[Samba] Failing to join existing AD as DC

[Roy Eastwood]

I note from an earlier post that the OP has the new DC on IP address 10.0.1.250/24.  The Windows DC is on 10.88.80.88 which is not on the same subnet, so presumably he has appropriate routes set to connect to the Windows DC?

Just my 2d.

HTH

Roy

> -----Original Message-----
> From: samba [mailto:samba-bounces at lists.samba.org] On Behalf Of L.P.H.
> van Belle via samba
> Sent: 16 August 2019 09:53
> To: samba at lists.samba.org
> Subject: Re: [Samba] Failing to join existing AD as DC
> 
> Hai,
> 
> If updated the script a bit, can you run it again?
> 
> wget https://raw.githubusercontent.com/thctlo/samba4/master/samba-
> collect-debug-info.sh
> 
> 
> Greetz,
> 
> Louis
> 
> 
> > -----Oorspronkelijk bericht-----
> > Van: samba [mailto:samba-bounces at lists.samba.org] Namens
> > Alexander Harm via samba
> > Verzonden: vrijdag 16 augustus 2019 9:14
> > Aan: samba at lists.samba.org
> > Onderwerp: Re: [Samba] Failing to join existing AD as DC
> >
> > Still the same error.
> >
> > I wiped the machine afterwards, re-installed everything from
> > scratch. But again, join fails.
> >
> >
> >
> >
> > On 15. August 2019 at 18:57:40, Rowland penny via samba
> > (samba at lists.samba.org) wrote:
> >
> > On 15/08/2019 17:42, Alexander Harm via samba wrote:
> > > Here you go:
> > >
> > > Collected config  --- 2019-08-15-18:38 -----------
> > >
> > > Hostname: ka-h9-dc01
> > > DNS Domain: samdom.example.com
> > > FQDN: ka-h9-dc01.samdom.example.com
> > > ipaddress: 10.0.1.250
> > >
> > > -----------
> > >        Checking file: /etc/hosts
> > >
> > > 127.0.0.1	localhost
> > > 127.0.1.1	ka-h9-dc01.samdom.example.com
> > ka-h9-dc01.example.com ka-h9-dc01
> > Remove the '127.0.1.1' line.
> > > 10.0.1.250	ka-h9-dc01.samdom.example.com
> > ka-h9-dc01.example.com ka-h9-dc01
> >
> > Change the '10.0.1.250' line to
> >
> > 10.0.1.250 ka-h9-dc01.samdom.example.com ka-h9-dc01
> >
> > >
> > > # The following lines are desirable for IPv6 capable hosts
> > > ::1     localhost ip6-localhost ip6-loopback
> > > ff02::1 ip6-allnodes
> > > ff02::2 ip6-allrouters
> > >
> > > -----------
> > >
> > >        Checking file: /etc/resolv.conf
> > >
> > > domain samdom.example.com
> > > search samdom.example.com
> > > nameserver 10.88.80.88
> > You don't really need the 'domain' line and I take it that
> > '10.88.80.88'
> > is the IP of the existing AD DC
> >
> > Fix the above & remove the smb.conf and then try again.
> >
> > Rowland
> >
> >
> >
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions: https://lists.samba.org/mailman/options/samba
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions:  https://lists.samba.org/mailman/options/samba
> >
> >
> 
> 
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba