[Samba] inconsistent DNS information, windows domain member issues..

Jo j.o.l at live.com
Sun Jun 5 17:25:40 UTC 2016


> -----Urspr├╝ngliche Nachricht-----
> Von: Rowland penny [mailto:rpenny at samba.org]
> Gesendet: Sonntag, 5. Juni 2016 17:46
> An: Jo <j.o.l at live.com>
> Cc: 'samba' <samba at lists.samba.org>
> Betreff: Re: AW: [Samba] inconsistent DNS information, windows domain
> member issues..
> 
> On 05/06/16 13:43, Jo wrote:
> >> Your DCs really need to be running at all times, so that replication
> >> can work properly, also each DC should use the other for their DNS
> >> server, anything unknown to the DNS servers on the DCs should be
> >> forwarded to an external DNS that does know or can find out.
> > I understand that they need to be up simultaneously for replication, but
> otherwise that should not be the case. Or why? Imho the point of
> redundancy is that you can tolerate failure. In fact I would like to run this on
> two bananas but haven┬┤t found a usable distribution so far that offers recent
> versions of Samba (and supports encryption at least of the relevant data).
> Running the windows hosts all the time is not an option due to noise, energy
> consumption, etc.
> 
> I take it that by 'bananas' you mean 'banana-pi', this probably suffers
> from the same problems as the rpi, you will probably have to build Samba
> yourself and it will probably be unable to cope with a lot of users etc.

Compared to the Pi the Banana Pro is roughly twice as fast and has gigabit network - it runs all my external networking (bind, nginx reverse proxies and websites) very well, but I am aware it slows down communication considerably if I proxy internal communication (file transfer) through it. For now I assume it should be OK for the number of users and systems I plan to connect, both in the order of 10-20, but the challenge is to get it running in the first place and then sustainable (available, up to date, secure, and with backups). 

> 
> You need to understand that if you only have one DC running, it will
> keep trying to contact the other, and any changes made on the running DC
> will need to be replicated to the other when it does come back up.
> 
> >
> > The point of whether the DC should use the respective other DC for DNS is
> obviously debated here. The DCs do have an upstream forwarder configured
> in bind.
> 
> If you have two DCs, they need to use each other for DNS or you can get
> what is called 'islanding'
> 
> >
> >> Can you please post  /etc/resolv.conf, /etc/hosts and /etc/krb5.conf from
> >> each DC, can you also post the smb.conf file from each DC.
> >>
> > joachim at dc1:~$ cat /etc/resolv.conf
> > # Dynamic resolv.conf(5) file for glibc resolver(3) generated by
> resolvconf(8)
> > #     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE
> OVERWRITTEN
> > nameserver 192.168.177.21
> > search samba.domain
> 
> It is not really a good idea to run 'resolvconf' on a fixed ip machine
> (I take it the DCs do have fixed ipaddresses), I suggest you remove it
> and then set /etc/resolv.conf to:
> 
> nameserver 192.168.177.22
> nameserver 192.168.177.21
> search samba.domain
> 
> Switch the 'nameserver' lines for the second DC
Sorry, reminds me about asking for legal advice. Ask two lawyers, get three opinions, of course conflicting. Afaik the recommended way on Ubuntu is to put the configuration in /etc/network/interfaces:
# The primary network interface
auto enp0s3
iface enp0s3 inet static
        address 192.168.15.22
        netmask 255.255.255.0
        gateway 192.168.15.1
        dns-nameservers 192.168.15.22
        dns-search samba.lindenberg.one

...and I prefer to keep configuration as local as possible, especially as occasionally I need to move systems from one location to the other. With respect to the islands issue Andrew recommended to use the DC on the DC. I am aware of the monitoring issue, but I definitely expect less updates to the DC contents then outages of the network in between. And for my experiments I can wake them explicitly as needed.

> > joachim at dc1:~$ cat /etc/hosts
> > 127.0.0.1       localhost
> > 192.168.177.21  dc1 dc1.samba.domain
> > 192.168.15.22   dc2 dc2.samba.domain
> >
> > # The following lines are desirable for IPv6 capable hosts
> > #::1     localhost ip6-localhost ip6-loopback
> > #ff02::1 ip6-allnodes
> > #ff02::2 ip6-allrouters
> 
> nothing wrong there, except you don't need the line for the other DC
The line for the other DC helps with digging both for comparisions...

> 
> > joachim at dc1:~$ cat /etc/krb5.conf
> > [libdefaults]
> >          default_realm = SAMBA.DOMAIN
> >
> > # The following krb5.conf variables are only for MIT Kerberos.
> >          krb4_config = /etc/krb.conf
> >          krb4_realms = /etc/krb.realms
> >          kdc_timesync = 1
> >          ccache_type = 4
> >          forwardable = true
> >          proxiable = true
> >
> > # The following encryption type specification will be used by MIT Kerberos
> > # if uncommented.  In general, the defaults in the MIT Kerberos code are
> > # correct and overriding these specifications only serves to disable new
> > # encryption types as they are added, creating interoperability problems.
> > #
> > # Thie only time when you might need to uncomment these lines and
> change
> > # the enctypes is if you have local software that will break on ticket
> > # caches containing ticket encryption types it doesn't know about (such as
> > # old versions of Sun Java).
> >
> > #       default_tgs_enctypes = des3-hmac-sha1
> > #       default_tkt_enctypes = des3-hmac-sha1
> > #       permitted_enctypes = des3-hmac-sha1
> >
> > # The following libdefaults parameters are only for Heimdal Kerberos.
> >          v4_instance_resolve = false
> >          v4_name_convert = {
> >                  host = {
> >                          rcmd = host
> >                          ftp = ftp
> >                  }
> >                  plain = {
> >                          something = something-else
> >                  }
> >          }
> >          fcc-mit-ticketflags = true
> >
> > [realms]
> >          ATHENA.MIT.EDU = {
> >                  kdc = kerberos.mit.edu:88
> >                  kdc = kerberos-1.mit.edu:88
> >                  kdc = kerberos-2.mit.edu:88
> >                  admin_server = kerberos.mit.edu
> >                  default_domain = mit.edu
> >          }
> >          MEDIA-LAB.MIT.EDU = {
> >                  kdc = kerberos.media.mit.edu
> >                  admin_server = kerberos.media.mit.edu
> >          }
> >          ZONE.MIT.EDU = {
> >                  kdc = casio.mit.edu
> >                  kdc = seiko.mit.edu
> >                  admin_server = casio.mit.edu
> >          }
> >          MOOF.MIT.EDU = {
> >                  kdc = three-headed-dogcow.mit.edu:88
> >                  kdc = three-headed-dogcow-1.mit.edu:88
> >                  admin_server = three-headed-dogcow.mit.edu
> >          }
> >          CSAIL.MIT.EDU = {
> >                  kdc = kerberos-1.csail.mit.edu
> >                  kdc = kerberos-2.csail.mit.edu
> >                  admin_server = kerberos.csail.mit.edu
> >                  default_domain = csail.mit.edu
> >                  krb524_server = krb524.csail.mit.edu
> >          }
> >          IHTFP.ORG = {
> >                  kdc = kerberos.ihtfp.org
> >                  admin_server = kerberos.ihtfp.org
> >          }
> >          GNU.ORG = {
> >                  kdc = kerberos.gnu.org
> >                  kdc = kerberos-2.gnu.org
> >                  kdc = kerberos-3.gnu.org
> >                  admin_server = kerberos.gnu.org
> >          }
> >          1TS.ORG = {
> >                  kdc = kerberos.1ts.org
> >                  admin_server = kerberos.1ts.org
> >          }
> >          GRATUITOUS.ORG = {
> >                  kdc = kerberos.gratuitous.org
> >                  admin_server = kerberos.gratuitous.org
> >          }
> >          DOOMCOM.ORG = {
> >                  kdc = kerberos.doomcom.org
> >                  admin_server = kerberos.doomcom.org
> >          }
> >          ANDREW.CMU.EDU = {
> >                  kdc = kerberos.andrew.cmu.edu
> >                  kdc = kerberos2.andrew.cmu.edu
> >                  kdc = kerberos3.andrew.cmu.edu
> >                  admin_server = kerberos.andrew.cmu.edu
> >                  default_domain = andrew.cmu.edu
> >          }
> >          CS.CMU.EDU = {
> >                  kdc = kerberos.cs.cmu.edu
> >                  kdc = kerberos-2.srv.cs.cmu.edu
> >                  admin_server = kerberos.cs.cmu.edu
> >          }
> >          DEMENTIA.ORG = {
> >                  kdc = kerberos.dementix.org
> >                  kdc = kerberos2.dementix.org
> >                  admin_server = kerberos.dementix.org
> >          }
> >          stanford.edu = {
> >                  kdc = krb5auth1.stanford.edu
> >                  kdc = krb5auth2.stanford.edu
> >                  kdc = krb5auth3.stanford.edu
> >                  master_kdc = krb5auth1.stanford.edu
> >                  admin_server = krb5-admin.stanford.edu
> >                  default_domain = stanford.edu
> >          }
> >          UTORONTO.CA = {
> >                  kdc = kerberos1.utoronto.ca
> >                  kdc = kerberos2.utoronto.ca
> >                  kdc = kerberos3.utoronto.ca
> >                  admin_server = kerberos1.utoronto.ca
> >                  default_domain = utoronto.ca
> >          }
> >
> > [domain_realm]
> >          .mit.edu = ATHENA.MIT.EDU
> >          mit.edu = ATHENA.MIT.EDU
> >          .media.mit.edu = MEDIA-LAB.MIT.EDU
> >          media.mit.edu = MEDIA-LAB.MIT.EDU
> >          .csail.mit.edu = CSAIL.MIT.EDU
> >          csail.mit.edu = CSAIL.MIT.EDU
> >          .whoi.edu = ATHENA.MIT.EDU
> >          whoi.edu = ATHENA.MIT.EDU
> >          .stanford.edu = stanford.edu
> >          .slac.stanford.edu = SLAC.STANFORD.EDU
> >          .toronto.edu = UTORONTO.CA
> >          .utoronto.ca = UTORONTO.CA
> >
> > [login]
> >          krb4_convert = true
> >          krb4_get_tickets = false
> 
> Here's the thing, your /etc/krb5.conf only needs to look like this:
> 
> [libdefaults]
>          default_realm = SAMBA.DOMAIN
> 
> Everything else is unneeded or the default.
Which explains why it worked without defining the domain on DC1. OK, I removed the garbage...

> 
> > joachim at dc1:~$ cat /etc/samba/smb.conf
> > # Global parameters
> > [global]
> >          workgroup = SAMBA
> >          realm = SAMBA.DOMAIN
> >          netbios name = DC1
> >          server role = active directory domain controller
> >          server services = s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl,
> winbindd, ntp_signd, kcc, dnsupdate
> >          idmap_ldb:use rfc2307 = yes
> >
> > [netlogon]
> >          path = /var/lib/samba/sysvol/samba.domain/scripts
> >          read only = No
> >
> > [sysvol]
> >          path = /var/lib/samba/sysvol
> >          read only = No
> > joachim at dc1:~$
> 
> This looks ok.
> 
> The files on the second DC should be similar to the first, except for
> the obvious name & ip changes.
> 
> >
> >
> >
> > One new piece of mosaic:
> >
> > root at dc2:/home/joachim# tail /var/log/samba/log.samba
> > [2016/06/05 14:28:12.674356,  0]
> ../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
> >    /usr/sbin/samba_dnsupdate: dns_tkey_negotiategss: TKEY is
> unacceptable
> > [2016/06/05 14:28:12.697076,  0]
> ../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
> >    /usr/sbin/samba_dnsupdate: dns_tkey_negotiategss: TKEY is
> unacceptable
> > [2016/06/05 14:28:12.719968,  0]
> ../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
> >    /usr/sbin/samba_dnsupdate: dns_tkey_negotiategss: TKEY is
> unacceptable
> > [2016/06/05 14:28:12.743569,  0]
> ../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
> >    /usr/sbin/samba_dnsupdate: dns_tkey_negotiategss: TKEY is
> unacceptable
> > [2016/06/05 14:28:12.756246,  0]
> ../source4/dsdb/dns/dns_update.c:294(dnsupdate_nameupdate_done)
> >    ../source4/dsdb/dns/dns_update.c:294: Failed DNS update -
> NT_STATUS_UNSUCCESSFUL
> > root at dc2:/home/joachim#
> >
> > I tried to follow
> https://wiki.samba.org/index.php/Dns_tkey_negotiategss:_TKEY_is_unaccep
> table, but may be that is outdated? I found a keytab file at
> /var/lib/samba/private/secrets.keytab and it contains what is described on
> the wiki page:
> >
> > root at dc2:/home/joachim# klist -k /var/lib/samba/private/secrets.keytab
> > Keytab name: FILE:/var/lib/samba/private/secrets.keytab
> > KVNO Principal
> > ---- --------------------------------------------------------------------------
> >     1 HOST/dc2 at SAMBA.DOMAIN
> >     1 HOST/dc2.samba.domain at SAMBA.DOMAIN
> >     1 DC2$@SAMBA.DOMAIN
> >     1 HOST/dc2 at SAMBA.DOMAIN
> >     1 HOST/dc2.samba.domain at SAMBA.DOMAIN
> >     1 DC2$@SAMBA.DOMAIN
> >     1 HOST/dc2 at SAMBA.DOMAIN
> >     1 HOST/dc2.samba.domain at SAMBA.DOMAIN
> >     1 DC2$@SAMBA.DOMAIN
> >     1 HOST/dc2 at SAMBA.DOMAIN
> >     1 HOST/dc2.samba.domain at SAMBA.DOMAIN
> >     1 DC2$@SAMBA.DOMAIN
> >     1 HOST/dc2 at SAMBA.DOMAIN
> >     1 HOST/dc2.samba.domain at SAMBA.DOMAIN
> >     1 DC2$@SAMBA.DOMAIN
> >
> > Do I have to update some configuration path to point to that file? Create a
> link? Or what else to check?
> >
> >
> >
> 
> Are you running an ntp server on each DC? if not, I suggest you do.
I am running ntpd as a client. Why should I configure a server? Which Samba or AD client uses an ntp server on a DC by default?

> 
> How have you set up Bind, can you post your named.conf files.

root at dc2:/home/joachim# cat /etc/bind/named.conf
// This is the primary configuration file for the BIND DNS server named.
//
// Please read /usr/share/doc/bind9/README.Debian.gz for information on the
// structure of BIND configuration files in Debian, *BEFORE* you customize
// this configuration file.
//
// If you are just adding zones, please do that in /etc/bind/named.conf.local

include "/etc/bind/named.conf.options";
include "/etc/bind/named.conf.local";
include "/etc/bind/named.conf.default-zones";
include "/etc/bind/bind.keys";

root at dc2:/home/joachim# cat /etc/bind/named.conf.options
options {
        directory "/var/cache/bind";

        // If there is a firewall between you and nameservers you want
        // to talk to, you may need to fix the firewall to allow multiple
        // ports to talk.  See http://www.kb.cert.org/vuls/id/800113

        // If your ISP provided one or more IP addresses for stable
        // nameservers, you probably want to use them as forwarders.
        // Uncomment the following block, and insert the addresses replacing
        // the all-0's placeholder.

        forwarders {
                192.168.15.2;
        };

        //========================================================================
        // If BIND logs error messages about the root key being expired,
        // you will need to update your keys.  See https://www.isc.org/bind-keys
        //========================================================================
        dnssec-validation no; #auto;

        auth-nxdomain no;    # conform to RFC1035
#       listen-on-v6 { any; };
        allow-query-cache { any; };
        allow-query { any; };
# allow-recursion { any;192.168.0.0/16;localhost; };
        allow-recursion { any; };
        tkey-gssapi-keytab "/var/lib/samba/private/dns.keytab";
};

root at dc2:/home/joachim# cat /etc/bind/named.conf.local
//
// Do any local configuration here
//

// Consider adding the 1918 zones here, if they are not used in your
// organization
//include "/etc/bind/zones.rfc1918";

zone "domain" {
        type master;
        file "/etc/bind/lindenberg.one";
#       allow-transfer { 192.168.177.8 };
        allow-update { key rndc-key; };
};

include "/var/lib/samba/private/named.conf";

I am ommitting named.conf.default-zones as I did not touch that. Note that I do have a zone file for domain but it is not really used right now. Samba.domain is obviously a subdomain served by Samba. And one extra you did not ask for...

root at dc2:/home/joachim# cat /var/lib/samba/private/named.conf
# This DNS configuration is for BIND 9.8.0 or later with dlz_dlopen support.
#
# This file should be included in your main BIND configuration file
#
# For example with
# include "/var/lib/samba/private/named.conf";

#
# This configures dynamically loadable zones (DLZ) from AD schema
# Uncomment only single database line, depending on your BIND version
#
dlz "AD DNS Zone" {
    # For BIND 9.8.x
    # database "dlopen /usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9.so";

    # For BIND 9.9.x
    # database "dlopen /usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_9.so";

    # For BIND 9.10.x
     database "dlopen /usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_10.so";
};

root at dc2:/home/joachim#

I just also tried to replace the nonexisting dns.keytab with secrets.keytab - then I get 
root at dc2:/home/joachim# tail /var/log/samba/log.samba
[2016/06/05 19:16:29.377544,  0] ../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
  /usr/sbin/samba_dnsupdate: update failed: REFUSED
[2016/06/05 19:16:29.404010,  0] ../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
  /usr/sbin/samba_dnsupdate: update failed: REFUSED
[2016/06/05 19:16:29.430791,  0] ../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
  /usr/sbin/samba_dnsupdate: update failed: REFUSED
[2016/06/05 19:16:29.458506,  0] ../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
  /usr/sbin/samba_dnsupdate: update failed: REFUSED
[2016/06/05 19:16:29.472351,  0] ../source4/dsdb/dns/dns_update.c:294(dnsupdate_nameupdate_done)
  ../source4/dsdb/dns/dns_update.c:294: Failed DNS update - NT_STATUS_UNSUCCESSFUL
root at dc2:/home/joachim#

...instead of the "TKEY is unacceptable" before.
> 
> Rowland
> 
> 




More information about the samba mailing list