/printers/x64/3/KOAYTJ_S.DLL
> /srv/samba/printers/x64/3/KOAYTJ_G.DLL
> /srv/samba/printers/x64/3/KOAYTJ_T.dll
> /srv/samba/printers/x64/3/KOAYTJ__.cg
> /srv/samba/printers/x64/3/KOAYTJ_D.KPD
> /srv/samba/printers/x64/3/KOAYTJ_D.KMP
> /srv/samba/printers/x64/3/KOAYTJ_M.DLL
> /srv/samba/printers/x64/3/KOAYTJ_W.EXE
> /srv/samba/printers/x64/3/KOAYTJ__.yud
> /srv/samba/printers/x64/3/KOAYTJ__.kud
> /srv/samba/printers/x64/3/KOBDrvAPIIF.dll
> /srv/samba/printers/x64/3/KOAYTJ__.mud
> /srv/samba/printers/x64/3/KOAYTJ_D.DLL
> /srv/samba/printers/x64/3/KOAYTJ_Q.DLL
> /srv/samba/printers/x64/3/KOAYTJ_P.DLL
> /srv/samba/printers/x64/3/KOAYTJ_R.DLL
> /srv/samba/printers/x64/3/KOAYTJ_X.DLL
> /srv/samba/printers/x64/3/KOAYTJ_K.DLL
> /srv/samba/printers/x64/3/KOAYTJ__.CHM
> /srv/samba/printers/x64/3/KOAYTJ__.cud
> /srv/samba/printers/x64/3/KOAYTJ_F.fl
> /srv/samba/printers/x64/3/KOBDrvAPIIF32.dll
> /srv/samba/printers/x64/3/KOAYTJ_E.DLL
> /srv/samba/printers/x64/3/KOAYTJ_C.KPD
> /srv/samba/printers/x64/3/KOAYTJ__.UNF
> 
> smb.conf:
> [global]
> 	security = ADS
> 	realm = SAMDOM.EXAMPLE.COM (redacted)
> 	workgroup = SAMDOM (redacted)
> 
> 	idmap config * : backend = tdb
> 	idmap config * : range = 3000-7999
> 
> 	winbind refresh tickets = Yes
> 	vfs objects = acl_xattr
> 	map acl inherit = Yes
> 	store dos attributes = Yes
> 	acl_xattr: default acl style = windows
> 
> 	winbind use default domain = yes
> 
> 	winbind enum users = yes
> 	winbind enum groups = yes
> 
> 	username map = /etc/samba/user.map
> 
> 	log file = /var/log/samba/log.%m
> 	log level = 6
> 	
> 	rpc_server:spoolss = external
> 	rpc_daemon:spoolssd = fork
> 	spoolss: architecture = Windows x64
> 
> 	printing = CUPS
> 	printcap name = cups
> 	load printers = yes
> 	#enumports command = /etc/samba/printerports.sh
> 	cups options = "raw media=a4"
> 
> [printers]
> 	comment = All Printers
> 	path = /var/spool/samba
> 	printable = yes
> 	read only = no
> 	acl_xattr:ignore system acl = yes
> 
> [print$]
> 	comment = Printer Drivers
> 	path = /srv/samba/printers
> 	read only = no
> 	acl_xattr:ignore system acl = yes
> 
> -- 
> ifu Hamburg - Member of iPoint Group
> "Productivity meets Sustainability"
> 
> ifu Institut für Umweltinformatik Hamburg GmbH
> Max-Brauer-Allee 50 - 22765 Hamburg - Germany
> fon: +49 40 480009-0 - fax: +49 40 480009-22 - email: info at ifu.com
> 
> Managing Director: Jan Hedemann - Commercial Register: 
> Hamburg, HRB 52629
> www.ifu.com - www.umberto.de - www.e-sankey.com
> 
> In der Zeit vom 23.12.2019 bis einschließlich 03.01.2020 bleibt das
> ifu Hamburg geschlossen. Ein Notdienst ist eingerichtet.
> Alle Mitarbeiter des ifu wünschen Ihnen eine frohe Weihnachtszeit!
> 
> In the period from 23rd of December 2019 until the 3rd of January 2020
> ifu Hamburg will remain closed. An emergency service has been set up.
> All ifu employees wish you a merry christmas time!
> 
> -- 
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
> 
> 