[Samba] Why I can not login my shared folder under samba + CentOS 7
truename
dch12 at yeah.net
Sat Dec 3 04:31:31 UTC 2016
The result of accessing from windows is same as accessing from Linux, after I input correct username and password and click connect button, the login dialog re-popup.
Thanks
On 12/02/2016 22:22, Gaiseric Vandal via samba wrote:
Can you access from windows?
I also notice that samba 4.2.10 is no longer a supported version.
On 12/01/16 15:39, truename via samba wrote:
> Following is output of smbclient -L \\127.0.0.1 -U test1:
>
>
>
> Sharename Type Comment
> --------- ---- -------
> data Disk data
> IPC$ IPC IPC Service (Samba Server Version 4.2.10)
> test1 Disk Home Directories
> hp5550-1:7 Printer hp5550-1
> e-STUDIO283:2 Printer e-STUDIO283
> FX3D490A:3 Printer FX3D490A
> HPCP2025:9 Printer HPCP2025
> HPM2727:10 Printer HPM2727
> hp5550-2:8 Printer hp5550-2
> hp-color-LaserJet-5550-172-16-10-214:4 Printer hp-color-LaserJet-5550-172-16-10-214
> ML-1660-Series:1 Printer ML-1660-Series
> ML-1660-Series:11 Printer ML-1660-Series
> topdf:12 Printer topdf
> HP5100:6 Printer HP5100
> hp5000-1:5 Printer hp5000-1
>
> Server Comment
> --------- -------
> LOCALHOST Samba Server Version 4.2.10
>
> Workgroup Master
> --------- -------
> MYGROUP LOCALHOST
>
>
> And following is content of my smb.conf under /etc/samba:
>
>
> # This is the main Samba configuration file. For detailed information about the
> # options listed here, refer to the smb.conf(5) manual page. Samba has a huge
> # number of configurable options, most of which are not shown in this example.
> #
> # The Official Samba 3.2.x HOWTO and Reference Guide contains step-by-step
> # guides for installing, configuring, and using Samba:
> # http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
> #
> # The Samba-3 by Example guide has working examples for smb.conf. This guide is
> # generated daily: http://www.samba.org/samba/docs/Samba-Guide.pdf
> #
> # In this file, lines starting with a semicolon (;) or a hash (#) are
> # comments and are ignored. This file uses hashes to denote commentary and
> # semicolons for parts of the file you may wish to configure.
> #
> # Note: Run the "testparm" command after modifying this file to check for basic
> # syntax errors.
> #
> #---------------
> # Security-Enhanced Linux (SELinux) Notes:
> #
> # Turn the samba_domain_controller Boolean on to allow Samba to use the useradd
> # and groupadd family of binaries. Run the following command as the root user to
> # turn this Boolean on:
> # setsebool -P samba_domain_controller on
> #
> # Turn the samba_enable_home_dirs Boolean on if you want to share home
> # directories via Samba. Run the following command as the root user to turn this
> # Boolean on:
> # setsebool -P samba_enable_home_dirs on
> #
> # If you create a new directory, such as a new top-level directory, label it
> # with samba_share_t so that SELinux allows Samba to read and write to it. Do
> # not label system directories, such as /etc/ and /home/, with samba_share_t, as
> # such directories should already have an SELinux label.
> #
> # Run the "ls -ldZ /path/to/directory" command to view the current SELinux
> # label for a given directory.
> #
> # Set SELinux labels only on files and directories you have created. Use the
> # chcon command to temporarily change a label:
> # chcon -t samba_share_t /path/to/directory
> #
> # Changes made via chcon are lost when the file system is relabeled or commands
> # such as restorecon are run.
> #
> # Use the samba_export_all_ro or samba_export_all_rw Boolean to share system
> # directories. To share such directories and only allow read-only permissions:
> # setsebool -P samba_export_all_ro on
> # To share such directories and allow read and write permissions:
> # setsebool -P samba_export_all_rw on
> #
> # To run scripts (preexec/root prexec/print command/...), copy them to the
> # /var/lib/samba/scripts/ directory so that SELinux will allow smbd to run them.
> # Note that if you move the scripts to /var/lib/samba/scripts/, they retain
> # their existing SELinux labels, which may be labels that SELinux does not allow
> # smbd to run. Copying the scripts will result in the correct SELinux labels.
> # Run the "restorecon -R -v /var/lib/samba/scripts" command as the root user to
> # apply the correct SELinux labels to these files.
> #
> #--------------
> #
> #======================= Global Settings =====================================
>
> [global]
>
> # ----------------------- Network-Related Options -------------------------
> #
> # workgroup = the Windows NT domain name or workgroup name, for example, MYGROUP.
> #
> # server string = the equivalent of the Windows NT Description field.
> #
> # netbios name = used to specify a server name that is not tied to the hostname.
> #
> # interfaces = used to configure Samba to listen on multiple network interfaces.
> # If you have multiple interfaces, you can use the "interfaces =" option to
> # configure which of those interfaces Samba listens on. Never omit the localhost
> # interface (lo).
> #
> # hosts allow = the hosts allowed to connect. This option can also be used on a
> # per-share basis.
> #
> # hosts deny = the hosts not allowed to connect. This option can also be used on
> # a per-share basis.
> #
> # max protocol = used to define the supported protocol. The default is NT1. You
> # can set it to SMB2 if you want experimental SMB2 support.
> #
> workgroup = MYGROUP
> server string = Samba Server Version %v
>
> ; netbios name = MYSERVER
>
> ; interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24
> ; hosts allow = 127. 192.168.12. 192.168.13.
>
> ; max protocol = SMB2
>
> # --------------------------- Logging Options -----------------------------
> #
> # log file = specify where log files are written to and how they are split.
> #
> # max log size = specify the maximum size log files are allowed to reach. Log
> # files are rotated when they reach the size specified with "max log size".
> #
>
> # log files split per-machine:
> log file = /var/log/samba/log.%m
> # maximum size of 50KB per log file, then rotate:
> max log size = 50
>
> # ----------------------- Standalone Server Options ------------------------
> #
> # security = the mode Samba runs in. This can be set to user, share
> # (deprecated), or server (deprecated).
> #
> # passdb backend = the backend used to store user information in. New
> # installations should use either tdbsam or ldapsam. No additional configuration
> # is required for tdbsam. The "smbpasswd" utility is available for backwards
> # compatibility.
> #
>
> security = user
> passdb backend = tdbsam
>
>
> # ----------------------- Domain Members Options ------------------------
> #
> # security = must be set to domain or ads.
> #
> # passdb backend = the backend used to store user information in. New
> # installations should use either tdbsam or ldapsam. No additional configuration
> # is required for tdbsam. The "smbpasswd" utility is available for backwards
> # compatibility.
> #
> # realm = only use the realm option when the "security = ads" option is set.
> # The realm option specifies the Active Directory realm the host is a part of.
> #
> # password server = only use this option when the "security = server"
> # option is set, or if you cannot use DNS to locate a Domain Controller. The
> # argument list can include My_PDC_Name, [My_BDC_Name], and [My_Next_BDC_Name]:
> #
> # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
> #
> # Use "password server = *" to automatically locate Domain Controllers.
>
> ; security = domain
> ; passdb backend = tdbsam
> ; realm = MY_REALM
>
> ; password server = <NT-Server-Name>
>
> # ----------------------- Domain Controller Options ------------------------
> #
> # security = must be set to user for domain controllers.
> #
> # passdb backend = the backend used to store user information in. New
> # installations should use either tdbsam or ldapsam. No additional configuration
> # is required for tdbsam. The "smbpasswd" utility is available for backwards
> # compatibility.
> #
> # domain master = specifies Samba to be the Domain Master Browser, allowing
> # Samba to collate browse lists between subnets. Do not use the "domain master"
> # option if you already have a Windows NT domain controller performing this task.
> #
> # domain logons = allows Samba to provide a network logon service for Windows
> # workstations.
> #
> # logon script = specifies a script to run at login time on the client. These
> # scripts must be provided in a share named NETLOGON.
> #
> # logon path = specifies (with a UNC path) where user profiles are stored.
> #
> #
> ; security = user
> ; passdb backend = tdbsam
>
> ; domain master = yes
> ; domain logons = yes
>
> # the following login script name is determined by the machine name
> # (%m):
> ; logon script = %m.bat
> # the following login script name is determined by the UNIX user used:
> ; logon script = %u.bat
> ; logon path = \\%L\Profiles\%u
> # use an empty path to disable profile support:
> ; logon path =
>
> # various scripts can be used on a domain controller or a stand-alone
> # machine to add or delete corresponding UNIX accounts:
>
> ; add user script = /usr/sbin/useradd "%u" -n -g users
> ; add group script = /usr/sbin/groupadd "%g"
> ; add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M -d /nohome -s /bin/false "%u"
> ; delete user script = /usr/sbin/userdel "%u"
> ; delete user from group script = /usr/sbin/userdel "%u" "%g"
> ; delete group script = /usr/sbin/groupdel "%g"
>
>
> # ----------------------- Browser Control Options ----------------------------
> #
> # local master = when set to no, Samba does not become the master browser on
> # your network. When set to yes, normal election rules apply.
> #
> # os level = determines the precedence the server has in master browser
> # elections. The default value should be reasonable.
> #
> # preferred master = when set to yes, Samba forces a local browser election at
> # start up (and gives itself a slightly higher chance of winning the election).
> #
> ; local master = no
> ; os level = 33
> ; preferred master = yes
>
> #----------------------------- Name Resolution -------------------------------
> #
> # This section details the support for the Windows Internet Name Service (WINS).
> #
> # Note: Samba can be either a WINS server or a WINS client, but not both.
> #
> # wins support = when set to yes, the NMBD component of Samba enables its WINS
> # server.
> #
> # wins server = tells the NMBD component of Samba to be a WINS client.
> #
> # wins proxy = when set to yes, Samba answers name resolution queries on behalf
> # of a non WINS capable client. For this to work, there must be at least one
> # WINS server on the network. The default is no.
> #
> # dns proxy = when set to yes, Samba attempts to resolve NetBIOS names via DNS
> # nslookups.
>
> ; wins support = yes
> ; wins server = w.x.y.z
> ; wins proxy = yes
>
> ; dns proxy = yes
>
> # --------------------------- Printing Options -----------------------------
> #
> # The options in this section allow you to configure a non-default printing
> # system.
> #
> # load printers = when set you yes, the list of printers is automatically
> # loaded, rather than setting them up individually.
> #
> # cups options = allows you to pass options to the CUPS library. Setting this
> # option to raw, for example, allows you to use drivers on your Windows clients.
> #
> # printcap name = used to specify an alternative printcap file.
> #
>
> load printers = yes
> cups options = raw
>
> ; printcap name = /etc/printcap
> # obtain a list of printers automatically on UNIX System V systems:
> ; printcap name = lpstat
> ; printing = cups
>
> # --------------------------- File System Options ---------------------------
> #
> # The options in this section can be un-commented if the file system supports
> # extended attributes, and those attributes are enabled (usually via the
> # "user_xattr" mount option). These options allow the administrator to specify
> # that DOS attributes are stored in extended attributes and also make sure that
> # Samba does not change the permission bits.
> #
> # Note: These options can be used on a per-share basis. Setting them globally
> # (in the [global] section) makes them the default for all shares.
>
> ; map archive = no
> ; map hidden = no
> ; map read only = no
> ; map system = no
> ; store dos attributes = yes
>
>
> #============================ Share Definitions ==============================
>
> [homes]
> comment = Home Directories
> browseable = no
> writable = yes
> ; valid users = %S
> ; valid users = MYDOMAIN\%S
>
> [printers]
> comment = All Printers
> path = /var/spool/samba
> browseable = no
> guest ok = no
> writable = no
> printable = yes
>
> # Un-comment the following and create the netlogon directory for Domain Logons:
> ; [netlogon]
> ; comment = Network Logon Service
> ; path = /var/lib/samba/netlogon
> ; guest ok = yes
> ; writable = no
> ; share modes = no
>
> # Un-comment the following to provide a specific roving profile share.
> # The default is to use the user's home directory:
> ; [Profiles]
> ; path = /var/lib/samba/profiles
> ; browseable = no
> ; guest ok = yes
>
> # A publicly accessible directory that is read only, except for users in the
> # "staff" group (which have write permissions):
> ; [public]
> ; comment = Public Stuff
> ; path = /home/samba
> ; public = yes
> ; writable = yes
> ; printable = no
> ; write list = +staff
>
> [data]
> comment = data
> path = /home/myname/data
> valid users = test1
> write list = test1
> create mask = 0754
> sync always = Yes
> ; hide dot files = yes
> ; writeable = no
> ; browseable = yes
>
>
> Thanks
>
>
>
>
>
>
>
>
> 在 2016-12-02 00:02:41，"Gaiseric Vandal via samba" <samba at lists.samba.org> 写道：
>> Did you configure this as a domain controller or a domain member ? Or
>> this just a standalone machine.
>>
>> From the command line can you try the following
>>
>> smbclient -L \\127.0.0.1 -U test1
>>
>> or maybe
>>
>> smbclient -d3 -L \\127.0.0.1 -U test1
>>
>>
>> You may also want to try 'MACHINENAME\test1' as the user name.
>>
>>
>>
>>
>>
>> On 12/01/16 10:17, truename via samba wrote:
>>> Hi,
>>>
>>> I install samba by:
>>>
>>> sudo yum install samba.x86_64
>>>
>>> I edit /etc/samba/smb.conf by adding follows：
>>>
>>> [data]
>>> comment = data
>>> path = /home/myname/data
>>> valid users = test1
>>> write list = test1
>>> create mask = 0754
>>> sync always = Yes
>>> ; hide dot files = yes
>>> ; writeable = no
>>> ; browseable = yes
>>>
>>> Then take effect my config:
>>>
>>> service smb restart
>>>
>>> I create shared folder:
>>>
>>> cd ~
>>> mkdir data
>>>
>>> I create user:
>>>
>>> useradd test1
>>> smbpasswd -a test1
>>> <then password>
>>>
>>>
>>> Then I open my file manager and input:
>>>
>>> smb://127.0.0.1
>>>
>>> A login form popup, I enter username: test1 and the password, the login form returns again, I found I can not enter the shared folder by that account.
>>>
>>> Thanks
>>
>>
>> --
>> To unsubscribe from this list go to the following URL and read the
>> instructions: https://lists.samba.org/mailman/options/samba
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba
More information about the samba
mailing list