[Samba] samba-ad restart fails occasionally
L.P.H. van Belle
belle at bazuin.nl
Fri May 12 11:36:05 UTC 2017
Hai MJ,
You could also try to change the initscript to something like this.
In the init script, at restart, change it to and see if that helps.
restart)
$0 stop
sleep 1
$0 start
And last, bigger change, this part, a "last resort" because if you upgrade you can loose these changes.
> > kill -15 ${PID}
> > for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30; do
> > sleep 3
> > kill -0 ${PID} >/dev/null 2>&1 || break
> > log_warning_msg "...trying once more "
> > kill -15 ${PID}
> > done
You can change that to :
kill -15 ${PID}
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30; do
sleep 3
kill -0 ${PID} >/dev/null 2>&1 || break
log_warning_msg "...trying once more "
# check pid again.
PIDTEST2="$(ps h `cat /var/run/samba/samba.pid` | awk -F" " '{ print $1 }')"
if [ "${PIDTEST2}" != "${PID}" ]; then
kill -9 ${PID}
kill -9 ${PIDTEST2}
fi
# Wait a little and remove stale PID file
sleep 1
if [ -f $PID ] && ! ps h `cat $PID` > /dev/null
then
# Stale PID file (samba was succesfully stopped),
# remove it (should be removed by samba itself IMHO.)
rm -f $PID
fi
done
Backup first, i could not test this.
Greetz,
Louis
> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens mj via samba
> Verzonden: vrijdag 12 mei 2017 12:16
> Aan: samba at lists.samba.org
> Onderwerp: Re: [Samba] samba-ad restart fails occasionally
>
> Hi Louis,
>
> On 05/12/2017 10:19 AM, L.P.H. van Belle via samba wrote:
> > You know there is 4.6.3 for wheezy available?
> Yep. But this has been happening for quite a while already.
> Even from during before 4.4, or actually even earlier.
>
> > What you can do is get the source and get the init from the
> 4.6.3. if
> > you want to stay on the 4.5 sernet line.
> yes, I could play around with those init script, yes. Thanks
> for the suggestion.
>
> Here are the requested files:
> > root at DC2:/etc/logrotate.d# cat sernet-samba
> /var/log/samba/log.samba {
> > size 20M
> > missingok
> > rotate 99
> > compress
> > delaycompress
> > notifempty
> > create 644 root root
> > postrotate
> > service sernet-samba-ad restart > /log.samba-restarts
> > endscript
> > }
> >
> > /var/log/samba/*.old {
> > size 1M
> > missingok
> > rotate 99
> > compress
> > nocreate
> > notifempty
> > postrotate
> > service sernet-samba-ad restart > /samba.old-restarts
> > endscript
> > }
> >
> > /var/log/samba/samba.*.log {
> > size 20M
> > missingok
> > rotate 99
> > compress
> > delaycompress
> > notifempty
> > postrotate
> > service sernet-samba-ad restart > /samba-log-restarts
> > endscript
> > }
> >
> > /var/log/samba/log.smbd {
> > size 20M
> > missingok
> > rotate 99
> > compress
> > delaycompress
> > notifempty
> > create 644 root root
> > postrotate
> > service sernet-samba-ad restart > /smbd.samba-restarts
> > endscript
> > }
>
> And
>
> > root at DC2:/etc/init.d# cat sernet-samba-ad #!/bin/sh # Copyright (c)
> > 2004-2017 SerNet GmbH # # SerNet Samba Team <samba at sernet.de> # ###
> > BEGIN INIT INFO
> > # Provides: sernet-samba-ad ldap slapd
> > # Required-Start: $network $remote_fs
> > # Should-Start: $syslog cupsd
> > # Should-Stop: $syslog cupsd
> > # Required-Stop:
> > # Default-Start: 2 3 4 5
> > # Default-Stop: 0 1 6
> > # Description: initscript for the SAMBA AD services
> > ### END INIT INFO
> >
> > SAMBA_USR_PREFIX=${SAMBA_USR_PREFIX:=/usr}
> > SAMBA_CONF_PREFIX=${SAMBA_CONF_PREFIX:=/etc/samba}
> >
> > SMB_CONF=${SAMBA_CONF_PREFIX}/smb.conf
> > SAMBA_PIDDIR=${SAMBA_PIDDIR:=/var/run/samba}
> >
> > ENV_SAMBA_START_MODE=${SAMBA_START_MODE-}
> > ENV_SAMBA_RESTART_ON_UPDATE=${SAMBA_RESTART_ON_UPDATE-}
> > ENV_SAMBA_IGNORE_NSUPDATE_G=${SAMBA_IGNORE_NSUPDATE_G-}
> > . /etc/default/sernet-samba
> > SAMBA_START_MODE=${ENV_SAMBA_START_MODE:=${SAMBA_START_MODE-}}
> >
> SAMBA_RESTART_ON_UPDATE=${ENV_SAMBA_RESTART_ON_UPDATE:=${SAMBA_RESTART
> > _ON_UPDATE-}}
> >
> SAMBA_IGNORE_NSUPDATE_G=${ENV_SAMBA_IGNORE_NSUPDATE_G:=${SAMBA_IGNORE_
> > NSUPDATE_G-}}
> > . /lib/lsb/init-functions
> >
> > NAME="AD services"
> > BINARY="${SAMBA_USR_PREFIX}/sbin/samba"
> > EXTRA_OPTS="${SAMBA_EXTRA_OPTS-}"
> > PIDFILE="${SAMBA_PIDDIR}/samba.pid"
> > START_MODE="ad"
> >
> > LC_ALL=en_US.UTF-8
> >
> > # Export Spotlight DBUS settings for smbd service test -n
> > "${TRACKER_BUS_TYPE}" && export TRACKER_BUS_TYPE test -n
> > "${DBUS_SESSION_BUS_ADDRESS}" && export DBUS_SESSION_BUS_ADDRESS
> >
> > # Export GNUPGHOME for cleartext password encryption test -n
> > "${GNUPGHOME}" && export GNUPGHOME
> >
> > sernet_verify_configuration()
> > {
> > local _script="$1"
> > local _cmd="$2"
> >
> > if [ ! -x ${BINARY} ] ; then
> > log_failure_msg "${BINARY} not installed ! "
> > return 5
> > fi
> >
> > if ! test "${SAMBA_START_MODE}" = "${START_MODE}" ; then
> > echo "${_script} wants to ${_cmd} but
> SAMBA_START_MODE is set to \"${SAMBA_START_MODE}\"."
> > echo "Disable ${_script} or set SAMBA_START_MODE in"
> > echo "/etc/default/sernet-samba to \"${START_MODE}\"."
> > log_warning_msg "Exiting gracefully now."
> > test x"${_SYSTEMCTL_SKIP_REDIRECT}" = x"true" && {
> > # We need to exit with 0 in order to make
> > # systemd happy.
> > exit 0;
> > }
> > return 6
> > fi
> >
> > if [ x"${SAMBA_IGNORE_NSUPDATE_G}" != x"yes" ]; then
> > CHECK_NSUPDATE_G="`cat /dev/null | nsupdate -g
> 2> /dev/null && echo 1 || echo 0`"
> > if [ ${CHECK_NSUPDATE_G} -eq 0 ]; then
> > echo "WARNING: nsupdate does not
> support the GSS-TSIG mode!"
> > echo "Have a look at
> SAMBA_IGNORE_NSUPDATE_G in /etc/default/sernet-samba."
> > log_warning_msg "Exiting gracefully now."
> > return 6
> > fi
> > fi
> >
> > if [ ! -f ${SMB_CONF} ]; then
> > log_failure_msg "Samba configuration file
> ${SMB_CONF} does not exist."
> > return 6
> > fi
> >
> > if test "${START_MODE}" = "ad" ; then
> > samba-tool testparm --suppress-prompt
> --section-name=global --parameter-name="server role" 2>/dev/null | \
> > grep -q '^active directory domain controller' || {
> > log_warning_msg "Samba not configured
> as active directory domain controller!"
> > return 6
> > }
> > else
> > testparm --suppress-prompt
> --section-name=global --parameter-name="server role" 2>/dev/null | \
> > grep -q '^active directory domain controller' && {
> > log_warning_msg "Samba configured as
> active directory domain controller!"
> > return 6
> > }
> > fi
> >
> > return 0
> > }
> >
> > case "$1" in
> > start)
> > sernet_verify_configuration "$0" "$1" || exit $?
> > echo -n "Starting SAMBA ${NAME} : "
> > test -e ${SAMBA_PIDDIR} || mkdir -m 755 ${SAMBA_PIDDIR}
> >
> > test -e ${PIDFILE} && {
> > PID=$(cat ${PIDFILE})
> > readlink /proc/${PID}/exe | grep -q "^${BINARY}" && {
> > log_warning_msg "Warning: ${BINARY}
> already running ! "
> > exit 0
> > }
> >
> > log_warning_msg "Warning: ${PIDFILE} exists ! "
> > }
> >
> > # remove winbindd pipe to workaround selinux issue
> > WINBINDD_PIPE="${SAMBA_PIDDIR}/winbindd/pipe"
> > test -p ${WINBINDD_PIPE} && rm ${WINBINDD_PIPE}
> >
> > if start_daemon -p ${PIDFILE} ${BINARY} -D
> ${EXTRA_OPTS} >/dev/null ; then
> > log_success_msg ""
> > else
> > log_failure_msg ""
> > exit 1
> > fi
> > ;;
> > stop)
> > sernet_verify_configuration "$0" "$1" || exit 0
> > echo -n "Shutting down SAMBA ${NAME} : "
> > if [ ! -e ${PIDFILE} ] ; then
> > log_warning_msg "Warning: PID file ${PIDFILE}
> does not exist ! "
> > exit 0
> > fi
> >
> > PID=$(cat ${PIDFILE})
> >
> > if ! (readlink /proc/${PID}/exe | grep -q "^${BINARY}") ; then
> > log_warning_msg "Warning: ${BINARY} not running
> with PID=${PID} from ${PIDFILE} ! "
> > exit 0
> > fi
> >
> > kill -15 ${PID}
> > for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
> 19 20 21 22 23 24 25 26 27 28 29 30; do
> > sleep 3
> > kill -0 ${PID} >/dev/null 2>&1 || break
> > log_warning_msg "...trying once more "
> > kill -15 ${PID}
> > done
> >
> > kill -0 ${PID} >/dev/null 2>&1 || {
> > log_success_msg ""
> > rm -f ${PIDFILE}
> > exit 0
> > }
> >
> > log_failure_msg "Error: ${BINARY} still running with
> PID=${PID} from ${PIDFILE}"
> > exit 1
> > ;;
> > try-restart)
> > if $0 status > /dev/null ; then
> > test "${SAMBA_RESTART_ON_UPDATE}" != yes || $0 restart
> > else
> > exit 0
> > fi
> > ;;
> > restart)
> > $0 stop
> > $0 start
> > ;;
> > force-reload)
> > $0 reload
> > ;;
> > reload)
> > sernet_verify_configuration "$0" "$1" || exit $?
> > echo -n "Reloading SAMBA ${NAME} : "
> >
> > if [ ! -e ${PIDFILE} ] ; then
> > log_warning_msg "PID file ${PIDFILE} not available "
> > exit 7
> > fi
> >
> > PID=$(cat ${PIDFILE})
> >
> > if ! (readlink /proc/${PID}/exe | grep -q "^${BINARY}") ; then
> > log_warning_msg "${BINARY} not running with
> PID=${PID} from ${PIDFILE}"
> > exit 7
> > fi
> >
> > killproc ${BINARY} -HUP
> > log_success_msg ""
> > ;;
> > status)
> > sernet_verify_configuration "$0" "$1" || exit $?
> > echo -n "Checking for SAMBA ${NAME} : "
> >
> > if [ ! -e ${PIDFILE} ] ; then
> > log_failure_msg "PID file ${PIDFILE} not available "
> > exit 3
> > fi
> >
> > PID=$(cat ${PIDFILE})
> > kill -0 ${PID} >/dev/null 2>&1 || {
> > log_failure_msg ""
> > exit 3
> > }
> >
> > if ! (readlink /proc/${PID}/exe | grep -q "^${BINARY}") ; then
> > log_failure_msg "${BINARY} not running with
> PID=${PID} from ${PIDFILE}"
> > exit 3
> > fi
> >
> > log_success_msg ""
> > ;;
> > probe)
> > ## Optional: Probe for the necessity of a reload,
> > ## give out the argument which is required for a reload.
> > test ${SMB_CONF} -nt ${PIDFILE} && echo reload
> > ;;
> > *)
> > echo "Usage: $0
> {start|stop|status|try-restart|restart|force-reload|reload|probe}"
> > exit 3
> > ;;
> > esac
>
> I don't think the init scripts for smbd/nmbd/winbindd are
> relevant, as everything is done from the single
> sernet-samba-ad script. (in fact:
> running those other init scripts prints a message that we "need to use
> sernet-samba-ad")
>
> > But i do suggest, upgrade to the 4.6.3 packages or .. Its
> time... To
> > upgrade to jessie, and get the 4.5.8 packages ( or the 4.6.3 )
> Yes, I'll upgrade, you are right: perhaps the big upgrade to
> jessie could solve this...
>
> Thanks for your reply, Louis.
>
> MJ
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: https://lists.samba.org/mailman/options/samba
>
>
More information about the samba
mailing list