[Samba] Update
sandy.napoles at eccmg.cupet.cu
sandy.napoles at eccmg.cupet.cu
Mon Mar 2 10:33:32 MST 2015
I do not understand that you say me????
> Any reason you are not using the git protocol?
>
> git://git.samba.org
>
> David
> ------------------------------------------------------------------------
> Dr David Holder CEng FIET MIEEE
>
> Erion Ltd, An Cala, Inverkirkaig, Lochinver, Sutherland, IV27 4LR, UK
>
> Reception: +44 (0)1422 207000
>
> Direct Dial: +44 (0)131 2026317
>
> http://www.erion.co.uk
>
>
> Registered in England and Wales. Registered Number 3521142
> Registered Office: Newtons, 49 Coniscliffe Road, Darlington, County
> Durham, DL3 7EH, UK
> VAT Number: GB 698 3633 78
>
> On 02/03/2015 17:29, David Holder wrote:
>> Perfect thanks. Do you have a web proxy in your network? That would
>> explain this sequence of events.
>> ------------------------------------------------------------------------
>> Dr David Holder CEng FIET MIEEE
>>
>> Erion Ltd, An Cala, Inverkirkaig, Lochinver, Sutherland, IV27 4LR, UK
>>
>> Reception: +44 (0)1422 207000
>>
>> Direct Dial: +44 (0)131 2026317
>>
>> http://www.erion.co.uk
>>
>>
>> Registered in England and Wales. Registered Number 3521142
>> Registered Office: Newtons, 49 Coniscliffe Road, Darlington, County
>> Durham, DL3 7EH, UK
>> VAT Number: GB 698 3633 78
>>
>> On 02/03/2015 17:13, sandy.napoles at eccmg.cupet.cu wrote:
>>> I can see the link http://git.samba.org/ perfect
>>>
>>> but.....
>>> telnet git.samba.org 80
>>> Trying 193.175.80.230...
>>> Trying 2001:638:603:d06e::80:230...
>>> telnet: Unable to connect to remote host: Network is unreachable
>>>
>>> And I do not have any firewall.....
>>>
>>>
>>>> Try
>>>>
>>>> lynx http://git.samba.org/
>>>>
>>>> Or indeed
>>>>
>>>> telnet git.samba.org 80
>>>> GET / HTTP/1.0
>>>>
>>>>
>>>> OR
>>>>
>>>> telnet6 git.samba.org 80
>>>> GET / HTTP/1.0
>>>>
>>>>
>>>> There are blank lines after the GETs.
>>>>
>>>> These will show if you have connectivity over HTTP to the Samba git
>>>> repository over v4 and/or v6.
>>>>
>>>> David
>>>> ------------------------------------------------------------------------
>>>>
>>>> Dr David Holder CEng FIET MIEEE
>>>>
>>>> Erion Ltd, An Cala, Inverkirkaig, Lochinver, Sutherland, IV27 4LR, UK
>>>>
>>>> Reception: +44 (0)1422 207000
>>>>
>>>> Direct Dial: +44 (0)131 2026317
>>>>
>>>> http://www.erion.co.uk
>>>>
>>>>
>>>> Registered in England and Wales. Registered Number 3521142
>>>> Registered Office: Newtons, 49 Coniscliffe Road, Darlington, County
>>>> Durham, DL3 7EH, UK
>>>> VAT Number: GB 698 3633 78
>>>>
>>>> On 02/03/2015 16:45, sandy.napoles at eccmg.cupet.cu wrote:
>>>>> root at samba:/home/samba-master# git pull
>>>>> error: Failed to connect to 2001:638:603:d06e::80:230: Network is
>>>>> unreachable while accessing http://git.samba.org/samba.git/info/refs
>>>>> fatal: HTTP request failed
>>>>> root at samba:/home/samba-master#
>>>>>
>>>>>
>>>>>
>>>>>> On 02/03/15 16:21, sandy.napoles at eccmg.cupet.cu wrote:
>>>>>>> My OS is Debian 7 and I only writte git pull
>>>>>>>
>>>>>>>> On 02/03/15 15:05, sandy.napoles at eccmg.cupet.cu wrote:
>>>>>>>>> ifconfig -a
>>>>>>>>> eth0 Link encap:Ethernet HWaddr 00:0c:29:82:ec:80
>>>>>>>>> inet addr:172.18.68.8 Bcast:172.18.68.31
>>>>>>>>> Mask:255.255.255.224
>>>>>>>>> inet6 addr: fe80::20c:29ff:fe82:ec80/64 Scope:Link
>>>>>>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>>>>>>> RX packets:107940 errors:0 dropped:0 overruns:0
>>>>>>>>> frame:0
>>>>>>>>> TX packets:109315 errors:0 dropped:0 overruns:0
>>>>>>>>> carrier:0
>>>>>>>>> collisions:0 txqueuelen:1000
>>>>>>>>> RX bytes:14394078 (13.7 MiB) TX bytes:20253880
>>>>>>>>> (19.3
>>>>>>>>> MiB)
>>>>>>>>>
>>>>>>>>> lo Link encap:Local Loopback
>>>>>>>>> inet addr:127.0.0.1 Mask:255.0.0.0
>>>>>>>>> inet6 addr: ::1/128 Scope:Host
>>>>>>>>> UP LOOPBACK RUNNING MTU:16436 Metric:1
>>>>>>>>> RX packets:252 errors:0 dropped:0 overruns:0
>>>>>>>>> frame:0
>>>>>>>>> TX packets:252 errors:0 dropped:0 overruns:0
>>>>>>>>> carrier:0
>>>>>>>>> collisions:0 txqueuelen:0
>>>>>>>>> RX bytes:38555 (37.6 KiB) TX bytes:38555 (37.6
>>>>>>>>> KiB)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ip -f inet6 route
>>>>>>>>> fe80::/64 dev eth0 proto kernel metric 256
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>> Thanks. No other interfaces (ifconfig -a)?
>>>>>>>>>>
>>>>>>>>>> Also output of
>>>>>>>>>>
>>>>>>>>>> ip -f inet6 route
>>>>>>>>>>
>>>>>>>>>> would be useful.
>>>>>>>>>>
>>>>>>>>>> David
>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>
>>>>>>>>>> Dr David Holder CEng FIET MIEEE
>>>>>>>>>>
>>>>>>>>>> Erion Ltd, An Cala, Inverkirkaig, Lochinver, Sutherland, IV27
>>>>>>>>>> 4LR,
>>>>>>>>>> UK
>>>>>>>>>>
>>>>>>>>>> Reception: +44 (0)1422 207000
>>>>>>>>>>
>>>>>>>>>> Direct Dial: +44 (0)131 2026317
>>>>>>>>>>
>>>>>>>>>> http://www.erion.co.uk
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Registered in England and Wales. Registered Number 3521142
>>>>>>>>>> Registered Office: Newtons, 49 Coniscliffe Road, Darlington,
>>>>>>>>>> County
>>>>>>>>>> Durham, DL3 7EH, UK
>>>>>>>>>> VAT Number: GB 698 3633 78
>>>>>>>>>>
>>>>>>>>>> On 02/03/2015 14:26, sandy.napoles at eccmg.cupet.cu wrote:
>>>>>>>>>>> in /etc/gai.conf all is coment
>>>>>>>>>>>
>>>>>>>>>>>> Hi Sandy,
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks! Curious. Do you have any other interfaces? ifconfig -a
>>>>>>>>>>>> should
>>>>>>>>>>>> show them all including loopback.
>>>>>>>>>>>>
>>>>>>>>>>>> What is puzzling me is that it should not even attempt to use
>>>>>>>>>>>> IPv6
>>>>>>>>>>>> to
>>>>>>>>>>>> reach a global address when it only has a link-local
>>>>>>>>>>>> address. It
>>>>>>>>>>>> should
>>>>>>>>>>>> gracefully fall back to IPv4 (as per RFC 6724 or RFC 3484
>>>>>>>>>>>> depending
>>>>>>>>>>>> on
>>>>>>>>>>>> the kernel version). Since you have an IPv4 address and I
>>>>>>>>>>>> assume
>>>>>>>>>>>> an
>>>>>>>>>>>> IPv4
>>>>>>>>>>>> connection, then this should work over IPv4.
>>>>>>>>>>>>
>>>>>>>>>>>> I'm assume that you do not have an /etc/gai.conf file
>>>>>>>>>>>> installed?
>>>>>>>>>>>>
>>>>>>>>>>>> David
>>>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>>>
>>>>>>>>>>>> Dr David Holder CEng FIET MIEEE
>>>>>>>>>>>>
>>>>>>>>>>>> Erion Ltd, An Cala, Inverkirkaig, Lochinver, Sutherland, IV27
>>>>>>>>>>>> 4LR,
>>>>>>>>>>>> UK
>>>>>>>>>>>>
>>>>>>>>>>>> Reception: +44 (0)1422 207000
>>>>>>>>>>>>
>>>>>>>>>>>> Direct Dial: +44 (0)131 2026317
>>>>>>>>>>>>
>>>>>>>>>>>> http://www.erion.co.uk
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Registered in England and Wales. Registered Number 3521142
>>>>>>>>>>>> Registered Office: Newtons, 49 Coniscliffe Road, Darlington,
>>>>>>>>>>>> County
>>>>>>>>>>>> Durham, DL3 7EH, UK
>>>>>>>>>>>> VAT Number: GB 698 3633 78
>>>>>>>>>>>>
>>>>>>>>>>>> On 02/03/2015 13:10, sandy.napoles at eccmg.cupet.cu wrote:
>>>>>>>>>>>>> eth0 Link encap:Ethernet HWaddr d0:27:88:64:e4:01
>>>>>>>>>>>>> inet addr:172.18.70.100 Mask:255.255.255.224
>>>>>>>>>>>>> inet6 addr: fe80::d227:88ff:fe64:e401/64
>>>>>>>>>>>>> Scope:Link
>>>>>>>>>>>>> UP BROADCAST RUNNING MULTICAST MTU:1500
>>>>>>>>>>>>> Metric:1
>>>>>>>>>>>>> RX packets:1413908 errors:0 dropped:0
>>>>>>>>>>>>> overruns:0
>>>>>>>>>>>>> frame:0
>>>>>>>>>>>>> TX packets:447039 errors:0 dropped:0
>>>>>>>>>>>>> overruns:0
>>>>>>>>>>>>> carrier:0
>>>>>>>>>>>>> collisions:0 txqueuelen:1000
>>>>>>>>>>>>> RX bytes:1693689457 (1.5 GiB) TX
>>>>>>>>>>>>> bytes:52974612
>>>>>>>>>>>>> (50.5
>>>>>>>>>>>>> MiB)
>>>>>>>>>>>>> Interrupt:43 Base address:0xc000
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> traceroute6 git.samba.org
>>>>>>>>>>>>> traceroute to git.samba.org (2001:638:603:d06e::80:230), 30
>>>>>>>>>>>>> hops
>>>>>>>>>>>>> max,
>>>>>>>>>>>>> 80
>>>>>>>>>>>>> byte packets
>>>>>>>>>>>>> connect: Network is unreachable
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi Sandy,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Please can you provide the output from an *i**fconfig -a*
>>>>>>>>>>>>>> command?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> This should give an idea of what is going on. Turning off
>>>>>>>>>>>>>> IPv6
>>>>>>>>>>>>>> will
>>>>>>>>>>>>>> not
>>>>>>>>>>>>>> be necessary if you can find the actual cause of the
>>>>>>>>>>>>>> problem.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> You would not get this error message if you only have a link
>>>>>>>>>>>>>> local
>>>>>>>>>>>>>> address configured on your interface. You must have some
>>>>>>>>>>>>>> form
>>>>>>>>>>>>>> of
>>>>>>>>>>>>>> global
>>>>>>>>>>>>>> address.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Also, the IPv6 address is that of git.samba.org not
>>>>>>>>>>>>>> samba.org.
>>>>>>>>>>>>>> You
>>>>>>>>>>>>>> could
>>>>>>>>>>>>>> try:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *traceroute6 git.samba.org.*
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Best Regards,
>>>>>>>>>>>>>> David
>>>>>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Dr David Holder CEng FIET MIEEE
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Erion Ltd, An Cala, Inverkirkaig, Lochinver, Sutherland,
>>>>>>>>>>>>>> IV27
>>>>>>>>>>>>>> 4LR,
>>>>>>>>>>>>>> UK
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Reception: +44 (0)1422 207000
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Direct Dial: +44 (0)131 2026317
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> http://www.erion.co.uk
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Registered in England and Wales. Registered Number 3521142
>>>>>>>>>>>>>> Registered Office: Newtons, 49 Coniscliffe Road, Darlington,
>>>>>>>>>>>>>> County
>>>>>>>>>>>>>> Durham, DL3 7EH, UK
>>>>>>>>>>>>>> VAT Number: GB 698 3633 78
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On 28/02/2015 18:38, Reindl Harald wrote:
>>>>>>>>>>>>>>> Am 28.02.2015 um 19:13 schrieb
>>>>>>>>>>>>>>> sandy.napoles at eccmg.cupet.cu:
>>>>>>>>>>>>>>>> I do not working with ipv6, I have disable, but I have the
>>>>>>>>>>>>>>>> same
>>>>>>>>>>>>>>>> error,
>>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>>> can read in internet that this ipv6 ip
>>>>>>>>>>>>>>>> 2001:638:603:d06e::80:230:
>>>>>>>>>>>>>>>> belong
>>>>>>>>>>>>>>>> to url samba.org....
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> If I try to connect to this url using some navegator I
>>>>>>>>>>>>>>>> connected
>>>>>>>>>>>>>>>> perfect....but when I run git pull using command line I
>>>>>>>>>>>>>>>> can
>>>>>>>>>>>>>>>> not
>>>>>>>>>>>>>>>> connect..
>>>>>>>>>>>>>>> the question is *how* did you disable ipv6 - when ifconfig
>>>>>>>>>>>>>>> shows
>>>>>>>>>>>>>>> a
>>>>>>>>>>>>>>> "link local" ipv6 address the stack is *not* entirely
>>>>>>>>>>>>>>> disabled
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> [root at srv-rhsoft:~]$ ifconfig eth0
>>>>>>>>>>>>>>> eth0: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST>
>>>>>>>>>>>>>>> mtu
>>>>>>>>>>>>>>> 1500
>>>>>>>>>>>>>>> ether 24:be:05:1a:c0:27 txqueuelen 100
>>>>>>>>>>>>>>> (Ethernet)
>>>>>>>>>>>>>>> RX packets 2460 bytes 577531 (563.9 KiB)
>>>>>>>>>>>>>>> RX errors 0 dropped 0 overruns 0 frame 0
>>>>>>>>>>>>>>> TX packets 8722 bytes 1981928 (1.8 MiB)
>>>>>>>>>>>>>>> TX errors 0 dropped 0 overruns 0 carrier 0
>>>>>>>>>>>>>>> collisions 0
>>>>>>>>>>>>>>> device interrupt 20 memory
>>>>>>>>>>>>>>> 0xf7e00000-f7e20000
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Am 28.02.2015 um 15:37 schrieb
>>>>>>>>>>>>>>>>> sandy.napoles at eccmg.cupet.cu:
>>>>>>>>>>>>>>>>>> Hello list, Iam using samba4 as Domain Controller my
>>>>>>>>>>>>>>>>>> verion
>>>>>>>>>>>>>>>>>> Version
>>>>>>>>>>>>>>>>>> 4.3.0pre1-GIT-068f9e2, but I have a little problem when
>>>>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>>>>> going
>>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>>> update
>>>>>>>>>>>>>>>>>> using GIT PULL I have this error
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> error: Failed to connect to 2001:638:603:d06e::80:230:
>>>>>>>>>>>>>>>>>> Network
>>>>>>>>>>>>>>>>>> is
>>>>>>>>>>>>>>>>>> unreachable while accessing
>>>>>>>>>>>>>>>>>> http://git.samba.org/samba.git/info/refs
>>>>>>>>>>>>>>>>>> fatal: HTTP request failed
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> some body can helpme
>>>>>>>>>>>>>>>>> do you have working ipv6?
>>>>>>>>>>>>>>>>> if not disable it via sysctl.conf
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> net.ipv6.conf.all.disable_ipv6=1
>>>>>>>>>>>>>>>>> net.ipv6.conf.default.disable_ipv6=1
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> that above is most likely because the link-local
>>>>>>>>>>>>>>>>> address if
>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>> ipv6
>>>>>>>>>>>>>>>>> stack is enabled and some piece of software thinks it's
>>>>>>>>>>>>>>>>> useable
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> To unsubscribe from this list go to the following URL and
>>>>>>>>>>>>>>>>> read
>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>> instructions:
>>>>>>>>>>>>>>>>> https://lists.samba.org/mailman/options/samba
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> To unsubscribe from this list go to the following URL and
>>>>>>>>>>>>>> read
>>>>>>>>>>>>>> the
>>>>>>>>>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> To unsubscribe from this list go to the following URL and read
>>>>>>>>>>>> the
>>>>>>>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> To unsubscribe from this list go to the following URL and read
>>>>>>>>>> the
>>>>>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>>>>>
>>>>>>>> OK, nobody seems to have asked this yet, what OS and how are you
>>>>>>>> trying
>>>>>>>> to update git, just what are you typing into the terminal ?
>>>>>>>>
>>>>>>>> Rowland
>>>>>>>>
>>>>>>>> --
>>>>>>>> To unsubscribe from this list go to the following URL and read the
>>>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>>>
>>>>>> OK, so you cd into the samba directory that you previously built
>>>>>> samba4
>>>>>> in (presumably samba-master) and typed 'git pull'.
>>>>>>
>>>>>> If I do the same on my debian wheezy DC, I get this:
>>>>>>
>>>>>> root at dc01:~/samba-master# git pull
>>>>>> remote: Counting objects: 4622, done.
>>>>>> remote: Compressing objects: 100% (1904/1904), done.
>>>>>> remote: Total 3053 (delta 2436), reused 1373 (delta 1083)
>>>>>> Receiving objects: 100% (3053/3053), 554.51 KiB, done.
>>>>>> Resolving deltas: 100% (2436/2436), completed with 472 local
>>>>>> objects.
>>>>>> From git://git.samba.org/samba
>>>>>> 87c5795..e2ed224 master -> origin/master
>>>>>> 6e1ba4c..5f5a01e v3-6-stable -> origin/v3-6-stable
>>>>>> 3be3266..4395552 v4-0-stable -> origin/v4-0-stable
>>>>>> f9693a1..2722ad6 v4-0-test -> origin/v4-0-test
>>>>>> 1e682c3..492c673 v4-1-stable -> origin/v4-1-stable
>>>>>> c4e46cd..d2c9373 v4-1-test -> origin/v4-1-test
>>>>>> c88a4f4..6c9d254 v4-2-stable -> origin/v4-2-stable
>>>>>> 77d8786..f645571 v4-2-test -> origin/v4-2-test
>>>>>> * [new tag] samba-4.0.25 -> samba-4.0.25
>>>>>> * [new tag] samba-4.1.17 -> samba-4.1.17
>>>>>> * [new tag] samba-4.2.0rc5 -> samba-4.2.0rc5
>>>>>> From git://git.samba.org/samba
>>>>>> * [new tag] ldb-1.1.20 -> ldb-1.1.20
>>>>>> * [new tag] samba-3.6.25 -> samba-3.6.25
>>>>>> * [new tag] tevent-0.9.23 -> tevent-0.9.23
>>>>>> Updating 87c5795..e2ed224
>>>>>>
>>>>>> and so on
>>>>>>
>>>>>> So there must be a difference between your setup and mine, but
>>>>>> what ??
>>>>>>
>>>>>> Rowland
>>>>>>
>>>>>> --
>>>>>> To unsubscribe from this list go to the following URL and read the
>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>
>>>> --
>>>> To unsubscribe from this list go to the following URL and read the
>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>
>>>
>>
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: https://lists.samba.org/mailman/options/samba
>
More information about the samba
mailing list