[Samba] Update
David Holder
david.holder at erion.co.uk
Mon Mar 2 10:29:29 MST 2015
Perfect thanks. Do you have a web proxy in your network? That would
explain this sequence of events.
------------------------------------------------------------------------
Dr David Holder CEng FIET MIEEE
Erion Ltd, An Cala, Inverkirkaig, Lochinver, Sutherland, IV27 4LR, UK
Reception: +44 (0)1422 207000
Direct Dial: +44 (0)131 2026317
http://www.erion.co.uk
Registered in England and Wales. Registered Number 3521142
Registered Office: Newtons, 49 Coniscliffe Road, Darlington, County
Durham, DL3 7EH, UK
VAT Number: GB 698 3633 78
On 02/03/2015 17:13, sandy.napoles at eccmg.cupet.cu wrote:
> I can see the link http://git.samba.org/ perfect
>
> but.....
> telnet git.samba.org 80
> Trying 193.175.80.230...
> Trying 2001:638:603:d06e::80:230...
> telnet: Unable to connect to remote host: Network is unreachable
>
> And I do not have any firewall.....
>
>
>> Try
>>
>> lynx http://git.samba.org/
>>
>> Or indeed
>>
>> telnet git.samba.org 80
>> GET / HTTP/1.0
>>
>>
>> OR
>>
>> telnet6 git.samba.org 80
>> GET / HTTP/1.0
>>
>>
>> There are blank lines after the GETs.
>>
>> These will show if you have connectivity over HTTP to the Samba git
>> repository over v4 and/or v6.
>>
>> David
>> ------------------------------------------------------------------------
>> Dr David Holder CEng FIET MIEEE
>>
>> Erion Ltd, An Cala, Inverkirkaig, Lochinver, Sutherland, IV27 4LR, UK
>>
>> Reception: +44 (0)1422 207000
>>
>> Direct Dial: +44 (0)131 2026317
>>
>> http://www.erion.co.uk
>>
>>
>> Registered in England and Wales. Registered Number 3521142
>> Registered Office: Newtons, 49 Coniscliffe Road, Darlington, County
>> Durham, DL3 7EH, UK
>> VAT Number: GB 698 3633 78
>>
>> On 02/03/2015 16:45, sandy.napoles at eccmg.cupet.cu wrote:
>>> root at samba:/home/samba-master# git pull
>>> error: Failed to connect to 2001:638:603:d06e::80:230: Network is
>>> unreachable while accessing http://git.samba.org/samba.git/info/refs
>>> fatal: HTTP request failed
>>> root at samba:/home/samba-master#
>>>
>>>
>>>
>>>> On 02/03/15 16:21, sandy.napoles at eccmg.cupet.cu wrote:
>>>>> My OS is Debian 7 and I only writte git pull
>>>>>
>>>>>> On 02/03/15 15:05, sandy.napoles at eccmg.cupet.cu wrote:
>>>>>>> ifconfig -a
>>>>>>> eth0 Link encap:Ethernet HWaddr 00:0c:29:82:ec:80
>>>>>>> inet addr:172.18.68.8 Bcast:172.18.68.31
>>>>>>> Mask:255.255.255.224
>>>>>>> inet6 addr: fe80::20c:29ff:fe82:ec80/64 Scope:Link
>>>>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>>>>> RX packets:107940 errors:0 dropped:0 overruns:0 frame:0
>>>>>>> TX packets:109315 errors:0 dropped:0 overruns:0
>>>>>>> carrier:0
>>>>>>> collisions:0 txqueuelen:1000
>>>>>>> RX bytes:14394078 (13.7 MiB) TX bytes:20253880 (19.3
>>>>>>> MiB)
>>>>>>>
>>>>>>> lo Link encap:Local Loopback
>>>>>>> inet addr:127.0.0.1 Mask:255.0.0.0
>>>>>>> inet6 addr: ::1/128 Scope:Host
>>>>>>> UP LOOPBACK RUNNING MTU:16436 Metric:1
>>>>>>> RX packets:252 errors:0 dropped:0 overruns:0 frame:0
>>>>>>> TX packets:252 errors:0 dropped:0 overruns:0 carrier:0
>>>>>>> collisions:0 txqueuelen:0
>>>>>>> RX bytes:38555 (37.6 KiB) TX bytes:38555 (37.6 KiB)
>>>>>>>
>>>>>>>
>>>>>>> ip -f inet6 route
>>>>>>> fe80::/64 dev eth0 proto kernel metric 256
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> Thanks. No other interfaces (ifconfig -a)?
>>>>>>>>
>>>>>>>> Also output of
>>>>>>>>
>>>>>>>> ip -f inet6 route
>>>>>>>>
>>>>>>>> would be useful.
>>>>>>>>
>>>>>>>> David
>>>>>>>> ------------------------------------------------------------------------
>>>>>>>> Dr David Holder CEng FIET MIEEE
>>>>>>>>
>>>>>>>> Erion Ltd, An Cala, Inverkirkaig, Lochinver, Sutherland, IV27 4LR,
>>>>>>>> UK
>>>>>>>>
>>>>>>>> Reception: +44 (0)1422 207000
>>>>>>>>
>>>>>>>> Direct Dial: +44 (0)131 2026317
>>>>>>>>
>>>>>>>> http://www.erion.co.uk
>>>>>>>>
>>>>>>>>
>>>>>>>> Registered in England and Wales. Registered Number 3521142
>>>>>>>> Registered Office: Newtons, 49 Coniscliffe Road, Darlington, County
>>>>>>>> Durham, DL3 7EH, UK
>>>>>>>> VAT Number: GB 698 3633 78
>>>>>>>>
>>>>>>>> On 02/03/2015 14:26, sandy.napoles at eccmg.cupet.cu wrote:
>>>>>>>>> in /etc/gai.conf all is coment
>>>>>>>>>
>>>>>>>>>> Hi Sandy,
>>>>>>>>>>
>>>>>>>>>> Thanks! Curious. Do you have any other interfaces? ifconfig -a
>>>>>>>>>> should
>>>>>>>>>> show them all including loopback.
>>>>>>>>>>
>>>>>>>>>> What is puzzling me is that it should not even attempt to use
>>>>>>>>>> IPv6
>>>>>>>>>> to
>>>>>>>>>> reach a global address when it only has a link-local address. It
>>>>>>>>>> should
>>>>>>>>>> gracefully fall back to IPv4 (as per RFC 6724 or RFC 3484
>>>>>>>>>> depending
>>>>>>>>>> on
>>>>>>>>>> the kernel version). Since you have an IPv4 address and I assume
>>>>>>>>>> an
>>>>>>>>>> IPv4
>>>>>>>>>> connection, then this should work over IPv4.
>>>>>>>>>>
>>>>>>>>>> I'm assume that you do not have an /etc/gai.conf file installed?
>>>>>>>>>>
>>>>>>>>>> David
>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>> Dr David Holder CEng FIET MIEEE
>>>>>>>>>>
>>>>>>>>>> Erion Ltd, An Cala, Inverkirkaig, Lochinver, Sutherland, IV27
>>>>>>>>>> 4LR,
>>>>>>>>>> UK
>>>>>>>>>>
>>>>>>>>>> Reception: +44 (0)1422 207000
>>>>>>>>>>
>>>>>>>>>> Direct Dial: +44 (0)131 2026317
>>>>>>>>>>
>>>>>>>>>> http://www.erion.co.uk
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Registered in England and Wales. Registered Number 3521142
>>>>>>>>>> Registered Office: Newtons, 49 Coniscliffe Road, Darlington,
>>>>>>>>>> County
>>>>>>>>>> Durham, DL3 7EH, UK
>>>>>>>>>> VAT Number: GB 698 3633 78
>>>>>>>>>>
>>>>>>>>>> On 02/03/2015 13:10, sandy.napoles at eccmg.cupet.cu wrote:
>>>>>>>>>>> eth0 Link encap:Ethernet HWaddr d0:27:88:64:e4:01
>>>>>>>>>>> inet addr:172.18.70.100 Mask:255.255.255.224
>>>>>>>>>>> inet6 addr: fe80::d227:88ff:fe64:e401/64
>>>>>>>>>>> Scope:Link
>>>>>>>>>>> UP BROADCAST RUNNING MULTICAST MTU:1500
>>>>>>>>>>> Metric:1
>>>>>>>>>>> RX packets:1413908 errors:0 dropped:0 overruns:0
>>>>>>>>>>> frame:0
>>>>>>>>>>> TX packets:447039 errors:0 dropped:0 overruns:0
>>>>>>>>>>> carrier:0
>>>>>>>>>>> collisions:0 txqueuelen:1000
>>>>>>>>>>> RX bytes:1693689457 (1.5 GiB) TX bytes:52974612
>>>>>>>>>>> (50.5
>>>>>>>>>>> MiB)
>>>>>>>>>>> Interrupt:43 Base address:0xc000
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> traceroute6 git.samba.org
>>>>>>>>>>> traceroute to git.samba.org (2001:638:603:d06e::80:230), 30 hops
>>>>>>>>>>> max,
>>>>>>>>>>> 80
>>>>>>>>>>> byte packets
>>>>>>>>>>> connect: Network is unreachable
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> Hi Sandy,
>>>>>>>>>>>>
>>>>>>>>>>>> Please can you provide the output from an *i**fconfig -a*
>>>>>>>>>>>> command?
>>>>>>>>>>>>
>>>>>>>>>>>> This should give an idea of what is going on. Turning off IPv6
>>>>>>>>>>>> will
>>>>>>>>>>>> not
>>>>>>>>>>>> be necessary if you can find the actual cause of the problem.
>>>>>>>>>>>>
>>>>>>>>>>>> You would not get this error message if you only have a link
>>>>>>>>>>>> local
>>>>>>>>>>>> address configured on your interface. You must have some form
>>>>>>>>>>>> of
>>>>>>>>>>>> global
>>>>>>>>>>>> address.
>>>>>>>>>>>>
>>>>>>>>>>>> Also, the IPv6 address is that of git.samba.org not samba.org.
>>>>>>>>>>>> You
>>>>>>>>>>>> could
>>>>>>>>>>>> try:
>>>>>>>>>>>>
>>>>>>>>>>>> *traceroute6 git.samba.org.*
>>>>>>>>>>>>
>>>>>>>>>>>> Best Regards,
>>>>>>>>>>>> David
>>>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>>> Dr David Holder CEng FIET MIEEE
>>>>>>>>>>>>
>>>>>>>>>>>> Erion Ltd, An Cala, Inverkirkaig, Lochinver, Sutherland, IV27
>>>>>>>>>>>> 4LR,
>>>>>>>>>>>> UK
>>>>>>>>>>>>
>>>>>>>>>>>> Reception: +44 (0)1422 207000
>>>>>>>>>>>>
>>>>>>>>>>>> Direct Dial: +44 (0)131 2026317
>>>>>>>>>>>>
>>>>>>>>>>>> http://www.erion.co.uk
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Registered in England and Wales. Registered Number 3521142
>>>>>>>>>>>> Registered Office: Newtons, 49 Coniscliffe Road, Darlington,
>>>>>>>>>>>> County
>>>>>>>>>>>> Durham, DL3 7EH, UK
>>>>>>>>>>>> VAT Number: GB 698 3633 78
>>>>>>>>>>>>
>>>>>>>>>>>> On 28/02/2015 18:38, Reindl Harald wrote:
>>>>>>>>>>>>> Am 28.02.2015 um 19:13 schrieb sandy.napoles at eccmg.cupet.cu:
>>>>>>>>>>>>>> I do not working with ipv6, I have disable, but I have the
>>>>>>>>>>>>>> same
>>>>>>>>>>>>>> error,
>>>>>>>>>>>>>> I
>>>>>>>>>>>>>> can read in internet that this ipv6 ip
>>>>>>>>>>>>>> 2001:638:603:d06e::80:230:
>>>>>>>>>>>>>> belong
>>>>>>>>>>>>>> to url samba.org....
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> If I try to connect to this url using some navegator I
>>>>>>>>>>>>>> connected
>>>>>>>>>>>>>> perfect....but when I run git pull using command line I can
>>>>>>>>>>>>>> not
>>>>>>>>>>>>>> connect..
>>>>>>>>>>>>> the question is *how* did you disable ipv6 - when ifconfig
>>>>>>>>>>>>> shows
>>>>>>>>>>>>> a
>>>>>>>>>>>>> "link local" ipv6 address the stack is *not* entirely disabled
>>>>>>>>>>>>>
>>>>>>>>>>>>> [root at srv-rhsoft:~]$ ifconfig eth0
>>>>>>>>>>>>> eth0: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST> mtu
>>>>>>>>>>>>> 1500
>>>>>>>>>>>>> ether 24:be:05:1a:c0:27 txqueuelen 100
>>>>>>>>>>>>> (Ethernet)
>>>>>>>>>>>>> RX packets 2460 bytes 577531 (563.9 KiB)
>>>>>>>>>>>>> RX errors 0 dropped 0 overruns 0 frame 0
>>>>>>>>>>>>> TX packets 8722 bytes 1981928 (1.8 MiB)
>>>>>>>>>>>>> TX errors 0 dropped 0 overruns 0 carrier 0
>>>>>>>>>>>>> collisions 0
>>>>>>>>>>>>> device interrupt 20 memory 0xf7e00000-f7e20000
>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Am 28.02.2015 um 15:37 schrieb sandy.napoles at eccmg.cupet.cu:
>>>>>>>>>>>>>>>> Hello list, Iam using samba4 as Domain Controller my verion
>>>>>>>>>>>>>>>> Version
>>>>>>>>>>>>>>>> 4.3.0pre1-GIT-068f9e2, but I have a little problem when I
>>>>>>>>>>>>>>>> going
>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>> update
>>>>>>>>>>>>>>>> using GIT PULL I have this error
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> error: Failed to connect to 2001:638:603:d06e::80:230:
>>>>>>>>>>>>>>>> Network
>>>>>>>>>>>>>>>> is
>>>>>>>>>>>>>>>> unreachable while accessing
>>>>>>>>>>>>>>>> http://git.samba.org/samba.git/info/refs
>>>>>>>>>>>>>>>> fatal: HTTP request failed
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> some body can helpme
>>>>>>>>>>>>>>> do you have working ipv6?
>>>>>>>>>>>>>>> if not disable it via sysctl.conf
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> net.ipv6.conf.all.disable_ipv6=1
>>>>>>>>>>>>>>> net.ipv6.conf.default.disable_ipv6=1
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> that above is most likely because the link-local address if
>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>> ipv6
>>>>>>>>>>>>>>> stack is enabled and some piece of software thinks it's
>>>>>>>>>>>>>>> useable
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> To unsubscribe from this list go to the following URL and
>>>>>>>>>>>>>>> read
>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>>>>>>> --
>>>>>>>>>>>> To unsubscribe from this list go to the following URL and read
>>>>>>>>>>>> the
>>>>>>>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> To unsubscribe from this list go to the following URL and read
>>>>>>>>>> the
>>>>>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>>>>>
>>>>>>>> --
>>>>>>>> To unsubscribe from this list go to the following URL and read the
>>>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>>>
>>>>>> OK, nobody seems to have asked this yet, what OS and how are you
>>>>>> trying
>>>>>> to update git, just what are you typing into the terminal ?
>>>>>>
>>>>>> Rowland
>>>>>>
>>>>>> --
>>>>>> To unsubscribe from this list go to the following URL and read the
>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>
>>>> OK, so you cd into the samba directory that you previously built samba4
>>>> in (presumably samba-master) and typed 'git pull'.
>>>>
>>>> If I do the same on my debian wheezy DC, I get this:
>>>>
>>>> root at dc01:~/samba-master# git pull
>>>> remote: Counting objects: 4622, done.
>>>> remote: Compressing objects: 100% (1904/1904), done.
>>>> remote: Total 3053 (delta 2436), reused 1373 (delta 1083)
>>>> Receiving objects: 100% (3053/3053), 554.51 KiB, done.
>>>> Resolving deltas: 100% (2436/2436), completed with 472 local objects.
>>>> From git://git.samba.org/samba
>>>> 87c5795..e2ed224 master -> origin/master
>>>> 6e1ba4c..5f5a01e v3-6-stable -> origin/v3-6-stable
>>>> 3be3266..4395552 v4-0-stable -> origin/v4-0-stable
>>>> f9693a1..2722ad6 v4-0-test -> origin/v4-0-test
>>>> 1e682c3..492c673 v4-1-stable -> origin/v4-1-stable
>>>> c4e46cd..d2c9373 v4-1-test -> origin/v4-1-test
>>>> c88a4f4..6c9d254 v4-2-stable -> origin/v4-2-stable
>>>> 77d8786..f645571 v4-2-test -> origin/v4-2-test
>>>> * [new tag] samba-4.0.25 -> samba-4.0.25
>>>> * [new tag] samba-4.1.17 -> samba-4.1.17
>>>> * [new tag] samba-4.2.0rc5 -> samba-4.2.0rc5
>>>> From git://git.samba.org/samba
>>>> * [new tag] ldb-1.1.20 -> ldb-1.1.20
>>>> * [new tag] samba-3.6.25 -> samba-3.6.25
>>>> * [new tag] tevent-0.9.23 -> tevent-0.9.23
>>>> Updating 87c5795..e2ed224
>>>>
>>>> and so on
>>>>
>>>> So there must be a difference between your setup and mine, but what ??
>>>>
>>>> Rowland
>>>>
>>>> --
>>>> To unsubscribe from this list go to the following URL and read the
>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>
>> --
>> To unsubscribe from this list go to the following URL and read the
>> instructions: https://lists.samba.org/mailman/options/samba
>>
>
More information about the samba
mailing list