[Samba] Windows 8.1 Join Domain

Daniel Müller mueller at tropenklinik.de
Fri Jun 26 04:32:03 MDT 2015


You have a dotted domain like my.dom?

The windows 8.1 will refuse to join.
Just look at:
http://tam.belchenstuermer.de/join-a-samba-domain-with-dot-in-its-name-using
-windows-8-1/


Good Luck
Daniel


EDV Daniel Müller

Leitung EDV
Tropenklinik Paul-Lechler-Krankenhaus
Paul-Lechler-Str. 24
72076 Tübingen 
Tel.: 07071/206-463, Fax: 07071/206-499
eMail: mueller at tropenklinik.de
Internet: www.tropenklinik.de 



-----Ursprüngliche Nachricht-----
Von: samba-bounces at lists.samba.org [mailto:samba-bounces at lists.samba.org] Im
Auftrag von Daniel Carrasco Marín
Gesendet: Freitag, 26. Juni 2015 12:13
An: Chuck Theobald
Cc: samba
Betreff: Re: [Samba] Windows 8.1 Join Domain

2015-06-26 2:13 GMT+02:00 Chuck Theobald <chuckt at uoregon.edu>:

> I have Samba 3.6.6 configured as a domain controller, but am unable to 
> get new machines to join the domain. I've set the WINS on these 
> machines in the
> IPv4 network configuration and get as far as entering my samba (ldap) 
> credentials, but the whirlything spins for a while then says it cannot 
> contact the domain, domain does not exist.
>
> If a machine had already been part of the domain when it was XP, then 
> re-joining seems to work, but new machines are unable to join. I 
> suspect that this may be related to my add machine script, but that 
> script works so far as creating the record, but still no welcome into the
domain.
>
> What is the current wisdom for making this happen each and every time 
> for all my machines?
>
> Thanks,
>
> --
> Chuck Theobald
> System Administrator
> The Robert and Beverly Lewis Center for Neuroimaging University of 
> Oregon
> P: 541-346-0343
> F: 541-346-0345
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
>

I had a similar problem with a W7 machine and Samba 3. In my case was
because i had joined a Samba 4 domain before, but this lines on a .reg file
fixed my problem:



Windows Registry Editor Version 5.00

; Win7_Samba3DomainMember
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanManWorkstation\Para
meters]

"DNSNameResolutionRequired"=dword:00000000
"DomainCompatibilityMode"=dword:00000001

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servicess\Netlogon\Parameters]
"RequireSignOrSeal"=dword:00000001
"RequireStrongKey"=dword:00000001



Please, remember to backup the original registry settings to allow to
restore if something goes wrong.

Greetings!!
--
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba



More information about the samba mailing list