[Samba] session setup failed: NT_STATUS_LOGON_FAILURE
mathias dufresne
infractory at gmail.com
Wed Nov 4 10:44:47 UTC 2015
Once again:
Samba always comes with its own users database.
You have Samba so you have Samba users in addition of systems users. You
have to use smbpasswd -a username. And telling that, I'm not asking you
anything, I'm telling you what you have to do to solve your issue.
2015-11-04 11:28 GMT+01:00 Roger Wu <wu1004 at gmail.com>:
> 2015-11-04 17:11 GMT+08:00 Rowland Penny <rowlandpenny241155 at gmail.com>:
>
> > On 04/11/15 06:24, Roger Wu wrote:
> >
> >> Hi, Rowland,
> >>
> >> Thanks for your advise. I've been updated the version to 4.2.5, the rpm
> >> query is as below,
> >> but it still didn't work.
> >>
> >> [root at testcad16 samba]# rpm -qa | grep samba
> >> sernet-samba-4.2.5-19.el6.x86_64
> >> sernet-samba-libs-4.2.5-19.el6.x86_64
> >> sernet-samba-libsmbclient0-4.2.5-19.el6.x86_64
> >> sernet-samba-client-4.2.5-19.el6.x86_64
> >> sernet-samba-common-4.2.5-19.el6.x86_64
> >>
> >> [root at testcad16 samba]# netstat -tulnp| grep mbd
> >> tcp 0 0 0.0.0.0:445 <http://0.0.0.0:445> 0.0.0.0:*
> >> LISTEN 27139/smbd
> >> tcp 0 0 0.0.0.0:139 <http://0.0.0.0:139> 0.0.0.0:*
> >> LISTEN 27139/smbd
> >> tcp 0 0 :::445 :::*
> >> LISTEN 27139/smbd
> >> tcp 0 0 :::139 :::*
> >> LISTEN 27139/smbd
> >> udp 0 0 172.26.87.255:137 <http://172.26.87.255:137>
> >> 0.0.0.0:* 27094/nmbd
> >> udp 0 0 172.26.85.211:137 <http://172.26.85.211:137>
> >> 0.0.0.0:* 27094/nmbd
> >> udp 0 0 0.0.0.0:137 <http://0.0.0.0:137> 0.0.0.0:*
> >> 27094/nmbd
> >> udp 0 0 172.26.87.255:138 <http://172.26.87.255:138>
> >> 0.0.0.0:* 27094/nmbd
> >> udp 0 0 172.26.85.211:138 <http://172.26.85.211:138>
> >> 0.0.0.0:* 27094/nmbd
> >> udp 0 0 0.0.0.0:138 <http://0.0.0.0:138> 0.0.0.0:*
> >> 27094/nmbd
> >>
> >>
> >> [root at testcad16 samba]# smbclient -d 3 -L //testcad16
> >> lp_load_ex: refreshing parameters
> >> Initialising global parameters
> >> rlimit_max: increasing rlimit_max (1024) to minimum Windows limit
> (16384)
> >> Processing section "[global]"
> >> added interface eth0 ip=172.26.85.211 bcast=172.26.87.255
> >> netmask=255.255.248.0
> >> Client started (version 4.2.5-SerNet-RedHat-19.el6).
> >> Enter root's password:
> >> Connecting to 172.26.85.211 at port 445
> >> session setup failed: NT_STATUS_LOGON_FAILURE
> >> My smb.conf setting is as followed,
> >>
> >> # Global parameters
> >> [global]
> >> workgroup = TESTSMB
> >> server string = Samba Server Version %v
> >> netbios name = testcad16
> >> security = USER
> >> passdb backend = tdbsam
> >> encrypt passwords = No
> >> client NTLMv2 auth = No
> >> client lanman auth = Yes
> >> client plaintext auth = Yes
> >> dns proxy = No
> >> idmap config * : backend = tdb
> >> hosts allow = 127. 172.26.
> >> cups options = raw
> >>
> >>
> >> [homes]
> >> comment = Home Directories
> >> read only = No
> >> browseable = No
> >>
> >>
> >> [printers]
> >> comment = All Printers
> >> path = /var/spool/samba
> >> printable = Yes
> >> print ok = Yes
> >> browseable = No
> >>
> >>
> >>
> >>
> > OK, you seem to be trying to set up a standalone server, you do realise
> > that you will need to create your users on this as well as on the windows
> > machines.
> >
>
> yes, but I hope samba can use NIS authentication instead of using it's own
> database.
> Do I need to use smbpasswd to create user accounts again? It's against what
> I need...
>
>
> >
> > You might as well remove these lines, they are the defaults:
> >
> > security = USER
> > passdb backend = tdbsam
> >
>
> Don't I need to set the security level?
>
> >
> > You might as well remove this line, it isn't needed on a standalone
> server:
> >
> > idmap config * : backend = tdb
> >
>
> I didn't set these parameters. They are reported by testparm command.
> Where can I remove that?
>
> >
> > and you don't need to run the winbindd deamon.
> >
> > You really should remove these lines, you are trying to make windows do
> > something with passwords it really doesn't want to do:
> >
> > encrypt passwords = No
> > client NTLMv2 auth = No
> > client lanman auth = Yes
> > client plaintext auth = Yes
> >
> > Rowland
> >
>
> I searched some articles on the internet said I need to set above lines for
> the samba server and
> plaintextpasswords = 1 for windows due to different encrypted methods
> between windows and workstation.
> I added those lines and It seems worked for samba old version (3.6.23) .
> How come it wind up irrelevant for 4.2.5 version?
> Don't I need to set anything for this issue?
>
> I've been removed most of these lines you suggested, which means I nearly
> set nothing.
> but it still didn't work and I got the same message.
>
> [root at testcad16 samba]# smbclient -L //testcad16
> Enter root's password:
> session setup failed: NT_STATUS_LOGON_FAILURE
>
>
> Here is my smb.conf setting.
>
> [root at testcad16 samba]# testparm
> Load smb config files from /etc/samba/smb.conf
> rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
> Processing section "[homes]"
> Processing section "[printers]"
> Loaded services file OK.
> Server role: ROLE_STANDALONE
>
> Press enter to see a dump of your service definitions
>
> # Global parameters
> [global]
> workgroup = SMBTEST
> server string = Samba Server Version %v
> idmap config * : backend = tdb
> hosts allow = 127. 172.26.
> cups options = raw
>
>
> [homes]
> comment = Home Directories
> read only = No
> browseable = No
>
>
> [printers]
> comment = All Printers
> path = /var/spool/samba
> printable = Yes
> print ok = Yes
> browseable = No
>
>
> Regards,
> Roger
>
>
> >
>
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions: https://lists.samba.org/mailman/options/samba
> >
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: https://lists.samba.org/mailman/options/samba
>
More information about the samba
mailing list