[Samba] "net view" gets me "System error 71 has occured" and "no more connections ...."
L.P.H. van Belle
belle at bazuin.nl
Wed Sep 6 08:00:23 UTC 2017
Hai Jobst,
Ok i've re-read you thread, and the first thing i think of run :
net config server /autodisconnect
And bit more in the IP stack reset ip and winsock stacks.
netsh int ip reset
netsh winsock reset
To make sure it is'nt some old windows thing.
Can you try that.
And run on the server where your trying to connect to.
smbstatus -a
Lets see what and how its connected now.
You can anonimize domainnames and ips. These are not important.
Try to add the os what belongs to the ip, that helps in identifying the problem.
Greetz,
Louis
> -----Oorspronkelijk bericht-----
> Van: Jobst Schmalenbach [mailto:jobst at barrett.com.au]
> Verzonden: woensdag 6 september 2017 7:50
> Aan: L.P.H. van Belle
> CC: samba at lists.samba.org
> Onderwerp: Re: [Samba] "net view" gets me "System error 71
> has occured" and "no more connections ...."
>
> Well, put it this way - I thought I had given enough
> information as I gave the OS version plus the major Samba
> versions plus the one change I made in smb.conf.
>
> CentOS 6.9, all patches
> Windows 7 Prof, all patches
> FROM samba-3.6.23-43.el6_9.x86_64
> TO samba-4.2.10-10.el6_9.x86_64
>
> Here is my smb.conf file.
> Note there are more shares but they would look the same as
> the share shown - just with different paths.
> --------------------------------------------------------------
> ------------------------------------------
> # Global parameters
> [global]
> workgroup = DOMAINSERVER
> server string = Domain Server
> netbios name = nb_DOMAINSERVER
> netbios aliases = nb_DOMAINSERVER
> username map = /etc/samba/smbusers
>
> # used to have more than one interface, hence:
> interfaces = eth0, lo
> bind interfaces only = yes
>
> #socket options = IPTOS_LOWDELAY TCP_NODELAY socket options
> = TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIVE SO_RCVBUF=131072
> SO_SNDBUF=131072
>
> # Logging, what, how much, etc
> log level = 1
> syslog = 0
> log file = /var/log/samba/samba.log
> max log size = 10000000
>
> # Auditing
> # This is the default
> # it can be overwritten for each of the shares below.
> # you must specify the next one within the shares:
> # full_audit:success = rename unlink rmdir mkdir write pwrite link
> vfs objects = full_audit
> full_audit:prefix = %u|%I|%m|%S
> full_audit:failure = none
> full_audit:facility = LOCAL4
> full_audit:priority = NOTICE
> full_audit:success = none
> full_audit:failure = none
>
> # adding users
> add user script = /usr/sbin/useradd -m %u delete user
> script = /usr/sbin/userdel -r %u add group script =
> /usr/sbin/groupadd %g delete group script =
> /usr/sbin/groupdel %g add user to group script =
> /usr/sbin/usermod -G %g %u add machine script =
> /usr/sbin/useradd -s /bin/false -d /dev/null %u
>
> # passwd stuff
> private dir = /var/lib/samba/private
> passdb backend = smbpasswd:/var/lib/samba/private/smbpasswd
> pam password change = Yes
> passwd program = /usr/bin/passwd %u
> unix password sync = yes
> passwd chat = *password* %n\n *password* %n\n *successfully*
> # passwd chat = *new*password* %n\n *new*password*(again)
> %n\n *password*changed # passwd chat debug = Yes
>
> # old
> # idmap uid = 500-10000000
> # idmap gid = 500-10000000
> # new
> idmap config *: backend = tdb
> idmap config *: range = 1000000-1999999
> idmap config DOMAINSERVER : default = Yes idmap config
> DOMAINSERVER : backend = <idmap backend>
> idmap config DOMAINSERVER : range = 500-999999
>
> winbind use default domain = Yes
> winbind nested groups = Yes
> winbind normalize names = no
>
> # domain stuff
> logon script = user.cmd
> logon path = \\DOMAINSERVER\profiles\%u logon drive = Z:
> logon home = \\DOMAINSERVER\%u\samba-homeshare domain
> logons = Yes os level = 200 domain master = Yes preferred
> master = Yes dns proxy = Yes wins support = Yes security =
> user encrypt passwords = Yes hosts allow = 192.168.0., 127.
> guest account = nobody
> usershare allow guests = No
> name resolve order = hosts wins bcast lmhosts
>
> # printer setup
> load printers = Yes
> printing = cups
> printcap name = cups
> printcap = cups
> printcap cache time = 750
> cups options = raw
> read raw = yes
> write raw = yes
> oplocks = yes
> max xmit = 65535
> dead time = 15
> getwd cache = yes
>
> # unix extensions = yes
> unix extensions = no
>
> # protocol versions
> # Stop using SMB1, period.
> # server min protocol' is the same as 'min protocol', hence
> min protocol = SMB2
>
> [printers]
> comment = "All Printer Spool Area"
> path = /var/spool/samba
> valid users = @domainusers, @domainadministrators
> create mask = 0600
> printable = Yes
> browseable = No
> writelist = @domainadministrators
> guest ok = Yes
>
> [print$]
> comment = "Printer Driver Download Area"
> path = /samba/PrinterDriverShare
> valid users = @domainusers, @domainadministrators
> create mask = 0775
> force create mode = 0775
> directory mask = 0775
> force directory mode = 06775
> readonly = Yes
> writelist = @domainadministrators
> guest ok = Yes
>
> ##############################################################
> ###########
> #
> # Printers
> #
> ##############################################################
> ###########
>
> [Lexmark]
> comment = "B&W, 40ppm, A4, Duplex Unit, 550 tray"
> path = /var/spool/samba
> browseable = yes
> printable = yes
> writable = no
> guest ok = no
> use client driver = No
> valid users = @domainusers, @domainadministrators, @printops
> admin users = @domainadministrators, @printops
>
> ##############################################################
> ###########
> #
> # SERVER SHARES
> #
> ##############################################################
> ###########
>
> [netlogon]
> comment = Network Logon Service
> path = /samba/NetLogon
> browseable = Yes
> guest ok = yes
> admin users = root
> full_audit:success = none
> full_audit:failure = none
> # this is required for log files to be written to
> read only = No
> write list = @domainusers, @domainadministrators, clientadmin
>
> [profiles]
> comment = Roaming Profile Share
> path = /samba/Profiles/
> read only = No
> create mask = 0600
> directory mask = 0700
> browseable = yes
> # you MUST disable caching on shares that have roaming
> profiles stored
> csc policy = disable
> guest ok = no
> valid users = @domainusers, @domainadministrators, score,
> scanuser, template, everybody
> admin users = root
> store dos attributes = yes
> profile acls = yes
> full_audit:success = none
> full_audit:failure = none
> # The next option is a workaround for windows7/10 with SSD
> # Windows? does not tend to ensure that all locks for the
> user profile (ntuser.dat and ntuser.ini) are broken on a fast
> shut down.
> # Another method is to install a delay for the shutdown
> process of Windows by using a GPO Script.
> oplocks = no
>
> [homes]
> comment = Home Directories
> writable = yes
> #valid users = %u
> browseable = yes
> #read only = No
> #admin users = @domainadministrators
> #hide dot files = Yes
> #follow symlinks = yes
> #wide links = yes
> #guest ok = no
> hide files = /desktop.ini/RECYCLER/desktop/$RECYCLE.BIN/
>
> ##############################################################
> ###########
> #
> # USER SHARES
> #
> ##############################################################
> ###########
>
> [Docs]
> comment = "Shared Directory for Documents"
> path = /samba/Documents
> valid users = @domainusers
> admin users = root
> read only = No
> create mask = 0660
> force create mode = 0770
> directory mask = 0770
> force directory mode = 06770
> browseable = Yes
> follow symlinks = yes
> wide links = yes
> guest ok = no
> #full_audit:success = open close unlink mkdir write pwrite
> read pread link
> full_audit:success = none
> full_audit:failure = none
> vfs object = recycle
> recycle:repository = .recycle/%U/%S
> recycle:keeptree = yes
> recycle:versions = yes
> recycle:touch_mtime = yes
> recycle:maxsize = 104857600
>
> [tmp]
> comment = "tmp"
> path = /tmp/
> valid users = root
> admin users = root
> browseable = No
> full_audit:success = none
> full_audit:failure = none
>
> ##############################################################
> ################ FINI
>
> --------------------------------------------------------------
> ------------------------------------------
>
> On Thu, Aug 24, 2017 at 01:09:01PM +0200, L.P.H. van Belle
> (belle at bazuin.nl) wrote:
> > Hai,
> >
> > Sorry if you feel like that but i always have to ask this.
> > Your aswer is not help also for me, because without
> smb.conf OS and samba version we know nothing..
> > We dont like guessing, because everybody's time is precious.
> >
> > So please tell more about your system, i suggest start with.
> > OS
> > Samba version
> > Smb.conf
> > Upgraded from samba 3.??? To samba 4.??
> > The more you tell us te better we can help.
> >
> >
> > Greetz,
> >
> > Louis
> >
> >
> >
> > > -----Oorspronkelijk bericht-----
> > > Van: Jobst Schmalenbach [mailto:jobst at barrett.com.au]
> > > Verzonden: donderdag 24 augustus 2017 13:01
> > > Aan: L.P.H. van Belle
> > > CC: samba at lists.samba.org
> > > Onderwerp: Re: [Samba] "net view" gets me "System error 71 has
> > > occured" and "no more connections ...."
> > >
> > > On Thu, Aug 24, 2017 at 08:35:48AM +0200, L.P.H. van
> Belle via samba
> > > (samba at lists.samba.org) wrote:
> > > > Your problem starts here :
> > > > > - changed from samba 3 to samba 4
> > > > And.
> > > > > - no changes to smb.conf
> > > > ... Its possible, but lets see.. the smb.conf.
> > > >
> > > > Then go here : https://www.samba.org/samba/history/
> > > > Review the parameter changes, and adjust you smb.conf.
> > >
> > > I read all the migration manuals that I could find on the
> net before
> > > I switched, nothing was needed to be changed.
> > > Also, this answer is of absolute no help and makes people want to
> > > just run away and seek better forums!
> > >
> > > J
> > >
> > >
> >
>
> --
> Keyboard not found - please clean up desktop!
>
> | |0| | Jobst Schmalenbach, General Manager
> | | |0| Barrett & Sales Essentials
> |0|0|0| +61 3 9533 0000, POBox 277, Caulfield South,
> 3162, Australia
>
>
More information about the samba
mailing list