[Samba] advice : samba cups and point and print ( hardware needed )

[L.P.H. van Belle]

thank you achim, good info.. 

ok, so the Kyocera Mita is an option. 
anyone else who whats to share some info? 
and im thinking in printers which do 50+ pages/min 
i have to replace 3x 75 page/min and 1x 90 page/min printers..  


Louis


>-----Oorspronkelijk bericht-----
>Van: achim at ag-web.biz [mailto:samba-bounces at lists.samba.org] 
>Namens Achim Gottinger
>Verzonden: woensdag 10 september 2014 18:56
>Aan: samba at lists.samba.org
>Onderwerp: Re: [Samba] advice : samba cups and point and print 
>( hardware needed )
>
>Am 10.09.2014 12:38, schrieb L.P.H. van Belle:
>> Hi
>>   
>> it's a bit offtopic here, but its a good place to ask..
>>   
>> I'm looking for some new printer hardware and i was thinking 
>lets ask the samba people..
>>
>> I'm just a bit wondering which brand and models of printers 
>do you all use.
>> I'm using samba with cups with point and print setup.
>> I only use windows drivers ( no ppd's ) .
>>   
>> now im having for example some HP 4345MFP printers running 
>and i need some extra ( and maybe bigger ) printer.
>> so what do you all use for printer hardware ( in a setup like above )
>>   
>> im open for any advice..
>>   
>> i know for example that :
>> - Xerox hardware with the latest printer drivers does not 
>work in above setup.
>> - HP hardware with the latest printer driver (globa) do work 
>ok ( after disableing the snmp communication in the printer driver )
>> so please fill this in ... this wil make it much easier for 
>lots of people then to choose..
>> and this way we force the big companies to also tink samba 
>when developing printer drivers. ...
>>   
>> Greetz,
>>   
>> Louis
>>   
>>   
>>   
>- Kyocera Mita printers work fine with the generic driver 
>packages. The 
>only limitation is that during auto detection of the connected 
>printers 
>you manually have to enter the printer's ip address for snmp 
>discovery. 
>When used on an windows server the address gets detected. We used the 
>following models FS-C5150DN, FS-C5015N, FS-3920DN, FS-2000DN.
>- Brother, MFC 7840W and MFC 7360DN had worked fine for an while 
>(~4.0.5) without restrictions and stopped working (4.1.?) after an 
>update. Did not get em running again so i moved them to an windows vm.
>- HP with generic drivers worked fine for with XP but not with Windows 
>7, guess i need the snmp fix you mentioned. We use Color LaserJet 
>CP1510, LaserJet 1100, LaserJet Pro 400 MFP.
>
>achim~
>-- 
>To unsubscribe from this list go to the following URL and read the
>instructions:  https://lists.samba.org/mailman/options/samba
>
>