[Samba] Samba 4.1 gentent, ls, no display domain user name on Primary ACDC but wbinfo -u yes
Jhon P
patocius at hotmail.com
Fri Mar 20 15:19:56 MDT 2015
Im think not provisioned with provisioned with '--use-rfc2307'
root at proteus:~# ldbsearch -H /usr/local/samba/private/sam.ldb -b 'dc=kennedy,dc=edu' -s sub '(objectclass=msSFU30DomainInfo)'
GENSEC backend 'gssapi_spnego' registered
GENSEC backend 'gssapi_krb5' registered
GENSEC backend 'gssapi_krb5_sasl' registered
GENSEC backend 'schannel' registered
GENSEC backend 'spnego' registered
GENSEC backend 'ntlmssp' registered
GENSEC backend 'krb5' registered
GENSEC backend 'fake_gssapi_krb5' registered
# Referral
ref: ldap://kennedy.edu/CN=Configuration,DC=kennedy,DC=edu
# Referral
ref: ldap://kennedy.edu/DC=DomainDnsZones,DC=kennedy,DC=edu
# Referral
ref: ldap://kennedy.edu/DC=ForestDnsZones,DC=kennedy,DC=edu
# returned 3 records
# 0 entries
# 3 referrals
> Date: Fri, 20 Mar 2015 20:55:24 +0000
> From: rowlandpenny at googlemail.com
> To: samba at lists.samba.org
> Subject: Re: [Samba] Samba 4.1 gentent, ls, no display domain user name on Primary ACDC but wbinfo -u yes
>
> On 20/03/15 20:39, Jhon P wrote:
> > OK, i try removing this block, and add the line.
> > Restart samba but nothing happends.
> >
> >
> > > Date: Fri, 20 Mar 2015 20:01:04 +0000
> > > From: rowlandpenny at googlemail.com
> > > To: samba at lists.samba.org
> > > Subject: Re: [Samba] Samba 4.1 gentent, ls, no display domain user
> > name on Primary ACDC but wbinfo -u yes
> > >
> > > On 20/03/15 19:47, Jhon P wrote:
> > > >
> > > >
> > > > Yes im have a file:
> > > >
> > > > -rw-r--r-- 1 root root 19K Jan 10 2014 libnss_winbind.so.2
> > > >
> > > > My pam:
> > > > PAM profiles to enable:
> > > > │ [*] Unix authentication
> > > > │ [*] Winbind NT/Active Directory authentication
> > > > │ [ ] ConsoleKit Session Management
> > > > │ [ ] Inheritable Capabilities Management
> > > >
> > > >
> > > >> Date: Fri, 20 Mar 2015 18:21:57 +0000
> > > >> From: rowlandpenny at googlemail.com
> > > >> To: samba at lists.samba.org
> > > >> Subject: Re: [Samba] Samba 4.1 gentent, ls, no display domain
> > user name on Primary ACDC but wbinfo -u yes
> > > >>
> > > >> On 20/03/15 17:32, Jhon P wrote:
> > > >>> I install samba 4.1 from
> > > >>> the sources. In Debian 7.0 "wheezy"
> > > >>> a year ago.
> > > >>>
> > > >>>
> > > >>>
> > > >>>
> > > >>>
> > > >>> Thanks for responding.
> > > >>>
> > > >>>
> > > >>>
> > > >>>
> > > >>> From: patocius at hotmail.com
> > > >>> To: rowlandpenny at googlemail.com
> > > >>> Subject: RE: [Samba] Samba 4.1 gentent, ls, no display domain
> > user name on Primary ACDC but wbinfo -u yes
> > > >>> Date: Fri, 20 Mar 2015 17:28:05 +0000
> > > >>>
> > > >>>
> > > >>>
> > > >>>
> > > >>> I install samba 4.1 from the sources. In Debian 7.0 "wheezy" a
> > year ago.
> > > >>>
> > > >>> Thanks for responding.
> > > >>>
> > > >>> Patocius
> > > >>>
> > > >>>> Date: Fri, 20 Mar 2015 17:15:50 +0000
> > > >>>> From: rowlandpenny at googlemail.com
> > > >>>> To: samba at lists.samba.org
> > > >>>> Subject: Re: [Samba] Samba 4.1 gentent, ls, no display domain
> > user name on Primary ACDC but wbinfo -u yes
> > > >>>>
> > > >>>> On 20/03/15 16:58, Jhon P wrote:
> > > >>>>> Hello friends:
> > > >>>>>
> > > >>>>> I hope you can help me with this I'm struggling a year ago
> > > >>>>> After breaking my head migrating a server with Samba Samba 2.1
> > to 4.1 all stay perfect and functional.
> > > >>>>>
> > > >>>>> All files are in this domain controller for now, and then be
> > moved to a domain member, "the file server".
> > > >>>>>
> > > >>>>> I configure the server as ADDC Samba 4.1 and up here all went
> > well, the shares, the users, winbind, NetLogons, machines, etc.But
> > > >>>>>
> > > >>>>> When I have to use the "ls" on the terminal display UID
> > command instead of domain user name.
> > > >>>>>
> > > >>>>> -rwxrwx --- 1 root users 100K February 28, 2012 protocolo.pdf
> > > >>>>> --- 1 root users -rwxrwx 21K June 27, 2013 proyecto.doc
> > > >>>>> --- 1 root users -rwxrwx 21K June 21, 2013 Project 3º.doc
> > > >>>>> drwxrwxr-x 2 3000085 4.0K users Mar 17 12:59 PROYECTO.txt
> > > >>>>> -rwxrwxr-- 1 3000085 28K users Mar 12 12:11 segundo.doc Project
> > > >>>>> --- 1 root users -rwxrwx 96K July 22, 2013 recomendaciones.cls
> > > >>>>>
> > > >>>>> If I run the "gentent" command only shows me posix users.
> > > >>>>>
> > > >>>>> Example:
> > > >>>>>
> > > >>>>> daemon: x: 1: 1: daemon: / usr / sbin: / bin / sh
> > > >>>>> bin: x: 2: 2: bin: / bin: / bin / sh
> > > >>>>> sys: x: 3: 3: sys: / dev: / bin / sh
> > > >>>>> sync: x: 4: 65534: sync: / bin: / bin / sync
> > > >>>>> ...
> > > >>>>>
> > > >>>>> But if I do, "wbinfo -u"
> > > >>>>>
> > > >>>>> cupcakes
> > > >>>>> claudiap
> > > >>>>> johanao
> > > >>>>> agustinap
> > > >>>>> gabrielaa
> > > >>>>> ....
> > > >>>>>
> > > >>>>> My nsswitch.conf
> > > >>>>>
> > > >>>>> # /etc/nsswitch.conf
> > > >>>>> #
> > > >>>>> # Example configuration of GNU Name Service Switch functionality.
> > > >>>>> # If you have the `glibc-doc-reference' and `info' packages
> > installed, try:
> > > >>>>> # `info libc "Name Service Switch"' for information about this
> > file.
> > > >>>>>
> > > >>>>> passwd: compat winbind
> > > >>>>> group: compat winbind
> > > >>>>> shadow: compat
> > > >>>>>
> > > >>>>> hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4
> > > >>>>> networks: files
> > > >>>>>
> > > >>>>> protocols: db files
> > > >>>>> services: db files
> > > >>>>> ethers: db files
> > > >>>>> rpc: db files
> > > >>>>>
> > > >>>>> netgroup: nis
> > > >>>>>
> > > >>>>> My smb.conf
> > > >>>>>
> > > >>>>> [global]
> > > >>>>> workgroup = PROTEUS
> > > >>>>> realm = proteus.local
> > > >>>>> netbios name = HARDCORE
> > > >>>>> server role = active directory domain controller
> > > >>>>> dns forwarder = 200.40.220.245
> > > >>>>> allow dns updates = nonsecure and secure
> > > >>>>> server services = rpc, nbt, wrepl, ldap, cldap, kdc, drepl,
> > winbind, ntp_signd, kcc, dnsupdate, dns, smb
> > > >>>>> dcerpc endpoint servers = epmapper, wkssvc, rpcecho, samr,
> > netlogon, lsarpc, spoolss, drsuapi, dssetup, unixinfo, browser,
> > eventlog6, backupkey, dnsserver, winreg, srvsvc
> > > >>>>> winbind enum users = yes
> > > >>>>> winbind enum groups = yes
> > > >>>>> winbind use default domain = yes
> > > >>>>> winbind nested groups = yes
> > > >>>>> log level = 3
> > > >>>>> log file = /var/log/samba/samba.log
> > > >>>>> # unix charset = ISO8859-1
> > > >>>>>
> > > >>>>>
> > > >>>>> I appreciate any help you can give me
> > > >>>>>
> > > >>>>> Regards.
> > > >>>>>
> > > >>>> How did you install samba4, did you compile it yourself or was
> > it from
> > > >>>> packages and on what OS.
> > > >>>>
> > > >>>> If you did compile it yourself, there is a couple of links that
> > will
> > > >>>> need creating and your users & groups will need to have
> > uidNumbers &
> > > >>>> gidNumbers.
> > > >>>>
> > > >>>> Rowland
> > > >>>> --
> > > >>>> To unsubscribe from this list go to the following URL and read the
> > > >>>> instructions: https://lists.samba.org/mailman/options/samba
> > > >>>
> > > >> OK, have you got a link (or a file)
> > > >> /lib/x86_64-linux-gnu/libnss_winbind.so.2 ?
> > > >>
> > > >> What does 'pam-auth-update' show ?
> > > >>
> > > >> Rowland
> > > >>
> > > >> --
> > > >> To unsubscribe from this list go to the following URL and read the
> > > >> instructions: https://lists.samba.org/mailman/options/samba
> > > >
> > >
> > > OK, try removing this block from smb.conf on the DC:
> > >
> > > Winbind enum users = yes
> > > Winbind enum groups = yes
> > > Winbind use default domain = yes
> > > Winbind nested groups = yes
> > >
> > > Add:
> > >
> > > idmap_ldb:use rfc2307 = yes
> > >
> > > Rowland
> > >
> > > --
> > > To unsubscribe from this list go to the following URL and read the
> > > instructions: https://lists.samba.org/mailman/options/samba
>
> can you remember if you provisioned with '--use-rfc2307' ?
>
> If unsure, you can find out if the required schema extension is
> installed with:
>
> ldbsearch -H /usr/local/samba/private/sam.ldb -b 'dc=example,dc=com' -s
> sub '(objectclass=msSFU30DomainInfo)'
>
> This relies on ldb-tools being installed normally, but as you compiled
> samba yourself it should be available
>
> Rowland
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: https://lists.samba.org/mailman/options/samba
More information about the samba
mailing list