[Samba] Samba + CUPS

Rowland Penny rowlandpenny at googlemail.com
Mon Oct 20 09:40:52 MDT 2014


On 20/10/14 16:35, José Eduardo S. C. Xavier wrote:
> I also tried that: http://pastebin.com/Kea0xCTy
>
> 2014-10-20 16:33 GMT+01:00 Sébastien Le Ray <sebastien-samba at orniz.org>:
>
>> apt-get -t wheezy-backports install winbind
>>
>> Regards
>> Le 20/10/2014 17:26, José Eduardo S. C. Xavier a écrit :
>>
>>> It now fails with the following error: http://pastebin.com/CE5386Mh
>>> When I do sudo apt-get install winbind there is a reference to a 3.6.6
>>> version of it:
>>>
>>> pi at lynx ~ $ sudo apt-get install winbind
>>> Reading package lists... Done
>>> Building dependency tree
>>> Reading state information... Done
>>> Some packages could not be installed. This may mean that you have
>>> requested an impossible situation or if you are using the unstable
>>> distribution that some required packages have not yet been created
>>> or been moved out of Incoming.
>>> The following information may help to resolve the situation:
>>>
>>> The following packages have unmet dependencies:
>>>    winbind : Depends: libwbclient0 (= 2:3.6.6-6+deb7u4) but
>>> 2:4.1.11+dfsg-1~bpo70+1 is to be installed
>>>              Depends: samba-common (= 2:3.6.6-6+deb7u4) but
>>> 2:4.1.11+dfsg-1~bpo70+1 is to be installed
>>>              Recommends: libpam-winbind but it is not going to be installed
>>>              Recommends: libnss-winbind but it is not going to be installed
>>> E: Unable to correct problems, you have held broken packages.
>>> pi at lynx ~ $
>>>
>>>
>>>
>>> 2014-10-20 16:18 GMT+01:00 José Eduardo S. C. Xavier <
>>> josescxavier at gmail.com
>>>
>>>> :
>>>> 2 days of compile process
>>>> https://lists.samba.org/archive/samba-technical/2012-August/086330.html
>>>> :s
>>>>
>>>> 2014-10-20 16:16 GMT+01:00 José Eduardo S. C. Xavier <
>>>> josescxavier at gmail.com>:
>>>>
>>>> I can try to compile from source if you guide me on this process.
>>>>
>>>>> 2014-10-20 16:09 GMT+01:00 José Eduardo S. C. Xavier <
>>>>> josescxavier at gmail.com>:
>>>>>
>>>>> How can I know If I it is installing the current version? saw someone
>>>>>
>>>>>> with a similar problem because have installed a armv7 package instead
>>>>>> of a
>>>>>> armv6.
>>>>>>
>>>>>> 2014-10-20 16:00 GMT+01:00 L.P.H. van Belle <belle at bazuin.nl>:
>>>>>>
>>>>>>    ok, try the following.
>>>>>>
>>>>>>> 1) make a backup of /etc/samba /var/lib/samba /var/cache/samba
>>>>>>>
>>>>>>> 2
>>>>>>> this removes and purges/clears all of samba
>>>>>>> apt-get remove --purge `dpkg -l | grep samba | cut -f3 -d" "`
>>>>>>>
>>>>>>> if needed apt-get install mlocate
>>>>>>> updatedb
>>>>>>> locate samba
>>>>>>> clear the rest of it.
>>>>>>>
>>>>>>> install backports samba again.
>>>>>>>
>>>>>>> Louis
>>>>>>>
>>>>>>>
>>>>>>>    ------------------------------
>>>>>>>    *Van:* José Eduardo S. C. Xavier [mailto:josescxavier at gmail.com]
>>>>>>> *Verzonden:* maandag 20 oktober 2014 16:57
>>>>>>> *Aan:* L.P.H. van Belle
>>>>>>>
>>>>>>> *CC:* samba at lists.samba.org
>>>>>>> *Onderwerp:* Re: [Samba] Samba + CUPS
>>>>>>>
>>>>>>>
>>>>>>>    they look like for arm
>>>>>>>
>>>>>>> 2014-10-20 15:56 GMT+01:00 José Eduardo S. C. Xavier <
>>>>>>> josescxavier at gmail.com>:
>>>>>>>
>>>>>>>   pi at lynx ~ $ dpkg -l | grep samba
>>>>>>>> ii  python-samba
>>>>>>>> 2:4.1.11+dfsg-1~bpo70+1                 armhf        Python bindings
>>>>>>>> for
>>>>>>>> Samba
>>>>>>>> iF  samba
>>>>>>>> 2:4.1.11+dfsg-1~bpo70+1                 armhf        SMB/CIFS file,
>>>>>>>> print,
>>>>>>>> and login server for Unix
>>>>>>>> ii  samba-common
>>>>>>>> 2:4.1.11+dfsg-1~bpo70+1                 all          common files
>>>>>>>> used by
>>>>>>>> both the Samba server and client
>>>>>>>> ii  samba-common-bin
>>>>>>>> 2:4.1.11+dfsg-1~bpo70+1                 armhf        Samba common
>>>>>>>> files
>>>>>>>> used by both the server and the client
>>>>>>>> ii  samba-dsdb-modules
>>>>>>>> 2:4.1.11+dfsg-1~bpo70+1                 armhf        Samba Directory
>>>>>>>> Services Database
>>>>>>>> ii  samba-libs:armhf
>>>>>>>> 2:4.1.11+dfsg-1~bpo70+1                 armhf        Samba core
>>>>>>>> libraries
>>>>>>>> ii  samba-vfs-modules
>>>>>>>> 2:4.1.11+dfsg-1~bpo70+1                 armhf        Samba Virtual
>>>>>>>> FileSystem plugins
>>>>>>>> pi at lynx ~ $
>>>>>>>>
>>>>>>>>
>>>>>>>> 2014-10-20 15:55 GMT+01:00 José Eduardo S. C. Xavier <
>>>>>>>> josescxavier at gmail.com>:
>>>>>>>>
>>>>>>>>    I think the problem is that I'm running it on a raspberry pi (ARM)
>>>>>>>>
>>>>>>>>> and the source should be for x86/x64, no?
>>>>>>>>>
>>>>>>>>> 2014-10-20 15:54 GMT+01:00 L.P.H. van Belle <belle at bazuin.nl>:
>>>>>>>>>
>>>>>>>>> please post the output of :
>>>>>>>>>
>>>>>>>>>> dpkg -l | grep samba
>>>>>>>>>> to make sure there is no old samba4 things.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>   -----Oorspronkelijk bericht-----
>>>>>>>>>>> Van: josescxavier at gmail.com
>>>>>>>>>>> [mailto:samba-bounces at lists.samba.org] Namens José Eduardo S. C.
>>>>>>>>>>>
>>>>>>>>>> Xavier
>>>>>>>>>>
>>>>>>>>>>> Verzonden: maandag 20 oktober 2014 16:46
>>>>>>>>>>> Aan: Rowland Penny
>>>>>>>>>>>
>>>>>>>>>>    >CC: samba at lists.samba.org
>>>>>>>>>>
>>>>>>>>>>> Onderwerp: Re: [Samba] Samba + CUPS
>>>>>>>>>>>
>>>>>>>>>>> http://pastebin.com/Apr8HJPj it fails to run :s
>>>>>>>>>>>
>>>>>>>>>>> 2014-10-20 14:02 GMT+01:00 José Eduardo S. C. Xavier
>>>>>>>>>>> <josescxavier at gmail.com
>>>>>>>>>>>
>>>>>>>>>>>> :
>>>>>>>>>>>> lets try it :)
>>>>>>>>>>>>
>>>>>>>>>>>> 2014-10-20 13:37 GMT+01:00 Rowland Penny
>>>>>>>>>>>>
>>>>>>>>>>> <rowlandpenny at googlemail.com>:
>>>>>>>>>>>
>>>>>>>>>>>> On 20/10/14 13:27, José Eduardo S. C. Xavier wrote:
>>>>>>>>>>>>>   The samba from wheezy backports is the 3.6.6, right? it is
>>>>>>>>>>>>> what I had
>>>>>>>>>>>> installed with sudo apt-get install samba.
>>>>>>>>>>>>>> 2014-10-20 13:24 GMT+01:00 L.P.H. van Belle <belle at bazuin.nl>:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>      stop..
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Dont install samba4.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Of use sernet-samba
>>>>>>>>>>>>>>> or use samba from wheezy backports.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> samba4 is the most bad version.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>    -----Oorspronkelijk bericht-----
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Van: josescxavier at gmail.com
>>>>>>>>>>>>>>>> [mailto:samba-bounces at lists.samba.org] Namens José Eduardo
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> S. C.
>>>>>>>>>>> Xavier
>>>>>>>>>>>>>>>> Verzonden: maandag 20 oktober 2014 14:22
>>>>>>>>>>>>>>>> Aan: Sven Schwedas
>>>>>>>>>>>>>>>> CC: samba at lists.samba.org
>>>>>>>>>>>>>>>> Onderwerp: Re: [Samba] Samba + CUPS
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I'm removing samba and install samba4 from apt-get to
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> try if it works.
>>>>>>>>>>>> 2014-10-20 13:19 GMT+01:00 Sven Schwedas <
>>>>>>>>>>>>>>> sven.schwedas at tao.at>:
>>>>>>>>>>>    On 2014-10-20 14:13, José Eduardo S. C. Xavier wrote:
>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>> I have configured a CUPS printer server with samba and it
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>   worked with
>>>>>>>>>>>>>>>>> Windows 7 32/64bits but now with windows 8 it can't get
>>>>>>>>>>>>>>>>> the drivers.
>>>>>>>>>>>>>>>>> I found it https://bugzilla.samba.org/show_bug.cgi?id=9474
>>>>>>>>>>>>>>>>> but doesn't
>>>>>>>>>>>>>>>>> know
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>   how to use the patch to solve the problem. I'm using a
>>>>>>>>>>>>>>>>>>   raspberry pi.
>>>>>>>>>>>>>>>>> By updating to a more recent Samba version, as you were
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>   instructed to on
>>>>>>>>>>>>>>>>   the bugtracker.
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> Mit freundlichen Grüßen, / Best Regards,
>>>>>>>>>>>>>>>>> Sven Schwedas
>>>>>>>>>>>>>>>>> Systemadministrator
>>>>>>>>>>>>>>>>> TAO Beratungs- und Management GmbH | Lendplatz 45 | A -
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> 8020 Graz
>>>>>>>>>>>> Mail/XMPP: sven.schwedas at tao.at | +43 (0)680 301 7167
>>>>>>>>>>>>>>>> <%2B43%20%280%29680%20301%207167>
>>>>>>>>>>> http://software.tao.at
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> To unsubscribe from this list go to the following URL
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> and read the
>>>>>>>>>>>> instructions:  https://lists.samba.org/mailman/options/samba
>>>>>>>>>>>>>>>>>    --
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> To unsubscribe from this list go to the following URL
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> and read the
>>>>>>>>>>>> instructions:  https://lists.samba.org/mailman/options/samba
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>     No the samba from backports is not 3.6.6, it is (at the
>>>>>>>>>>>>>> moment) 4.1.11
>>>>>>>>>>>> To install it, you would use:
>>>>>>>>>>>>> apt-get -t wheezy-backports install samba
>>>>>>>>>>>>>
>>>>>>>>>>>>> Rowland
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> To unsubscribe from this list go to the following URL and read
>>>>>>>>>>>>>
>>>>>>>>>>>> the
>>>>>>>>>>> instructions:  https://lists.samba.org/mailman/options/samba
>>>>>>>>>>>>>
>>>>>>>>>>>>   --
>>>>>>>>>>> To unsubscribe from this list go to the following URL and read the
>>>>>>>>>>> instructions:  https://lists.samba.org/mailman/options/samba
>>>>>>>>>>>
>>>>>>>>>>>
Hi, this is what I use to install samba from backports:

apt-get -t wheezy-backports install samba attr krb5-config krb5-user ntp 
bind9utils dnsutils winbind libpam-winbind libpam-krb5 libnss-winbind 
libsmbclient smbclient

Rowland



More information about the samba mailing list