[Samba] Samba client doesn't work SMB2 with MAC 0S 10.9.5
Michael.Tompkins at xerox.com
Tue Sep 30 12:48:37 MDT 2014
I should have sent the trace for samba 4.0.7 instead of 3.6.5(it was a version before your patches). I did it first with SMB1 and then with SMB2. So this is a 4.0.7 trace. It fails the Negotiate Protocol Response for SMB2.
From: Ralph Böhme [mailto:rb at sernet.de]
Sent: Tuesday, September 30, 2014 12:56 PM
To: Jeremy Allison
Cc: Tompkins, Michael; samba at lists.samba.org; USA Xerox Samba
Subject: Re: [Samba] Samba client doesn't work SMB2 with MAC 0S 10.9.5
On Tue, Sep 30, 2014 at 09:31:08AM -0700, Jeremy Allison wrote:
> On Tue, Sep 30, 2014 at 06:27:15PM +0200, Ralph Böhme wrote:
> > On Tue, Sep 30, 2014 at 08:55:46AM -0700, Jeremy Allison wrote:
> > > On Tue, Sep 30, 2014 at 10:16:46AM +0000, Tompkins, Michael wrote:
> > > > Jeremy, we have implemented your updates for to support SMB2 in both 3.6.5 and 4.0.7.
> > > > That is working fine for both, with the exception of MAC OS 10.9..5 servers.
> > >
> > > Ah ok - that's information we didn't originally have :-).
> > >
> > > So this is actually a custom version of 3.6 then.
> > >
> > > > There is a lot of discussion on the web about the problems, and
> > > > most people talk about a workaround to dummy down to SMB1(NT1),
> > > > which really is not a desirable option, especially for FIPS
> > > > support. Was there a specific fix to so the smbclient and the MAC OS 10.9.5 server work together? That's the information we are looking for.
> > >
> > > Easiest thing to do is make your modified 3.6.x source available
> > > (there are others who might want to see that patchset) and then
> > > upload a wireshark trace of the problem. Remember you're asking
> > > for help with a modified (unsupported) smbclient version.
> > >
> > > Do the 10.9..5 servers work with the 4.1 client ? If so, then
> > > there's an error in your back-port. If not, then we have a generic
> > > bug we need to fix.
> > >
> > > Knowing which is the case would be very valuable :-).
> > got mixed results here: on my system Samba 4.1.6  and master
> > fail, while I've been told by Björn Jacke that it works on his
> > system with 4.1.6. Needs more testing.
> Can you get me a packet trace ?
$ ./bin/smbclient4 -U 'ralph%SECRET' //10.10.10.30/indexed -mSMB2 Connection to \\10.10.10.30\indexed failed - NT_STATUS_REVISION_MISMATCH
$ ./bin/smbclient4 -U 'ralph%SECRET' //10.10.10.30/indexed
smb: \> exit
Note that SMB1 works now, it didn't the whole day. Didn't change a thing, go figure...
Server is running OS X 10.9.5. smbclient4 is from git master.
SerNet GmbH, Bahnhofsallee 1b, 37081 Göttingen
phone: +49-551-370000-0, fax: +49-551-370000-9 AG Göttingen, HRB 2816, GF: Dr. Johannes Loxen http://www.sernet.de,mailto:email@example.com
More information about the samba