[Samba] is WMI through RSAT supported?

[Daniel Carrasco Marín]

Thanks, i'll try to check if works, but i've the firewall disabled. Is a
problem because sometimes the GPO fails, and if i've to install RSAT on
every client machine to see the GPO status... For example, now i've
problems with drives map on a machine: one user is failing and drives are
not mapped. Other users in that machine works fine, and that user in
another machine works too, then is a problem with that user and that
machine. I need the RSAT to check that.

Greetings!!

2015-05-18 21:32 GMT+02:00 James <lingpanda101 at gmail.com>:

> On 5/18/2015 11:54 AM, Daniel Carrasco Marín wrote:
> > Hi, i'm trying to get GPO result info from a remote computer but i get an
> > error "RPC server is not avaible".
> > Is supported by samba 4.2.1?
> >
> > if i try to get the same info from local is working, and i've checked the
> > WMI security on remote computer and is OK.
> >
> > Thanks!!
> I dug a bit further and ran WMI Diagnosis Utility -- Version 2.2 on the
> machine giving this error. It gave me the following result.
>
> Windows Firewall 'Windows Management Instrumentation (WMI)' group rule:
> ............................................. DISABLED.
> 31210 15:26:16 (0) ** => This will prevent any WMI remote connectivity
> to/from this machine.
> 31211 15:26:16 (0) **    - You can adjust the configuration by executing
> the following command:
> 31212 15:26:16 (0) **    i.e. 'NETSH.EXE ADVFIREWALL FIREWALL SET RULE
> GROUP="Windows Management Instrumentation (WMI)" NEW ENABLE=YES'
> 31213 15:26:16 (0) ** Note: With this command all inbound and outbound
> WMI rules are activated at once!
> 31214 15:26:16 (0) **       You can also enable each individual rule
> instead of activating the group rule.
>
>
> Running this command fixed my issue.
>
>
>
> --
> -James
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
>