[Samba] Samba + ldap + cannot find domain
Dave Beach
drbeach4 at gmail.com
Thu Feb 18 10:59:23 UTC 2016
>> This makes no sense to me. Am I missing something obvious?
> You may be, but how can we tell, we cannot see your smb.conf
Complete smb.conf below:
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = DRBHOME
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
# wins support = no
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
interfaces = eth1
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
bind interfaces only = yes
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Cap the size of the individual log files (in KiB).
max log size = 8192
# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server
# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
; passdb backend = tdbsam
passdb backend = ldapsam:ldap://127.0.0.1
; obey pam restrictions = yes
obey pam restrictions = no
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan at informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/sbin/smbldap-passwd -u %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
; pam password change = yes
# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
; map to guest = bad user
map to guest = never
########## Domains ###########
#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#
# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
logon script = netlogon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
add user script = /usr/sbin/smbldap-useradd -m "%u"
# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
add machine script = /usr/sbin/smbldap-useradd -w "%u"
# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g
add group script = /usr/sbin/smbldap-groupadd -p "%g"
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash
# Setup usershare options to enable non-root users to share folders
# with the net usershare command.
# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100
# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
; usershare allow guests = yes
######## added from old config file
time server = yes
security = user
;server string = DRBGATE
domain logons = yes
domain master = yes
lanman auth = no
;ldap admin dn = "cn=Manager,dc=drbhome,dc=ca"
ldap admin dn = "cn=admin,dc=drbhome,dc=ca"
ldap delete dn = yes
ldap group suffix = ou=Groups
ldap idmap suffix = ou=Users
ldap machine suffix = ou=Computers
ldap passwd sync = yes
ldap ssl = off
ldap suffix = dc=drbhome,dc=ca
ldap user suffix = ou=Users
local master = yes
log level = 3
name resolve order = lmhosts host bcast
netbios name = DRBGATE
os level = 20
preferred master = yes
client lanman auth = no
client ntlmv2 auth = yes
client plaintext auth = no
add user to group script = /usr/sbin/smbldap-groupmod -m "%u" "%g"
deadtime = 5
delete group script = /usr/sbin/smbldap-groupdel "%g%
delete user from group script = /usr/sbin/smbldap-groupmod -x "%u" "%g"
delete user script = /usr/sbin/smbldap-userdel "%u"
;enable privileges = yes
encrypt passwords = yes
hosts allow = 192.168.2. 127.
set primary group script = /usr/sbin/smbldap-usermod -g "%g" "%u"
;announce as = NT Server
#======================= Share Definitions =======================
;[homes]
; comment = Home Directories
; browseable = no
# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700
# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# The following parameter makes sure that only "username" can connect
# to \\server\username
# This might need tweaking when using external authentication schemes
; valid users = %S
# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
[netlogon]
comment = Network Logon Service
path = /home/shares/netlogon
; guest ok = yes
; read only = yes
writable = no
; share modes = no
# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700
;[printers]
; comment = All Printers
; browseable = no
; path = /var/spool/samba
; printable = yes
; guest ok = no
; read only = yes
; create mask = 0700
# Windows clients look for this share name as a source of downloadable
# printer drivers
;[print$]
; comment = Printer Drivers
; path = /var/lib/samba/printers
; browseable = yes
; read only = yes
; guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin
#
[common_share]
comment = Common writable share
path = /home/common
read only = no
public = yes
#
[admin_share]
comment = Admin read-only share
path = /home/shared/admin
read only = yes
public = yes
#
[dave_share]
comment = Dave's network drive
path = /home/dave
valid users = dave
public = no
writable = yes
printable = no
#
[bonnie_share]
comment = Bonnie's network drive
path = /home/bonnie
valid users = bonnie
public = no
writable = yes
printable = no
#
[dave_backup]
comment = Dave's backup drive
path = /backup/dave
valid users = dave
public = no
writable = yes
printable = no
#
[bonnie_backup]
comment = Bonnie's backup drive
path = /backup/bonnie
valid users = bonnie
public = no
writable = yes
printable = no
#
[pc-tv_backup]
comment = pc-tv backup drive
path = /backup/pc-tv
valid users = dave
public = no
writable = yes
printable = no
#
[root_share]
path = /
public = yes
writable = yes
valid users = dave
printable = no
browsable = yes
#
More information about the samba
mailing list