[Samba] Samba + CUPS
José Eduardo S. C. Xavier
josescxavier at gmail.com
Mon Oct 20 09:35:34 MDT 2014
I also tried that: http://pastebin.com/Kea0xCTy
2014-10-20 16:33 GMT+01:00 Sébastien Le Ray <sebastien-samba at orniz.org>:
> apt-get -t wheezy-backports install winbind
>
> Regards
> Le 20/10/2014 17:26, José Eduardo S. C. Xavier a écrit :
>
>> It now fails with the following error: http://pastebin.com/CE5386Mh
>> When I do sudo apt-get install winbind there is a reference to a 3.6.6
>> version of it:
>>
>> pi at lynx ~ $ sudo apt-get install winbind
>> Reading package lists... Done
>> Building dependency tree
>> Reading state information... Done
>> Some packages could not be installed. This may mean that you have
>> requested an impossible situation or if you are using the unstable
>> distribution that some required packages have not yet been created
>> or been moved out of Incoming.
>> The following information may help to resolve the situation:
>>
>> The following packages have unmet dependencies:
>> winbind : Depends: libwbclient0 (= 2:3.6.6-6+deb7u4) but
>> 2:4.1.11+dfsg-1~bpo70+1 is to be installed
>> Depends: samba-common (= 2:3.6.6-6+deb7u4) but
>> 2:4.1.11+dfsg-1~bpo70+1 is to be installed
>> Recommends: libpam-winbind but it is not going to be installed
>> Recommends: libnss-winbind but it is not going to be installed
>> E: Unable to correct problems, you have held broken packages.
>> pi at lynx ~ $
>>
>>
>>
>> 2014-10-20 16:18 GMT+01:00 José Eduardo S. C. Xavier <
>> josescxavier at gmail.com
>>
>>> :
>>> 2 days of compile process
>>> https://lists.samba.org/archive/samba-technical/2012-August/086330.html
>>> :s
>>>
>>> 2014-10-20 16:16 GMT+01:00 José Eduardo S. C. Xavier <
>>> josescxavier at gmail.com>:
>>>
>>> I can try to compile from source if you guide me on this process.
>>>
>>>> 2014-10-20 16:09 GMT+01:00 José Eduardo S. C. Xavier <
>>>> josescxavier at gmail.com>:
>>>>
>>>> How can I know If I it is installing the current version? saw someone
>>>>
>>>>> with a similar problem because have installed a armv7 package instead
>>>>> of a
>>>>> armv6.
>>>>>
>>>>> 2014-10-20 16:00 GMT+01:00 L.P.H. van Belle <belle at bazuin.nl>:
>>>>>
>>>>> ok, try the following.
>>>>>
>>>>>> 1) make a backup of /etc/samba /var/lib/samba /var/cache/samba
>>>>>>
>>>>>> 2
>>>>>> this removes and purges/clears all of samba
>>>>>> apt-get remove --purge `dpkg -l | grep samba | cut -f3 -d" "`
>>>>>>
>>>>>> if needed apt-get install mlocate
>>>>>> updatedb
>>>>>> locate samba
>>>>>> clear the rest of it.
>>>>>>
>>>>>> install backports samba again.
>>>>>>
>>>>>> Louis
>>>>>>
>>>>>>
>>>>>> ------------------------------
>>>>>> *Van:* José Eduardo S. C. Xavier [mailto:josescxavier at gmail.com]
>>>>>> *Verzonden:* maandag 20 oktober 2014 16:57
>>>>>> *Aan:* L.P.H. van Belle
>>>>>>
>>>>>> *CC:* samba at lists.samba.org
>>>>>> *Onderwerp:* Re: [Samba] Samba + CUPS
>>>>>>
>>>>>>
>>>>>> they look like for arm
>>>>>>
>>>>>> 2014-10-20 15:56 GMT+01:00 José Eduardo S. C. Xavier <
>>>>>> josescxavier at gmail.com>:
>>>>>>
>>>>>> pi at lynx ~ $ dpkg -l | grep samba
>>>>>>> ii python-samba
>>>>>>> 2:4.1.11+dfsg-1~bpo70+1 armhf Python bindings
>>>>>>> for
>>>>>>> Samba
>>>>>>> iF samba
>>>>>>> 2:4.1.11+dfsg-1~bpo70+1 armhf SMB/CIFS file,
>>>>>>> print,
>>>>>>> and login server for Unix
>>>>>>> ii samba-common
>>>>>>> 2:4.1.11+dfsg-1~bpo70+1 all common files
>>>>>>> used by
>>>>>>> both the Samba server and client
>>>>>>> ii samba-common-bin
>>>>>>> 2:4.1.11+dfsg-1~bpo70+1 armhf Samba common
>>>>>>> files
>>>>>>> used by both the server and the client
>>>>>>> ii samba-dsdb-modules
>>>>>>> 2:4.1.11+dfsg-1~bpo70+1 armhf Samba Directory
>>>>>>> Services Database
>>>>>>> ii samba-libs:armhf
>>>>>>> 2:4.1.11+dfsg-1~bpo70+1 armhf Samba core
>>>>>>> libraries
>>>>>>> ii samba-vfs-modules
>>>>>>> 2:4.1.11+dfsg-1~bpo70+1 armhf Samba Virtual
>>>>>>> FileSystem plugins
>>>>>>> pi at lynx ~ $
>>>>>>>
>>>>>>>
>>>>>>> 2014-10-20 15:55 GMT+01:00 José Eduardo S. C. Xavier <
>>>>>>> josescxavier at gmail.com>:
>>>>>>>
>>>>>>> I think the problem is that I'm running it on a raspberry pi (ARM)
>>>>>>>
>>>>>>>> and the source should be for x86/x64, no?
>>>>>>>>
>>>>>>>> 2014-10-20 15:54 GMT+01:00 L.P.H. van Belle <belle at bazuin.nl>:
>>>>>>>>
>>>>>>>> please post the output of :
>>>>>>>>
>>>>>>>>> dpkg -l | grep samba
>>>>>>>>> to make sure there is no old samba4 things.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> -----Oorspronkelijk bericht-----
>>>>>>>>>> Van: josescxavier at gmail.com
>>>>>>>>>> [mailto:samba-bounces at lists.samba.org] Namens José Eduardo S. C.
>>>>>>>>>>
>>>>>>>>> Xavier
>>>>>>>>>
>>>>>>>>>> Verzonden: maandag 20 oktober 2014 16:46
>>>>>>>>>> Aan: Rowland Penny
>>>>>>>>>>
>>>>>>>>> >CC: samba at lists.samba.org
>>>>>>>>>
>>>>>>>>>> Onderwerp: Re: [Samba] Samba + CUPS
>>>>>>>>>>
>>>>>>>>>> http://pastebin.com/Apr8HJPj it fails to run :s
>>>>>>>>>>
>>>>>>>>>> 2014-10-20 14:02 GMT+01:00 José Eduardo S. C. Xavier
>>>>>>>>>> <josescxavier at gmail.com
>>>>>>>>>>
>>>>>>>>>>> :
>>>>>>>>>>> lets try it :)
>>>>>>>>>>>
>>>>>>>>>>> 2014-10-20 13:37 GMT+01:00 Rowland Penny
>>>>>>>>>>>
>>>>>>>>>> <rowlandpenny at googlemail.com>:
>>>>>>>>>>
>>>>>>>>>>> On 20/10/14 13:27, José Eduardo S. C. Xavier wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> The samba from wheezy backports is the 3.6.6, right? it is
>>>>>>>>>>>>>
>>>>>>>>>>>> what I had
>>>>>>>>>>
>>>>>>>>>>> installed with sudo apt-get install samba.
>>>>>>>>>>>>>
>>>>>>>>>>>>> 2014-10-20 13:24 GMT+01:00 L.P.H. van Belle <belle at bazuin.nl>:
>>>>>>>>>>>>>
>>>>>>>>>>>>> stop..
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Dont install samba4.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Of use sernet-samba
>>>>>>>>>>>>>> or use samba from wheezy backports.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> samba4 is the most bad version.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> -----Oorspronkelijk bericht-----
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Van: josescxavier at gmail.com
>>>>>>>>>>>>>>> [mailto:samba-bounces at lists.samba.org] Namens José Eduardo
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> S. C.
>>>>>>>>>
>>>>>>>>>> Xavier
>>>>>>>>>>>>>>> Verzonden: maandag 20 oktober 2014 14:22
>>>>>>>>>>>>>>> Aan: Sven Schwedas
>>>>>>>>>>>>>>> CC: samba at lists.samba.org
>>>>>>>>>>>>>>> Onderwerp: Re: [Samba] Samba + CUPS
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I'm removing samba and install samba4 from apt-get to
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> try if it works.
>>>>>>>>>>
>>>>>>>>>>> 2014-10-20 13:19 GMT+01:00 Sven Schwedas <
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> sven.schwedas at tao.at>:
>>>>>>>>>
>>>>>>>>>> On 2014-10-20 14:13, José Eduardo S. C. Xavier wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>> I have configured a CUPS printer server with samba and it
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> worked with
>>>>>>>>>>>>>>>> Windows 7 32/64bits but now with windows 8 it can't get
>>>>>>>>>>>>>>>> the drivers.
>>>>>>>>>>>>>>>> I found it https://bugzilla.samba.org/show_bug.cgi?id=9474
>>>>>>>>>>>>>>>> but doesn't
>>>>>>>>>>>>>>>> know
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> how to use the patch to solve the problem. I'm using a
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> raspberry pi.
>>>>>>>>>>>>>>>> By updating to a more recent Samba version, as you were
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> instructed to on
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> the bugtracker.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>> Mit freundlichen Grüßen, / Best Regards,
>>>>>>>>>>>>>>>> Sven Schwedas
>>>>>>>>>>>>>>>> Systemadministrator
>>>>>>>>>>>>>>>> TAO Beratungs- und Management GmbH | Lendplatz 45 | A -
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 8020 Graz
>>>>>>>>>>
>>>>>>>>>>> Mail/XMPP: sven.schwedas at tao.at | +43 (0)680 301 7167
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> <%2B43%20%280%29680%20301%207167>
>>>>>>>>>
>>>>>>>>>> http://software.tao.at
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>> To unsubscribe from this list go to the following URL
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> and read the
>>>>>>>>>>
>>>>>>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> To unsubscribe from this list go to the following URL
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> and read the
>>>>>>>>>>
>>>>>>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> No the samba from backports is not 3.6.6, it is (at the
>>>>>>>>>>>>>>
>>>>>>>>>>>>> moment) 4.1.11
>>>>>>>>>>
>>>>>>>>>>> To install it, you would use:
>>>>>>>>>>>>
>>>>>>>>>>>> apt-get -t wheezy-backports install samba
>>>>>>>>>>>>
>>>>>>>>>>>> Rowland
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> To unsubscribe from this list go to the following URL and read
>>>>>>>>>>>>
>>>>>>>>>>> the
>>>>>>>>>
>>>>>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>> To unsubscribe from this list go to the following URL and read the
>>>>>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>
More information about the samba
mailing list