[Samba] Cannot scan to network share from Canon
Matthew Broadhead
matthew.broadhead at nbmlaw.co.uk
Thu Dec 6 11:38:31 UTC 2018
scans is the share that the printer cannot reach
# This is the main Samba configuration file. For detailed information
about the
# options listed here, refer to the smb.conf(5) manual page. Samba has a
huge
# number of configurable options, most of which are not shown in this
example.
#
# The Official Samba 3.2.x HOWTO and Reference Guide contains step-by-step
# guides for installing, configuring, and using Samba:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
#
# The Samba-3 by Example guide has working examples for smb.conf. This
guide is
# generated daily: http://www.samba.org/samba/docs/Samba-Guide.pdf
#
# In this file, lines starting with a semicolon (;) or a hash (#) are
# comments and are ignored. This file uses hashes to denote commentary and
# semicolons for parts of the file you may wish to configure.
#
# Note: Run the "testparm" command after modifying this file to check
for basic
# syntax errors.
#
#---------------
# Security-Enhanced Linux (SELinux) Notes:
#
# Turn the samba_domain_controller Boolean on to allow Samba to use the
useradd
# and groupadd family of binaries. Run the following command as the root
user to
# turn this Boolean on:
# setsebool -P samba_domain_controller on
#
# Turn the samba_enable_home_dirs Boolean on if you want to share home
# directories via Samba. Run the following command as the root user to
turn this
# Boolean on:
# setsebool -P samba_enable_home_dirs on
#
# If you create a new directory, such as a new top-level directory, label it
# with samba_share_t so that SELinux allows Samba to read and write to
it. Do
# not label system directories, such as /etc/ and /home/, with
samba_share_t, as
# such directories should already have an SELinux label.
#
# Run the "ls -ldZ /path/to/directory" command to view the current SELinux
# label for a given directory.
#
# Set SELinux labels only on files and directories you have created. Use the
# chcon command to temporarily change a label:
# chcon -t samba_share_t /path/to/directory
#
# Changes made via chcon are lost when the file system is relabeled or
commands
# such as restorecon are run.
#
# Use the samba_export_all_ro or samba_export_all_rw Boolean to share system
# directories. To share such directories and only allow read-only
permissions:
# setsebool -P samba_export_all_ro on
# To share such directories and allow read and write permissions:
# setsebool -P samba_export_all_rw on
#
# To run scripts (preexec/root prexec/print command/...), copy them to the
# /var/lib/samba/scripts/ directory so that SELinux will allow smbd to
run them.
# Note that if you move the scripts to /var/lib/samba/scripts/, they retain
# their existing SELinux labels, which may be labels that SELinux does
not allow
# smbd to run. Copying the scripts will result in the correct SELinux
labels.
# Run the "restorecon -R -v /var/lib/samba/scripts" command as the root
user to
# apply the correct SELinux labels to these files.
#
#--------------
#
#======================= Global Settings
=====================================
[global]
# ----------------------- Network-Related Options -------------------------
#
# workgroup = the Windows NT domain name or workgroup name, for example,
MYGROUP.
#
# server string = the equivalent of the Windows NT Description field.
#
# netbios name = used to specify a server name that is not tied to the
hostname.
#
# interfaces = used to configure Samba to listen on multiple network
interfaces.
# If you have multiple interfaces, you can use the "interfaces =" option to
# configure which of those interfaces Samba listens on. Never omit the
localhost
# interface (lo).
#
# hosts allow = the hosts allowed to connect. This option can also be
used on a
# per-share basis.
#
# hosts deny = the hosts not allowed to connect. This option can also be
used on
# a per-share basis.
#
# max protocol = used to define the supported protocol. The default is
NT1. You
# can set it to SMB2 if you want experimental SMB2 support.
#
; workgroup = MYGROUP
workgroup = NBMDARTFORD
server string = Samba Server Version %v
; netbios name = MYSERVER
netbios name = SCARECROW
; interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24
; hosts allow = 127. 192.168.12. 192.168.13.
; hosts allow = 127. 192.168.1.
; max protocol = SMB2
# --------------------------- Logging Options -----------------------------
#
# log file = specify where log files are written to and how they are split.
#
# max log size = specify the maximum size log files are allowed to
reach. Log
# files are rotated when they reach the size specified with "max log size".
#
# log files split per-machine:
log file = /var/log/samba/log.%m
# maximum size of 50KB per log file, then rotate:
max log size = 50
# ----------------------- Standalone Server Options ------------------------
#
# security = the mode Samba runs in. This can be set to user, share
# (deprecated), or server (deprecated).
#
# passdb backend = the backend used to store user information in. New
# installations should use either tdbsam or ldapsam. No additional
configuration
# is required for tdbsam. The "smbpasswd" utility is available for backwards
# compatibility.
#
security = user
passdb backend = tdbsam
map to guest = Bad User
guest account = nobody
# ----------------------- Domain Members Options ------------------------
#
# security = must be set to domain or ads.
#
# passdb backend = the backend used to store user information in. New
# installations should use either tdbsam or ldapsam. No additional
configuration
# is required for tdbsam. The "smbpasswd" utility is available for backwards
# compatibility.
#
# realm = only use the realm option when the "security = ads" option is set.
# The realm option specifies the Active Directory realm the host is a
part of.
#
# password server = only use this option when the "security = server"
# option is set, or if you cannot use DNS to locate a Domain Controller. The
# argument list can include My_PDC_Name, [My_BDC_Name], and
[My_Next_BDC_Name]:
#
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
#
# Use "password server = *" to automatically locate Domain Controllers.
; security = domain
; passdb backend = tdbsam
; realm = MY_REALM
; password server = <NT-Server-Name>
# ----------------------- Domain Controller Options ------------------------
#
# security = must be set to user for domain controllers.
#
# passdb backend = the backend used to store user information in. New
# installations should use either tdbsam or ldapsam. No additional
configuration
# is required for tdbsam. The "smbpasswd" utility is available for backwards
# compatibility.
#
# domain master = specifies Samba to be the Domain Master Browser, allowing
# Samba to collate browse lists between subnets. Do not use the "domain
master"
# option if you already have a Windows NT domain controller performing
this task.
#
# domain logons = allows Samba to provide a network logon service for
Windows
# workstations.
#
# logon script = specifies a script to run at login time on the client.
These
# scripts must be provided in a share named NETLOGON.
#
# logon path = specifies (with a UNC path) where user profiles are stored.
#
#
; security = user
; passdb backend = tdbsam
domain master = yes
domain logons = yes
# the following login script name is determined by the machine name
# (%m):
; logon script = %m.bat
# the following login script name is determined by the UNIX user used:
; logon script = %u.bat
logon path = \\%L\Profiles\%U
logon drive = H:
logon home = \\%L\%U
# use an empty path to disable profile support:
; logon path =
# various scripts can be used on a domain controller or a stand-alone
# machine to add or delete corresponding UNIX accounts:
add user script = /usr/sbin/useradd "%u" -n -g users
add group script = /usr/sbin/groupadd "%g"
add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M
-d /nohome -s /bin/false "%u"
delete user script = /usr/sbin/userdel "%u"
delete user from group script = /usr/sbin/userdel "%u" "%g"
delete group script = /usr/sbin/groupdel "%g"
;admin users = matthew.broadhead
admin users = richard.broadhead
# ----------------------- Browser Control Options
----------------------------
#
# local master = when set to no, Samba does not become the master browser on
# your network. When set to yes, normal election rules apply.
#
# os level = determines the precedence the server has in master browser
# elections. The default value should be reasonable.
#
# preferred master = when set to yes, Samba forces a local browser
election at
# start up (and gives itself a slightly higher chance of winning the
election).
#
; local master = no
; os level = 33
; preferred master = yes
#----------------------------- Name Resolution
-------------------------------
#
# This section details the support for the Windows Internet Name Service
(WINS).
#
# Note: Samba can be either a WINS server or a WINS client, but not both.
#
# wins support = when set to yes, the NMBD component of Samba enables
its WINS
# server.
#
# wins server = tells the NMBD component of Samba to be a WINS client.
#
# wins proxy = when set to yes, Samba answers name resolution queries on
behalf
# of a non WINS capable client. For this to work, there must be at least one
# WINS server on the network. The default is no.
#
# dns proxy = when set to yes, Samba attempts to resolve NetBIOS names
via DNS
# nslookups.
wins support = yes
; wins server = w.x.y.z
; wins proxy = yes
; dns proxy = yes
# --------------------------- Printing Options -----------------------------
#
# The options in this section allow you to configure a non-default printing
# system.
#
# load printers = when set you yes, the list of printers is automatically
# loaded, rather than setting them up individually.
#
# cups options = allows you to pass options to the CUPS library. Setting
this
# option to raw, for example, allows you to use drivers on your Windows
clients.
#
# printcap name = used to specify an alternative printcap file.
#
load printers = yes
cups options = raw
; printcap name = /etc/printcap
# obtain a list of printers automatically on UNIX System V systems:
; printcap name = lpstat
; printing = cups
# --------------------------- File System Options
---------------------------
#
# The options in this section can be un-commented if the file system
supports
# extended attributes, and those attributes are enabled (usually via the
# "user_xattr" mount option). These options allow the administrator to
specify
# that DOS attributes are stored in extended attributes and also make
sure that
# Samba does not change the permission bits.
#
# Note: These options can be used on a per-share basis. Setting them
globally
# (in the [global] section) makes them the default for all shares.
; map archive = no
; map hidden = no
; map read only = no
; map system = no
; store dos attributes = yes
#============================ Share Definitions
==============================
[homes]
comment = Home Directories
browseable = no
writable = yes
valid users = %S
; valid users = MYDOMAIN\%S
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
guest ok = no
writable = no
printable = yes
# Un-comment the following and create the netlogon directory for Domain
Logons:
[netlogon]
comment = Network Logon Service
path = /var/lib/samba/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share.
# The default is to use the user's home directory:
[Profiles]
path = /var/lib/samba/profiles
browseable = no
read only = no
; create mask = 0600
; directory mask = 0700
profile acls = yes
; csc policy = disable
; guest ok = yes
# A publicly accessible directory that is read only, except for users in the
# "staff" group (which have write permissions):
; [public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = +staff
[software]
path = /home/software
read only = no
valid users = @users
write list = @users
browseable = no
# force create mode = 770
create mask = 0664
force directory mode = 0775
[legal]
path = /home/legal
read only = no
valid users = @users
write list = @users
writable = yes
#force create mode = 770
create mask = 0664
force directory mode = 0775
[laserform]
path = /home/laserform
read only = no
valid users = @users
valid users = +users
force create mode = 770
[applications]
path = /home/applications
read only = no
guest ok = yes
[scans]
path = /home/scans
read only = no
guest ok = yes
public = yes
On 06/12/2018 11:54, Rowland Penny via samba wrote:
> On Thu, 6 Dec 2018 11:41:04 +0100
> Matthew Broadhead via samba <samba at lists.samba.org> wrote:
>
>> just checked the logs and i get this
>>
>> [root at localhost ~]# tail /var/log/samba/log.rnp00267380a647
>> [2018/12/05 11:27:36.333627, 0]
>> ../lib/param/loadparm.c:1844(lpcfg_do_service_parameter)
>> Ignoring unknown parameter "profile acls"
>> [2018/12/05 11:51:20.390991, 0]
>> ../lib/param/loadparm.c:784(lpcfg_map_parameter)
>> Unknown parameter encountered: "profile acls"
>> [2018/12/05 11:51:20.391441, 0]
>> ../lib/param/loadparm.c:1844(lpcfg_do_service_parameter)
>> Ignoring unknown parameter "profile acls"
>> [2018/12/05 11:53:51.060095, 0]
>> ../lib/param/loadparm.c:784(lpcfg_map_parameter)
>> Unknown parameter encountered: "profile acls"
>> [2018/12/05 11:53:51.060209, 0]
>> ../lib/param/loadparm.c:1844(lpcfg_do_service_parameter)
>> Ignoring unknown parameter "profile acls"
>> [root at localhost ~]# tail -n 200 /var/log/samba/log.rnp00267380a647
>> [2018/12/05 10:06:21.081708, 0]
>> ../lib/param/loadparm.c:784(lpcfg_map_parameter)
>> Unknown parameter encountered: "profile acls"
>> [2018/12/05 10:06:21.081856, 0]
>> ../lib/param/loadparm.c:1844(lpcfg_do_service_parameter)
>> Ignoring unknown parameter "profile acls"
>> [2018/12/05 11:27:36.333489, 0]
>> ../lib/param/loadparm.c:784(lpcfg_map_parameter)
>> Unknown parameter encountered: "profile acls"
>> [2018/12/05 11:27:36.333627, 0]
>> ../lib/param/loadparm.c:1844(lpcfg_do_service_parameter)
>> Ignoring unknown parameter "profile acls"
>> [2018/12/05 11:51:20.390991, 0]
>> ../lib/param/loadparm.c:784(lpcfg_map_parameter)
>> Unknown parameter encountered: "profile acls"
>> [2018/12/05 11:51:20.391441, 0]
>> ../lib/param/loadparm.c:1844(lpcfg_do_service_parameter)
>> Ignoring unknown parameter "profile acls"
>> [2018/12/05 11:53:51.060095, 0]
>> ../lib/param/loadparm.c:784(lpcfg_map_parameter)
>> Unknown parameter encountered: "profile acls"
>> [2018/12/05 11:53:51.060209, 0]
>> ../lib/param/loadparm.c:1844(lpcfg_do_service_parameter)
>> Ignoring unknown parameter "profile acls"
>>
>> On 05/12/2018 20:08, David Roth via samba wrote:
>>> Does anything show up in the Samba logs for this?
>>>
>>> On Wed, Dec 5, 2018 at 10:29 AM Matthew Broadhead via samba <
>>> samba at lists.samba.org> wrote:
>>>
>>>> The server is using centos-release-7-6.1810.2.el7.centos.x86_64.
>>>> After an automatic yum update on the morning of 4th December 2018
>>>> from samba-4.7.1-9.el7_5.x86_64 to samba-4.8.3-4.el7.x86_64 we can
>>>> no longer scan from a Canon Aficio MP 301 to a network share
>>>> (guest allowed). Scanning to windows machines works fine.
>>>>
>>>>
>>
> The 'profile acls' parameter was removed at 4.8.0.
> It might help if you post your smb.conf
>
> Rowland
>
More information about the samba
mailing list