[Samba] Kyocera P6230cdn driver installation on print server fails
L.P.H. van Belle
belle at bazuin.nl
Mon Sep 17 12:00:03 UTC 2018
As you did see on the download location.
http://downloads.van-belle.nl/samba4/Patches/debian-S12761-s3-printing-Change-to-GUID-dir-if-we-deal-with-COPY.patch
Is a working fix. I've used that in lots of samba versions.
But i dont need the patch anymore, so i removed it from the builds.
You can try :
https://downloads.van-belle.nl/samba4/Kyocera/
Which is a customized driver made for me by kyocera and signed by MS.
The next samba 4.6 ...
See : https://wiki.samba.org/index.php/Samba_Release_Planning
4.6 discontinued (EOL) 2018-09-13
Upgrade to 4.7 or better 4.8.
Please note, if you adjust you driver as shown below, you loose the signing and you need to lift some restrictions by GPO to allow the printer driver.
Latest samba version should allow the new MS drivers, but i have not tested that.
The universal kyocera works fine for now.
Greetz,
Louis
> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens
> MORILLO Jordi via samba
> Verzonden: maandag 17 september 2018 13:36
> Aan: samba at lists.samba.org
> Onderwerp: Re: [Samba] Kyocera P6230cdn driver installation
> on print server fails
>
> As usual, Kyocera drivers are not all formed.
> You have to edit OEMSETUP.inf in each arch (32 + 64):
>
> Modify this:
>
> [Manufacturer]
> Kyocera=Kyocera,NTx86.6.0,NTamd64.6.0
> ;----------------------------------------------------------------
> ; Model Sections
> ;----------------------------------------------------------------
> [Kyocera.NTx86.6.0]
> .....
> [Kyocera.NTamd64.6.0]
> .....
>
> Into this:
>
> [Manufacturer]
> Kyocera=Kyocera,NTx86,NTamd64
> ;----------------------------------------------------------------
> ; Model Sections
> ;----------------------------------------------------------------
> [Kyocera.NTx86]
> .....
> [Kyocera.NTamd64]
> .....
>
> Also, there is a bug that never been corrected for uploading
> 32bits driver:
> https://bugzilla.samba.org/show_bug.cgi?id=12761 but patch exist....
>
>
> -----Message d'origine-----
> De : samba <samba-bounces at lists.samba.org> De la part de
> Matthias via samba
> Envoyé : lundi 17 septembre 2018 12:38
> À : samba at lists.samba.org
> Objet : [Samba] Kyocera P6230cdn driver installation on print
> server fails
>
> Hello,
>
> I am trying to install the driver on my print server. I used
>
> https://wiki.samba.org/index.php/Setting_up_Automatic_Printer_
> Driver_Downloads_for_Windows_Clients
>
> as a guide. I tried to install
>
> - KX driver, 32 and/or 64 bit
> - KX-XPS driver, 32 and/or 64 bit
> - Of both drivers the 64bit variants the installed driver
> package from system32 directory
>
> With all drivers I get the message
>
> "Add Printer Driver Wizard
> Unable to install Kyocera ECOSYS P6230cdn KX (XPS), Type 3 -
> User Mode, x64 driver.
> This operation is not supported."
>
> after files have been copied to the print$ share into
> x64/{...} or W32X86/{...} directories. I can't find anything
> enlightening in the samba log files (low log level shows
> nothing helpful, high log level shows to much) and eventvwr
> (AFAIR Event ID 215 which brings nothing helpful). I have set
> os_major/minor to 6/0. I don't believe, that rights are missing.
>
> Any ideas?
>
> Thanks
> Matthias
>
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: https://lists.samba.org/mailman/options/samba
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: https://lists.samba.org/mailman/options/samba
>
>
More information about the samba
mailing list