[Samba] Kyocera P6230cdn driver installation on print server fails

Matthias m612 at mbsks.franken.de
Tue Sep 18 08:32:15 UTC 2018


Louis,

I installed your 4.8.5 on the print server (and only there). I tried
installing original KX XPS driver and your customized driver and got
the same error. You did not write for which version of samba your
patch is. Does it still make sense to try it on the 4.8.5?

Thanks
Matthias

On Mon, Sep 17, 2018 at 02:00:03PM +0200, L.P.H. van Belle via samba wrote:
> As you did see on the download location. 
> 
> http://downloads.van-belle.nl/samba4/Patches/debian-S12761-s3-printing-Change-to-GUID-dir-if-we-deal-with-COPY.patch 
> Is a working fix. I've used that in lots of samba versions. 
> 
> But i dont need the patch anymore, so i removed it from the builds. 
> 
> You can try : 
> https://downloads.van-belle.nl/samba4/Kyocera/ 
> Which is a customized driver made for me by kyocera and signed by MS. 
> 
> The next samba 4.6 ... 
> See : https://wiki.samba.org/index.php/Samba_Release_Planning 
> 4.6 discontinued (EOL) 2018-09-13  
> 
> Upgrade to 4.7 or better 4.8. 
> 
> Please note, if you adjust you driver as shown below, you loose the signing and you need to lift some restrictions by GPO to allow the printer driver. 
> 
> 
> Latest samba version should allow the new MS drivers, but i have not tested that. 
> The universal kyocera works fine for now. 
> 
> Greetz, 
> 
> Louis
> 
> 
> > -----Oorspronkelijk bericht-----
> > Van: samba [mailto:samba-bounces at lists.samba.org] Namens 
> > MORILLO Jordi via samba
> > Verzonden: maandag 17 september 2018 13:36
> > Aan: samba at lists.samba.org
> > Onderwerp: Re: [Samba] Kyocera P6230cdn driver installation 
> > on print server fails
> > 
> > As usual, Kyocera drivers are not all formed.
> > You have to edit OEMSETUP.inf in each arch (32 + 64):
> > 
> > Modify this:
> > 
> > [Manufacturer]
> > Kyocera=Kyocera,NTx86.6.0,NTamd64.6.0
> > ;----------------------------------------------------------------
> > ; Model Sections
> > ;----------------------------------------------------------------
> > [Kyocera.NTx86.6.0]
> > .....
> > [Kyocera.NTamd64.6.0]
> > .....
> > 
> > Into this:
> > 
> > [Manufacturer]
> > Kyocera=Kyocera,NTx86,NTamd64
> > ;----------------------------------------------------------------
> > ; Model Sections
> > ;----------------------------------------------------------------
> > [Kyocera.NTx86]
> > .....
> > [Kyocera.NTamd64]
> > .....
> > 
> > Also, there is a bug that never been corrected for uploading 
> > 32bits driver: 
> > https://bugzilla.samba.org/show_bug.cgi?id=12761 but patch exist....
> > 
> > 
> > -----Message d'origine-----
> > De : samba <samba-bounces at lists.samba.org> De la part de 
> > Matthias via samba
> > Envoyé : lundi 17 septembre 2018 12:38
> > À : samba at lists.samba.org
> > Objet : [Samba] Kyocera P6230cdn driver installation on print 
> > server fails
> > 
> > Hello,
> > 
> > I am trying to install the driver on my print server. I used
> > 
> > https://wiki.samba.org/index.php/Setting_up_Automatic_Printer_
> > Driver_Downloads_for_Windows_Clients
> > 
> > as a guide. I tried to install
> > 
> > - KX driver, 32 and/or 64 bit
> > - KX-XPS driver, 32 and/or 64 bit
> > - Of both drivers the 64bit variants the installed driver 
> > package from system32 directory
> > 
> > With all drivers I get the message
> > 
> > "Add Printer Driver Wizard
> > Unable to install Kyocera ECOSYS P6230cdn KX (XPS), Type 3 - 
> > User Mode, x64 driver.
> > This operation is not supported."
> > 
> > after files have been copied to the print$ share into 
> > x64/{...} or W32X86/{...} directories. I can't find anything 
> > enlightening in the samba log files (low log level shows 
> > nothing helpful, high log level shows to much) and eventvwr 
> > (AFAIR Event ID 215 which brings nothing helpful). I have set 
> > os_major/minor to 6/0. I don't believe, that rights are missing.
> > 
> > Any ideas?
> > 
> > Thanks
> > Matthias
> > 
> > 
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions:  https://lists.samba.org/mailman/options/samba
> > -- 
> > To unsubscribe from this list go to the following URL and read the
> > instructions:  https://lists.samba.org/mailman/options/samba
> > 
> > 
> 
> 
> -- 
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba

-- 
greg requiescat in pace. vir magnus erat. desiderio eius angor.



More information about the samba mailing list