[Samba] Windows 98 cannot connect to Samba 3.6.23-45el6 after upgrade from 3.0.33-3.41.el5

Rowland Penny rpenny at samba.org
Mon Dec 11 21:54:07 UTC 2017


On Mon, 11 Dec 2017 16:32:06 -0500
Justin Cantrell via samba <samba at lists.samba.org> wrote:

> On 12/11/2017 04:21 PM, Rowland Penny via samba wrote:
> > On Mon, 11 Dec 2017 15:49:51 -0500
> > Justin Cantrell via samba <samba at lists.samba.org> wrote:
> >
> >> I upgraded a server from CentOS 5 to CentOS 6 and migrated the
> >> samba users, accounts, and files. Everyone reconnected without a
> >> problem except a Win98 user.
> > I take it that you cannot upgrade the Win98 computer.
> No, it's actually a very expensive milling machine.
> >> Is there anything that changed that would disallow a Win98 machine
> >> from connecting.
> > Possibly, you could try reading the release notes you will find
> > here:
> >
> > https://wiki.samba.org/index.php/Samba_Features_added/changed_(by_release)
> >
> >> It doesn't prompt for password.  It just doesn't connect.
> >>
> >> When attempting to map the drive, I get:
> >> "The following error occurred while trying to connect S: to
> >> \\server\folder
> >>
> >> The computer or sharename could not be found. Make sure you typed
> >> it correctly and try again."
> >>
> >> No entries
> >> in /var/log/messages /var/log/samba/smb.log /var/log/secure
> > Have you tried raising the log level in smb.conf ?
> >> I can connect on the same subnet with Windows 10 machines using the
> >> same credentials.
> >>
> > Can you post your smb.conf
> [global]
> 
>      workgroup = myworkgroup
>      netbios name = SERVERNAME
> 
> # server string is the equivalent of the NT Description field
>      server string = Server
> 
> # This option is important for security. It allows you to restrict
> # connections to machines which are on your local network. The
> # following example restricts access to two C class networks and
> # the "loopback" interface. For more examples of the syntax see
> # the smb.conf man page
> 
>      hosts allow = 192.168.1.
> 
> # if you want to automatically load your printer list rather
> # than setting them up individually then you'll need this
>      printcap name = /etc/printcap
> ;    load printers = yes
> 
> # It should not be necessary to spell out the print system type unless
> # yours is non-standard. Currently supported print systems include:
> # bsd, sysv, plp, lprng, aix, hpux, qnx, cups
> ;    printing = cups
> 
> # Uncomment this if you want a guest account, you must add this to 
> /etc/passwd
> # otherwise the user "nobody" is used
> ;  guest account = pcguest
> 
> # this tells Samba to use a separate log file for each machine
> # that connects
>      log file = /var/log/samba/%m.log
> log level = 2
> # Put a capping on the size of the log files (in Kb).
>      max log size = 50
> 
> # Security mode. Most people will want user level security. See
> # security_level.txt for details.
> ;    security = user
> 
> # Use password server option only with security = server
> # The argument list may include:
> #   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
> # or to auto-locate the domain controller/s
> #   password server = *
> ;   password server = <NT-Server-Name>
> 
> # Password Level allows matching of _n_ characters of the password for
> # all combinations of upper and lower case.
> ;  password level = 8
> ;  username level = 8
> 
> # You may wish to use password encryption. Please read
> # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
> # Do not enable this option unless you have read those documents
> ;    encrypt passwords = yes
> ;    smb passwd file = /etc/samba/smbpasswd
> 
> # The following is needed to keep smbclient from spouting spurious
> errors # when Samba is built with support for SSL.
> ;   ssl CA certFile = /usr/share/ssl/certs/ca-bundle.crt
> 
> # The following are needed to allow password changing from Windows to
> # update the Linux system password also.
> # NOTE: Use these with 'encrypt passwords' and 'smb passwd file'
> above. # NOTE2: You do NOT need these to allow workstations to change
> only #        the encrypted SMB passwords. They allow the Unix
> password #        to be kept in sync with the SMB password.
> #   unix password sync = Yes
> ;    unix password sync = No
> #   passwd program = /usr/bin/passwd %u
> #   passwd chat = *New*password* %n\n *Retype*new*password* %n\n 
> *passwd:*all*authentication*tokens*updated*successfully*
> 
> # You can use PAM's password change control flag for Samba. If
> # enabled, then PAM will be used for password changes when requested
> # by an SMB client instead of the program listed in passwd program.
> # It should be possible to enable this without changing your passwd
> # chat parameter for most setups.
> 
>      pam password change = yes
> 
> # Unix users can map to different SMB User names
> ;  username map = /etc/samba/smbusers
> 
> # Using the following line enables you to customise your configuration
> # on a per machine basis. The %m gets replaced with the netbios name
> # of the machine that is connecting
> ;   include = /etc/samba/smb.conf.%m
> 
> # This parameter will control whether or not Samba should obey PAM's
> # account and session management directives. The default behavior is
> # to use PAM for clear text authentication only and to ignore any
> # account or session management. Note that Samba always ignores PAM
> # for authentication in the case of encrypt passwords = yes
> 
>      obey pam restrictions = yes
> 
> # Most people will find that this option gives better performance.
> # See speed.txt and the manual pages for details
>      socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
> 
> # Configure Samba to use multiple interfaces
> # If you have multiple network interfaces then you must list them
> # here. See the man page for details.
> ;   interfaces = 192.168.12.2/24 192.168.13.2/24
> 
> # Configure remote browse list synchronisation here
> #  request announcement to, or browse list sync from:
> #    a specific host or from / to a whole subnet (see below)
> ;   remote browse sync =
> # Cause this host to announce itself to local subnets here
> ;   remote announce = 192.168.1.255 192.168.2.44
> 
> # Browser Control Options:
> # set local master to no if you don't want Samba to become a master
> # browser on your network. Otherwise the normal election rules apply
> ;    local master = yes
> 
> # OS Level determines the precedence of this server in master browser
> # elections. The default value should be reasonable
>      os level = 128
> 
> # Domain Master specifies Samba to be the Domain Master Browser. This
> # allows Samba to collate browse lists between subnets. Don't use this
> # if you already have a Windows NT domain controller doing this job
>      domain master = yes
> 
> # Preferred Master causes Samba to force a local browser election on
> startup # and gives it a slightly higher chance of winning the
> election ;   preferred master = yes
> 
> # Enable this if you want Samba to be a domain logon server for
> # Windows95 workstations.
>      domain logons = yes
> 
> # if you enable domain logons then you may want a per-machine or
> # per user logon script
> # run a specific logon batch file per workstation (machine)
> ;   logon script = %m.bat
> # run a specific logon batch file per username
> ;   logon script = %U.bat
> 
> # Where to store roving profiles (only for Win95 and WinNT)
> #        %L substitutes for this servers netbios name, %U is username
> #        You must uncomment the [Profiles] share below
> ;   logon path = \\%L\Profiles\%U
> 
> # Windows Internet Name Serving Support Section:
> # WINS Support - Tells the NMBD component of Samba to enable it's
> WINS Server
>      wins support = yes
> 
> # WINS Server - Tells the NMBD components of Samba to be a WINS Client
> #    Note: Samba can be either a WINS Server, or a WINS Client, but
> NOT both ;   wins server = w.x.y.z
> 
> # WINS Proxy - Tells Samba to answer name resolution queries on
> # behalf of a non WINS capable client, for this to work there must be
> # at least one    WINS Server on the network. The default is NO.
>      wins proxy = yes
> 
> # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS
> names # via DNS nslookups. The built-in default for versions 1.9.17
> is yes, # this has been changed in version 1.9.18 to no.
> ;    dns proxy = yes
>      username map = /etc/samba/smbusers
> ;    guest ok = no
> ;    guest account = nobody
> 
> # Case Preservation can be handy - system default is _no_
> # NOTE: These can be set on a per share basis
> ;  preserve case = no
> ;  short preserve case = no
> # Default case is normally upper case for all DOS files
> ;  default case = lower
> # Be very careful with case sensitivity - it can break things!
> ;  case sensitive = no
> 
>      follow symlinks = yes
>      wide links = yes
>      unix extensions = no
>      laman auth = yes
>      client lanman auth = yes
>      client plaintext auth = yes
> #============================ Share Definitions 
> ==============================
> [homes]
>      comment = Home Directories
>      browseable = no
>      writeable = yes
>      follow symlinks = yes
>      wide links = yes
>      unix extensions = no
> ;   valid users = %S
> ;   create mode = 0664
> ;   directory mode = 0775
> 
> #=== Administration Group shared directories ===
> 
> [share]
>      comment = shared directory
>      path = /home/share
>      directory mask = 0770
>      force create mode = 0770
>      force directory mode = 0770
>      valid users = +share
> ;    guest ok = no
>      writeable = yes
> 
> 
> 
> > Rowland
> >
> >
> 
> 

You have 'laman auth = yes' , it should be 'lanman auth = yes'

Rowland



More information about the samba mailing list