[Samba] Unable to upload printer drivers

[L.P.H. van Belle]

Hai, 

Sorry for the slow reaction here. I was few days out of the office. 
But can you try the universal 2 driver. That one works fine for me. 
And if you send me the exact driver your trying to me, i'll test that one in my setup. 

Greetz, 

Louis
 

> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens Manu 
> Baylac via samba
> Verzonden: woensdag 1 november 2017 19:58
> Aan: samba at lists.samba.org
> Onderwerp: [Samba] Unable to upload printer drivers
> 
> 	Hi all,
> 
> 
> i get struck with nearly the same problem as here :
> https://lists.samba.org/archive/samba/2016-December/205088.html
> excepted the NT_ error.
> 
> And the thread ends suddenly without solution. And i tested all that 
> Louis and Rowland proposed.
> 
> Printer server as domain member but here with rid backend.
> Debian stretch : samba 4.5.12 (debian package), also tested 
> with 4.6.7 
> and 4.6.8 (Louis package)
> Windows 10 64 bits
> Posix acl
> SePrivileges ok.
> 
> And i also tested on my AD DC with Windows ACL, same error. 
> But i want 
> the print server on a domain member.
> 
> i followed all the wiki pages about setup a print server.
> 
> My printer is a Toshiba e-studio 4555CSE and i downloaded the driver 
> from the official web site (type 3),and i tested with others printers 
> randomly chosen on the net (epson, brother,...)
> 
> In printmanagement.msc i can add the server, and i can see 
> the printer 
> configured in cups.
> 
> On windows side, upload seems to go fine but 2 seconds after 
> the end of 
> the progress bar, I've got the message : "Impossible to install xxxx 
> driver, access denied"
> 
> And on print server in syslog :
> 
> Nov  1 18:57:22 winix-test smbd[362]: [2017/11/01 
> 18:57:22.357896,  0] 
> ../source3/rpc_server/spoolss/srv_spoolss_nt.c:8476(_spoolss_A
> ddPrinterDriverEx)
> Nov  1 18:57:22 winix-test smbd[362]:   _spoolss_AddPrinterDriverEx: 
> level 8 not yet implemented
> Nov  1 18:57:22 winix-test smbd[362]: [2017/11/01 
> 18:57:22.458270,  0] 
> ../source3/printing/nt_printing.c:1097(move_driver_file_to_dow
> nload_area)
> Nov  1 18:57:22 winix-test smbd[362]: 
> move_driver_file_to_download_area: Unable to rename 
> [x64/eSf6psf_builtin.dll] to [x64/3/eSf6psf_builtin.dll]: 
> NT_STATUS_SHARING_VIOLATION
> 
> 
> My smb.conf :
> 
> [global]
> 
> security = ADS
>         workgroup = TEST
>         realm = TEST.EUS
> 
>         log file = /var/log/samba/%m.log
>         log level = 10
> 
>         idmap config * : backend = tdb
>         idmap config * : range = 3000-7999
> 
>         idmap config TEST : backend = rid
>         idmap config TEST : range = 10000-999999
> 
>         username map = /var/lib/samba/etc/user.map
> 
>         rpc_server:spoolss = external
>         rpc_daemon:spoolssd = fork
> 
>         spoolss: architecture = Windows x64
> 
> 	printing = CUPS
> 	load printers = no
> 
> [printers]
>         path = /var/spool/samba/
>         printable = yes
> 
> [print$]
>         path = /srv/samba/printers
>         read only = no
> 
> 
> What i missed or stupid thing did ?
> 
> Thanks !
> 
> Regards,
> 
> --
> Manu
> 
> 
> 
> 
> 
> 
> 
> 
> 
> -- 
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
>