[Samba] session setup failed: NT_STATUS_LOGON_FAILURE
Roger Wu
wu1004 at gmail.com
Wed Nov 4 06:24:10 UTC 2015
Hi, Rowland,
Thanks for your advise. I've been updated the version to 4.2.5, the rpm
query is as below,
but it still didn't work.
[root at testcad16 samba]# rpm -qa | grep samba
sernet-samba-4.2.5-19.el6.x86_64
sernet-samba-libs-4.2.5-19.el6.x86_64
sernet-samba-libsmbclient0-4.2.5-19.el6.x86_64
sernet-samba-client-4.2.5-19.el6.x86_64
sernet-samba-common-4.2.5-19.el6.x86_64
[root at testcad16 samba]# netstat -tulnp| grep mbd
tcp 0 0 0.0.0.0:445 0.0.0.0:*
LISTEN 27139/smbd
tcp 0 0 0.0.0.0:139 0.0.0.0:*
LISTEN 27139/smbd
tcp 0 0 :::445 :::*
LISTEN 27139/smbd
tcp 0 0 :::139 :::*
LISTEN 27139/smbd
udp 0 0 172.26.87.255:137 0.0.0.0:*
27094/nmbd
udp 0 0 172.26.85.211:137 0.0.0.0:*
27094/nmbd
udp 0 0 0.0.0.0:137 0.0.0.0:*
27094/nmbd
udp 0 0 172.26.87.255:138 0.0.0.0:*
27094/nmbd
udp 0 0 172.26.85.211:138 0.0.0.0:*
27094/nmbd
udp 0 0 0.0.0.0:138 0.0.0.0:*
27094/nmbd
[root at testcad16 samba]# smbclient -d 3 -L //testcad16
lp_load_ex: refreshing parameters
Initialising global parameters
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Processing section "[global]"
added interface eth0 ip=172.26.85.211 bcast=172.26.87.255
netmask=255.255.248.0
Client started (version 4.2.5-SerNet-RedHat-19.el6).
Enter root's password:
Connecting to 172.26.85.211 at port 445
session setup failed: NT_STATUS_LOGON_FAILURE
My smb.conf setting is as followed,
# Global parameters
[global]
workgroup = TESTSMB
server string = Samba Server Version %v
netbios name = testcad16
security = USER
passdb backend = tdbsam
encrypt passwords = No
client NTLMv2 auth = No
client lanman auth = Yes
client plaintext auth = Yes
dns proxy = No
idmap config * : backend = tdb
hosts allow = 127. 172.26.
cups options = raw
[homes]
comment = Home Directories
read only = No
browseable = No
[printers]
comment = All Printers
path = /var/spool/samba
printable = Yes
print ok = Yes
browseable = No
2015-11-03 22:54 GMT+08:00 Rowland Penny <rowlandpenny241155 at gmail.com>:
> On 03/11/15 14:08, Roger Wu wrote:
>
>> Hi,
>>
>> I installed samba 4.0.0rc4 with CentOS 6.7.
>> I'm now trying to setup samba server using NIS authentication and access
>> from Windows 7,
>> but I hit one question I don't know how to deal with.
>> After starting service, I tried the following command, but got an error
>> message
>>
>> [root at testcad16 samba]# smbclient -L //testcad16
>> Enter root's password:
>> session setup failed: NT_STATUS_LOGON_FAILURE
>>
>> I looked into log.nmbd and log.smbd, the following messages were showed up
>> as below,
>>
>> [root at testcad16 samba]# tail -20 log.nmbd
>> [2015/11/03 10:04:48, 0] ../source3/nmbd/nmbd.c:883(main)
>> nmbd version 4.0.0rc4 started.
>> Copyright Andrew Tridgell and the Samba Team 1992-2012
>> [2015/11/03 10:04:48, 0] ../source3/nmbd/nmbd.c:922(main)
>> standard input is not a socket, assuming -D option
>>
>> [root at testcad16 samba]# tail -20 log.smbd
>> [2015/11/03 10:04:44, 0] ../source3/smbd/server.c:1200(main)
>> smbd version 4.0.0rc4 started.
>> Copyright Andrew Tridgell and the Samba Team 1992-2012
>> [2015/11/03 10:04:44.577027, 0] ../source3/smbd/server.c:1280(main)
>> standard input is not a socket, assuming -D option
>>
>> Then I gave the following command, but I had no idea how to debug.
>>
>> [root at testcad16 samba]# smbclient -d3 -L //testcad16
>> lp_load_ex: refreshing parameters
>> Initialising global parameters
>> rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
>> params.c:pm_process() - Processing configuration file
>> "/etc/samba/smb.conf"
>> Processing section "[global]"
>> added interface eth0 ip=fe80::20c:29ff:fe2a:2d99%eth0
>> bcast=fe80::ffff:ffff:ffff:ffff%eth0 netmask=ffff:ffff:ffff:ffff::
>> added interface eth0 ip=172.26.85.211 bcast=172.26.87.255
>> netmask=255.255.248.0
>> Client started (version 4.0.0rc4).
>> Enter root's password:
>> Connecting to 172.26.85.211 at port 445
>> session setup failed: NT_STATUS_LOGON_FAILURE
>>
>> My smb.conf setting is as below,
>> [global]
>> workgroup = TESTSMB
>> server string = Samba Server Version %v
>> netbios name = testcad16
>> encrypt passwords = No
>> client NTLMv2 auth = No
>> client lanman auth = Yes
>> client plaintext auth = Yes
>> security = user
>> passdb backend = tdbsam
>> dns proxy = No
>> idmap config * : backend = tdb
>> hosts allow = 127., 172.26.
>> cups options = raw
>>
>> [homes]
>> comment = Home Directories
>> read only = No
>> browseable = No
>>
>> [printers]
>> comment = All Printers
>> path = /var/spool/samba
>> printable = Yes
>> print ok = Yes
>> browseable = No
>>
>> For more information,
>>
>> [root at testcad16 samba]# rpm -qa | grep samba
>> samba4-4.0.0-66.el6_6.rc4.x86_64
>> samba4-libs-4.0.0-66.el6_6.rc4.x86_64
>> samba4-winbind-4.0.0-66.el6_6.rc4.x86_64
>> samba4-client-4.0.0-66.el6_6.rc4.x86_64
>> samba4-common-4.0.0-66.el6_6.rc4.x86_64
>>
>> [root at testcad16 samba]# netstat -tulnp | grep mbd
>> tcp 0 0 0.0.0.0:445 0.0.0.0:*
>> LISTEN 19363/smbd
>> tcp 0 0 0.0.0.0:139 0.0.0.0:*
>> LISTEN 19363/smbd
>> tcp 0 0 :::445 :::*
>> LISTEN 19363/smbd
>> tcp 0 0 :::139 :::*
>> LISTEN 19363/smbd
>> udp 0 0 172.26.87.255:137 0.0.0.0:*
>> 19382/nmbd
>> udp 0 0 172.26.85.211:137 0.0.0.0:*
>> 19382/nmbd
>> udp 0 0 0.0.0.0:137 0.0.0.0:*
>> 19382/nmbd
>> udp 0 0 172.26.87.255:138 0.0.0.0:*
>> 19382/nmbd
>> udp 0 0 172.26.85.211:138 0.0.0.0:*
>> 19382/nmbd
>> udp 0 0 0.0.0.0:138 0.0.0.0:*
>> 19382/nmbd
>>
>>
>> Regards,
>>
>
> Is there any way you can use a later version of samba ? i.e. by using the
> Sernet packages:
>
> https://portal.enterprisesamba.com/
>
> Version 4.0.x is EOL and a later version may contain the fix for your
> problem.
>
> Rowland
>
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: https://lists.samba.org/mailman/options/samba
>
More information about the samba
mailing list