[Samba] Update
David Holder
david.holder at erion.co.uk
Mon Mar 2 10:27:18 MST 2015
Sorry Rowland - that was a typo!
------------------------------------------------------------------------
Dr David Holder CEng FIET MIEEE
Erion Ltd, An Cala, Inverkirkaig, Lochinver, Sutherland, IV27 4LR, UK
Reception: +44 (0)1422 207000
Direct Dial: +44 (0)131 2026317
http://www.erion.co.uk
Registered in England and Wales. Registered Number 3521142
Registered Office: Newtons, 49 Coniscliffe Road, Darlington, County
Durham, DL3 7EH, UK
VAT Number: GB 698 3633 78
On 02/03/2015 17:24, Rowland Penny wrote:
> On 02/03/15 17:20, David Holder wrote:
>> Hi Roland,
>>
>> It will be useful to see the resolv.conf. However, I don't think that
>> this is a name resolution issue as it is clear that git.samba.org is
>> being resolved to at least the v6 address. If that works then A &
>> AAAA records should be returned to the resolver regardless of the
>> transport used. There must be something else going on as well.
>>
>> Could try
>> host -t a git.samba.org
>>
>> and
>> host -t aaaa git.samba.org
>>
>> Just to be prove it...
>>
>> David
>> ------------------------------------------------------------------------
>> Dr David Holder CEng FIET MIEEE
>>
>> Erion Ltd, An Cala, Inverkirkaig, Lochinver, Sutherland, IV27 4LR, UK
>>
>> Reception: +44 (0)1422 207000
>>
>> Direct Dial: +44 (0)131 2026317
>>
>> http://www.erion.co.uk
>>
>>
>> Registered in England and Wales. Registered Number 3521142
>> Registered Office: Newtons, 49 Coniscliffe Road, Darlington, County
>> Durham, DL3 7EH, UK
>> VAT Number: GB 698 3633 78
>>
>> On 02/03/2015 17:08, Rowland Penny wrote:
>>> On 02/03/15 16:45, sandy.napoles at eccmg.cupet.cu wrote:
>>>> root at samba:/home/samba-master# git pull
>>>> error: Failed to connect to 2001:638:603:d06e::80:230: Network is
>>>> unreachable while accessing http://git.samba.org/samba.git/info/refs
>>>> fatal: HTTP request failed
>>>> root at samba:/home/samba-master#
>>>>
>>>>
>>>>
>>>>> On 02/03/15 16:21, sandy.napoles at eccmg.cupet.cu wrote:
>>>>>> My OS is Debian 7 and I only writte git pull
>>>>>>
>>>>>>> On 02/03/15 15:05, sandy.napoles at eccmg.cupet.cu wrote:
>>>>>>>> ifconfig -a
>>>>>>>> eth0 Link encap:Ethernet HWaddr 00:0c:29:82:ec:80
>>>>>>>> inet addr:172.18.68.8 Bcast:172.18.68.31
>>>>>>>> Mask:255.255.255.224
>>>>>>>> inet6 addr: fe80::20c:29ff:fe82:ec80/64 Scope:Link
>>>>>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>>>>>> RX packets:107940 errors:0 dropped:0 overruns:0
>>>>>>>> frame:0
>>>>>>>> TX packets:109315 errors:0 dropped:0 overruns:0
>>>>>>>> carrier:0
>>>>>>>> collisions:0 txqueuelen:1000
>>>>>>>> RX bytes:14394078 (13.7 MiB) TX bytes:20253880
>>>>>>>> (19.3 MiB)
>>>>>>>>
>>>>>>>> lo Link encap:Local Loopback
>>>>>>>> inet addr:127.0.0.1 Mask:255.0.0.0
>>>>>>>> inet6 addr: ::1/128 Scope:Host
>>>>>>>> UP LOOPBACK RUNNING MTU:16436 Metric:1
>>>>>>>> RX packets:252 errors:0 dropped:0 overruns:0 frame:0
>>>>>>>> TX packets:252 errors:0 dropped:0 overruns:0
>>>>>>>> carrier:0
>>>>>>>> collisions:0 txqueuelen:0
>>>>>>>> RX bytes:38555 (37.6 KiB) TX bytes:38555 (37.6 KiB)
>>>>>>>>
>>>>>>>>
>>>>>>>> ip -f inet6 route
>>>>>>>> fe80::/64 dev eth0 proto kernel metric 256
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>> Thanks. No other interfaces (ifconfig -a)?
>>>>>>>>>
>>>>>>>>> Also output of
>>>>>>>>>
>>>>>>>>> ip -f inet6 route
>>>>>>>>>
>>>>>>>>> would be useful.
>>>>>>>>>
>>>>>>>>> David
>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>
>>>>>>>>> Dr David Holder CEng FIET MIEEE
>>>>>>>>>
>>>>>>>>> Erion Ltd, An Cala, Inverkirkaig, Lochinver, Sutherland, IV27
>>>>>>>>> 4LR, UK
>>>>>>>>>
>>>>>>>>> Reception: +44 (0)1422 207000
>>>>>>>>>
>>>>>>>>> Direct Dial: +44 (0)131 2026317
>>>>>>>>>
>>>>>>>>> http://www.erion.co.uk
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Registered in England and Wales. Registered Number 3521142
>>>>>>>>> Registered Office: Newtons, 49 Coniscliffe Road, Darlington,
>>>>>>>>> County
>>>>>>>>> Durham, DL3 7EH, UK
>>>>>>>>> VAT Number: GB 698 3633 78
>>>>>>>>>
>>>>>>>>> On 02/03/2015 14:26, sandy.napoles at eccmg.cupet.cu wrote:
>>>>>>>>>> in /etc/gai.conf all is coment
>>>>>>>>>>
>>>>>>>>>>> Hi Sandy,
>>>>>>>>>>>
>>>>>>>>>>> Thanks! Curious. Do you have any other interfaces? ifconfig -a
>>>>>>>>>>> should
>>>>>>>>>>> show them all including loopback.
>>>>>>>>>>>
>>>>>>>>>>> What is puzzling me is that it should not even attempt to
>>>>>>>>>>> use IPv6
>>>>>>>>>>> to
>>>>>>>>>>> reach a global address when it only has a link-local
>>>>>>>>>>> address. It
>>>>>>>>>>> should
>>>>>>>>>>> gracefully fall back to IPv4 (as per RFC 6724 or RFC 3484
>>>>>>>>>>> depending
>>>>>>>>>>> on
>>>>>>>>>>> the kernel version). Since you have an IPv4 address and I
>>>>>>>>>>> assume an
>>>>>>>>>>> IPv4
>>>>>>>>>>> connection, then this should work over IPv4.
>>>>>>>>>>>
>>>>>>>>>>> I'm assume that you do not have an /etc/gai.conf file
>>>>>>>>>>> installed?
>>>>>>>>>>>
>>>>>>>>>>> David
>>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>>
>>>>>>>>>>> Dr David Holder CEng FIET MIEEE
>>>>>>>>>>>
>>>>>>>>>>> Erion Ltd, An Cala, Inverkirkaig, Lochinver, Sutherland,
>>>>>>>>>>> IV27 4LR,
>>>>>>>>>>> UK
>>>>>>>>>>>
>>>>>>>>>>> Reception: +44 (0)1422 207000
>>>>>>>>>>>
>>>>>>>>>>> Direct Dial: +44 (0)131 2026317
>>>>>>>>>>>
>>>>>>>>>>> http://www.erion.co.uk
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Registered in England and Wales. Registered Number 3521142
>>>>>>>>>>> Registered Office: Newtons, 49 Coniscliffe Road, Darlington,
>>>>>>>>>>> County
>>>>>>>>>>> Durham, DL3 7EH, UK
>>>>>>>>>>> VAT Number: GB 698 3633 78
>>>>>>>>>>>
>>>>>>>>>>> On 02/03/2015 13:10, sandy.napoles at eccmg.cupet.cu wrote:
>>>>>>>>>>>> eth0 Link encap:Ethernet HWaddr d0:27:88:64:e4:01
>>>>>>>>>>>> inet addr:172.18.70.100 Mask:255.255.255.224
>>>>>>>>>>>> inet6 addr: fe80::d227:88ff:fe64:e401/64
>>>>>>>>>>>> Scope:Link
>>>>>>>>>>>> UP BROADCAST RUNNING MULTICAST MTU:1500
>>>>>>>>>>>> Metric:1
>>>>>>>>>>>> RX packets:1413908 errors:0 dropped:0
>>>>>>>>>>>> overruns:0
>>>>>>>>>>>> frame:0
>>>>>>>>>>>> TX packets:447039 errors:0 dropped:0 overruns:0
>>>>>>>>>>>> carrier:0
>>>>>>>>>>>> collisions:0 txqueuelen:1000
>>>>>>>>>>>> RX bytes:1693689457 (1.5 GiB) TX bytes:52974612
>>>>>>>>>>>> (50.5
>>>>>>>>>>>> MiB)
>>>>>>>>>>>> Interrupt:43 Base address:0xc000
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> traceroute6 git.samba.org
>>>>>>>>>>>> traceroute to git.samba.org (2001:638:603:d06e::80:230), 30
>>>>>>>>>>>> hops
>>>>>>>>>>>> max,
>>>>>>>>>>>> 80
>>>>>>>>>>>> byte packets
>>>>>>>>>>>> connect: Network is unreachable
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi Sandy,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Please can you provide the output from an *i**fconfig -a*
>>>>>>>>>>>>> command?
>>>>>>>>>>>>>
>>>>>>>>>>>>> This should give an idea of what is going on. Turning off
>>>>>>>>>>>>> IPv6
>>>>>>>>>>>>> will
>>>>>>>>>>>>> not
>>>>>>>>>>>>> be necessary if you can find the actual cause of the problem.
>>>>>>>>>>>>>
>>>>>>>>>>>>> You would not get this error message if you only have a link
>>>>>>>>>>>>> local
>>>>>>>>>>>>> address configured on your interface. You must have some
>>>>>>>>>>>>> form of
>>>>>>>>>>>>> global
>>>>>>>>>>>>> address.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Also, the IPv6 address is that of git.samba.org not
>>>>>>>>>>>>> samba.org.
>>>>>>>>>>>>> You
>>>>>>>>>>>>> could
>>>>>>>>>>>>> try:
>>>>>>>>>>>>>
>>>>>>>>>>>>> *traceroute6 git.samba.org.*
>>>>>>>>>>>>>
>>>>>>>>>>>>> Best Regards,
>>>>>>>>>>>>> David
>>>>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>>>>
>>>>>>>>>>>>> Dr David Holder CEng FIET MIEEE
>>>>>>>>>>>>>
>>>>>>>>>>>>> Erion Ltd, An Cala, Inverkirkaig, Lochinver, Sutherland, IV27
>>>>>>>>>>>>> 4LR,
>>>>>>>>>>>>> UK
>>>>>>>>>>>>>
>>>>>>>>>>>>> Reception: +44 (0)1422 207000
>>>>>>>>>>>>>
>>>>>>>>>>>>> Direct Dial: +44 (0)131 2026317
>>>>>>>>>>>>>
>>>>>>>>>>>>> http://www.erion.co.uk
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Registered in England and Wales. Registered Number 3521142
>>>>>>>>>>>>> Registered Office: Newtons, 49 Coniscliffe Road, Darlington,
>>>>>>>>>>>>> County
>>>>>>>>>>>>> Durham, DL3 7EH, UK
>>>>>>>>>>>>> VAT Number: GB 698 3633 78
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 28/02/2015 18:38, Reindl Harald wrote:
>>>>>>>>>>>>>> Am 28.02.2015 um 19:13 schrieb sandy.napoles at eccmg.cupet.cu:
>>>>>>>>>>>>>>> I do not working with ipv6, I have disable, but I have
>>>>>>>>>>>>>>> the same
>>>>>>>>>>>>>>> error,
>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>> can read in internet that this ipv6 ip
>>>>>>>>>>>>>>> 2001:638:603:d06e::80:230:
>>>>>>>>>>>>>>> belong
>>>>>>>>>>>>>>> to url samba.org....
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> If I try to connect to this url using some navegator I
>>>>>>>>>>>>>>> connected
>>>>>>>>>>>>>>> perfect....but when I run git pull using command line I
>>>>>>>>>>>>>>> can not
>>>>>>>>>>>>>>> connect..
>>>>>>>>>>>>>> the question is *how* did you disable ipv6 - when
>>>>>>>>>>>>>> ifconfig shows
>>>>>>>>>>>>>> a
>>>>>>>>>>>>>> "link local" ipv6 address the stack is *not* entirely
>>>>>>>>>>>>>> disabled
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> [root at srv-rhsoft:~]$ ifconfig eth0
>>>>>>>>>>>>>> eth0: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST> mtu
>>>>>>>>>>>>>> 1500
>>>>>>>>>>>>>> ether 24:be:05:1a:c0:27 txqueuelen 100
>>>>>>>>>>>>>> (Ethernet)
>>>>>>>>>>>>>> RX packets 2460 bytes 577531 (563.9 KiB)
>>>>>>>>>>>>>> RX errors 0 dropped 0 overruns 0 frame 0
>>>>>>>>>>>>>> TX packets 8722 bytes 1981928 (1.8 MiB)
>>>>>>>>>>>>>> TX errors 0 dropped 0 overruns 0 carrier 0
>>>>>>>>>>>>>> collisions 0
>>>>>>>>>>>>>> device interrupt 20 memory 0xf7e00000-f7e20000
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Am 28.02.2015 um 15:37 schrieb
>>>>>>>>>>>>>>>> sandy.napoles at eccmg.cupet.cu:
>>>>>>>>>>>>>>>>> Hello list, Iam using samba4 as Domain Controller my
>>>>>>>>>>>>>>>>> verion
>>>>>>>>>>>>>>>>> Version
>>>>>>>>>>>>>>>>> 4.3.0pre1-GIT-068f9e2, but I have a little problem when I
>>>>>>>>>>>>>>>>> going
>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>> update
>>>>>>>>>>>>>>>>> using GIT PULL I have this error
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> error: Failed to connect to 2001:638:603:d06e::80:230:
>>>>>>>>>>>>>>>>> Network
>>>>>>>>>>>>>>>>> is
>>>>>>>>>>>>>>>>> unreachable while accessing
>>>>>>>>>>>>>>>>> http://git.samba.org/samba.git/info/refs
>>>>>>>>>>>>>>>>> fatal: HTTP request failed
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> some body can helpme
>>>>>>>>>>>>>>>> do you have working ipv6?
>>>>>>>>>>>>>>>> if not disable it via sysctl.conf
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> net.ipv6.conf.all.disable_ipv6=1
>>>>>>>>>>>>>>>> net.ipv6.conf.default.disable_ipv6=1
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> that above is most likely because the link-local
>>>>>>>>>>>>>>>> address if
>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>> ipv6
>>>>>>>>>>>>>>>> stack is enabled and some piece of software thinks it's
>>>>>>>>>>>>>>>> useable
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>> To unsubscribe from this list go to the following URL
>>>>>>>>>>>>>>>> and read
>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>> instructions:
>>>>>>>>>>>>>>>> https://lists.samba.org/mailman/options/samba
>>>>>>>>>>>>> --
>>>>>>>>>>>>> To unsubscribe from this list go to the following URL and
>>>>>>>>>>>>> read
>>>>>>>>>>>>> the
>>>>>>>>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> To unsubscribe from this list go to the following URL and
>>>>>>>>>>> read the
>>>>>>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> To unsubscribe from this list go to the following URL and read
>>>>>>>>> the
>>>>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>>>>
>>>>>>> OK, nobody seems to have asked this yet, what OS and how are you
>>>>>>> trying
>>>>>>> to update git, just what are you typing into the terminal ?
>>>>>>>
>>>>>>> Rowland
>>>>>>>
>>>>>>> --
>>>>>>> To unsubscribe from this list go to the following URL and read the
>>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>>
>>>>> OK, so you cd into the samba directory that you previously built
>>>>> samba4
>>>>> in (presumably samba-master) and typed 'git pull'.
>>>>>
>>>>> If I do the same on my debian wheezy DC, I get this:
>>>>>
>>>>> root at dc01:~/samba-master# git pull
>>>>> remote: Counting objects: 4622, done.
>>>>> remote: Compressing objects: 100% (1904/1904), done.
>>>>> remote: Total 3053 (delta 2436), reused 1373 (delta 1083)
>>>>> Receiving objects: 100% (3053/3053), 554.51 KiB, done.
>>>>> Resolving deltas: 100% (2436/2436), completed with 472 local objects.
>>>>> From git://git.samba.org/samba
>>>>> 87c5795..e2ed224 master -> origin/master
>>>>> 6e1ba4c..5f5a01e v3-6-stable -> origin/v3-6-stable
>>>>> 3be3266..4395552 v4-0-stable -> origin/v4-0-stable
>>>>> f9693a1..2722ad6 v4-0-test -> origin/v4-0-test
>>>>> 1e682c3..492c673 v4-1-stable -> origin/v4-1-stable
>>>>> c4e46cd..d2c9373 v4-1-test -> origin/v4-1-test
>>>>> c88a4f4..6c9d254 v4-2-stable -> origin/v4-2-stable
>>>>> 77d8786..f645571 v4-2-test -> origin/v4-2-test
>>>>> * [new tag] samba-4.0.25 -> samba-4.0.25
>>>>> * [new tag] samba-4.1.17 -> samba-4.1.17
>>>>> * [new tag] samba-4.2.0rc5 -> samba-4.2.0rc5
>>>>> From git://git.samba.org/samba
>>>>> * [new tag] ldb-1.1.20 -> ldb-1.1.20
>>>>> * [new tag] samba-3.6.25 -> samba-3.6.25
>>>>> * [new tag] tevent-0.9.23 -> tevent-0.9.23
>>>>> Updating 87c5795..e2ed224
>>>>>
>>>>> and so on
>>>>>
>>>>> So there must be a difference between your setup and mine, but
>>>>> what ??
>>>>>
>>>>> Rowland
>>>>>
>>>>> --
>>>>> To unsubscribe from this list go to the following URL and read the
>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>
>>>>
>>>
>>> OK, what have you got in /etc/resolv.conf ?
>>> If it points to your DC, what are your forwarders ?
>>>
>>> Rowland
>>>
>>>
>>>
>>
>
> I understand where you are coming from, but start at the bottom and
> work up :-)
>
> Rowland (and no it is not roland)
More information about the samba
mailing list