[Samba] Workstation Limited to NT1 Protocol

[Bill Baird]

Just saw that, as well.

After running the commands to enable SMB2 & SMB3 and rebooting...no luck.
Will keep searching for other registry settings.

On Tue, Apr 19, 2016 at 3:27 PM, lingpanda101 at gmail.com <
lingpanda101 at gmail.com> wrote:

> On 4/19/2016 3:24 PM, Bill Baird wrote:
>
> When I search for "smb2", I get nothing in my log file for the NT1 limited
> system. If it is a workstation issue, that would be great. I'll search
> around for what settings to change. Maybe SMB2 was inadvertently disabled.
>
> Thanks for all of your help on this!
>
> On Tue, Apr 19, 2016 at 3:20 PM, <lingpanda101 at gmail.com>
> lingpanda101 at gmail.com <lingpanda101 at gmail.com> wrote:
>
>> On 4/19/2016 3:11 PM, Bill Baird wrote:
>>
>>> [2016/04/19 15:04:46.352217, 10, pid=21600, effective(0, 0), real(0, 0)]
>>> ../source3/smbd/smb2_server.c:3068(smbd_smb2_first_negprot)
>>>   smbd_smb2_first_negprot: packet length 102
>>>
>> Everything looks OK on your MS. Since it's only one workstation I'm
>> certain it's the issue. You want to look for this line in your logs. This
>> is what you posted from your SMB2 connection.
>>
>> [2016/04/19 15:04:46.352217, 10, pid=21600, effective(0, 0), real(0, 0)]
>> ../source3/smbd/smb2_server.c:3068(smbd_smb2_first_negprot)
>>   smbd_smb2_first_negprot: packet length 102
>>
>> Specifically this 'smbd_smb2_first_negprot'. The workstation should
>> attempt SMB2 and fall back if it can't. Do you even see this process?
>>
>> You can also force SMB2 in the registry of the windows workstation if
>> need be. I wouldn't advise it but it can be done.
>>
>>
>>
>>
>> --
>> -James
>>
>>
>
>
> --
> *Bill Baird*
> Chief Technology Officer
> Office: 845-876-8228 x311
> Mobile: 203-545-0437
> www.phoenixmi.com
>
> Look here if you want to force SMB2 on the windows side.
>
> https://support.microsoft.com/en-us/kb/2696547
>
> --
> -James
>
>


-- 
*Bill Baird*
Chief Technology Officer
Office: 845-876-8228 x311
Mobile: 203-545-0437
www.phoenixmi.com