[Samba] Samba + CUPS
José Eduardo S. C. Xavier
josescxavier at gmail.com
Mon Oct 20 09:26:01 MDT 2014
It now fails with the following error: http://pastebin.com/CE5386Mh
When I do sudo apt-get install winbind there is a reference to a 3.6.6
version of it:
pi at lynx ~ $ sudo apt-get install winbind
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
winbind : Depends: libwbclient0 (= 2:3.6.6-6+deb7u4) but
2:4.1.11+dfsg-1~bpo70+1 is to be installed
Depends: samba-common (= 2:3.6.6-6+deb7u4) but
2:4.1.11+dfsg-1~bpo70+1 is to be installed
Recommends: libpam-winbind but it is not going to be installed
Recommends: libnss-winbind but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
pi at lynx ~ $
2014-10-20 16:18 GMT+01:00 José Eduardo S. C. Xavier <josescxavier at gmail.com
>:
> 2 days of compile process
> https://lists.samba.org/archive/samba-technical/2012-August/086330.html :s
>
> 2014-10-20 16:16 GMT+01:00 José Eduardo S. C. Xavier <
> josescxavier at gmail.com>:
>
> I can try to compile from source if you guide me on this process.
>>
>> 2014-10-20 16:09 GMT+01:00 José Eduardo S. C. Xavier <
>> josescxavier at gmail.com>:
>>
>> How can I know If I it is installing the current version? saw someone
>>> with a similar problem because have installed a armv7 package instead of a
>>> armv6.
>>>
>>> 2014-10-20 16:00 GMT+01:00 L.P.H. van Belle <belle at bazuin.nl>:
>>>
>>> ok, try the following.
>>>>
>>>> 1) make a backup of /etc/samba /var/lib/samba /var/cache/samba
>>>>
>>>> 2
>>>> this removes and purges/clears all of samba
>>>> apt-get remove --purge `dpkg -l | grep samba | cut -f3 -d" "`
>>>>
>>>> if needed apt-get install mlocate
>>>> updatedb
>>>> locate samba
>>>> clear the rest of it.
>>>>
>>>> install backports samba again.
>>>>
>>>> Louis
>>>>
>>>>
>>>> ------------------------------
>>>> *Van:* José Eduardo S. C. Xavier [mailto:josescxavier at gmail.com]
>>>> *Verzonden:* maandag 20 oktober 2014 16:57
>>>> *Aan:* L.P.H. van Belle
>>>>
>>>> *CC:* samba at lists.samba.org
>>>> *Onderwerp:* Re: [Samba] Samba + CUPS
>>>>
>>>> they look like for arm
>>>>
>>>> 2014-10-20 15:56 GMT+01:00 José Eduardo S. C. Xavier <
>>>> josescxavier at gmail.com>:
>>>>
>>>>> pi at lynx ~ $ dpkg -l | grep samba
>>>>> ii python-samba
>>>>> 2:4.1.11+dfsg-1~bpo70+1 armhf Python bindings for
>>>>> Samba
>>>>> iF samba
>>>>> 2:4.1.11+dfsg-1~bpo70+1 armhf SMB/CIFS file, print,
>>>>> and login server for Unix
>>>>> ii samba-common
>>>>> 2:4.1.11+dfsg-1~bpo70+1 all common files used by
>>>>> both the Samba server and client
>>>>> ii samba-common-bin
>>>>> 2:4.1.11+dfsg-1~bpo70+1 armhf Samba common files
>>>>> used by both the server and the client
>>>>> ii samba-dsdb-modules
>>>>> 2:4.1.11+dfsg-1~bpo70+1 armhf Samba Directory
>>>>> Services Database
>>>>> ii samba-libs:armhf
>>>>> 2:4.1.11+dfsg-1~bpo70+1 armhf Samba core libraries
>>>>> ii samba-vfs-modules
>>>>> 2:4.1.11+dfsg-1~bpo70+1 armhf Samba Virtual
>>>>> FileSystem plugins
>>>>> pi at lynx ~ $
>>>>>
>>>>>
>>>>> 2014-10-20 15:55 GMT+01:00 José Eduardo S. C. Xavier <
>>>>> josescxavier at gmail.com>:
>>>>>
>>>>> I think the problem is that I'm running it on a raspberry pi (ARM)
>>>>>> and the source should be for x86/x64, no?
>>>>>>
>>>>>> 2014-10-20 15:54 GMT+01:00 L.P.H. van Belle <belle at bazuin.nl>:
>>>>>>
>>>>>> please post the output of :
>>>>>>>
>>>>>>> dpkg -l | grep samba
>>>>>>> to make sure there is no old samba4 things.
>>>>>>>
>>>>>>>
>>>>>>> >-----Oorspronkelijk bericht-----
>>>>>>> >Van: josescxavier at gmail.com
>>>>>>> >[mailto:samba-bounces at lists.samba.org] Namens José Eduardo S. C.
>>>>>>> Xavier
>>>>>>> >Verzonden: maandag 20 oktober 2014 16:46
>>>>>>> >Aan: Rowland Penny
>>>>>>> >CC: samba at lists.samba.org
>>>>>>> >Onderwerp: Re: [Samba] Samba + CUPS
>>>>>>> >
>>>>>>> >http://pastebin.com/Apr8HJPj it fails to run :s
>>>>>>> >
>>>>>>> >2014-10-20 14:02 GMT+01:00 José Eduardo S. C. Xavier
>>>>>>> ><josescxavier at gmail.com
>>>>>>> >>:
>>>>>>> >
>>>>>>> >> lets try it :)
>>>>>>> >>
>>>>>>> >> 2014-10-20 13:37 GMT+01:00 Rowland Penny
>>>>>>> ><rowlandpenny at googlemail.com>:
>>>>>>> >>
>>>>>>> >>> On 20/10/14 13:27, José Eduardo S. C. Xavier wrote:
>>>>>>> >>>
>>>>>>> >>>> The samba from wheezy backports is the 3.6.6, right? it is
>>>>>>> >what I had
>>>>>>> >>>> installed with sudo apt-get install samba.
>>>>>>> >>>>
>>>>>>> >>>> 2014-10-20 13:24 GMT+01:00 L.P.H. van Belle <belle at bazuin.nl>:
>>>>>>> >>>>
>>>>>>> >>>> stop..
>>>>>>> >>>>>
>>>>>>> >>>>> Dont install samba4.
>>>>>>> >>>>>
>>>>>>> >>>>> Of use sernet-samba
>>>>>>> >>>>> or use samba from wheezy backports.
>>>>>>> >>>>>
>>>>>>> >>>>> samba4 is the most bad version.
>>>>>>> >>>>>
>>>>>>> >>>>>
>>>>>>> >>>>>
>>>>>>> >>>>> -----Oorspronkelijk bericht-----
>>>>>>> >>>>>> Van: josescxavier at gmail.com
>>>>>>> >>>>>> [mailto:samba-bounces at lists.samba.org] Namens José Eduardo
>>>>>>> S. C.
>>>>>>> >>>>>> Xavier
>>>>>>> >>>>>> Verzonden: maandag 20 oktober 2014 14:22
>>>>>>> >>>>>> Aan: Sven Schwedas
>>>>>>> >>>>>> CC: samba at lists.samba.org
>>>>>>> >>>>>> Onderwerp: Re: [Samba] Samba + CUPS
>>>>>>> >>>>>>
>>>>>>> >>>>>> I'm removing samba and install samba4 from apt-get to
>>>>>>> >try if it works.
>>>>>>> >>>>>>
>>>>>>> >>>>>> 2014-10-20 13:19 GMT+01:00 Sven Schwedas <
>>>>>>> sven.schwedas at tao.at>:
>>>>>>> >>>>>>
>>>>>>> >>>>>> On 2014-10-20 14:13, José Eduardo S. C. Xavier wrote:
>>>>>>> >>>>>>>
>>>>>>> >>>>>>>> Hi,
>>>>>>> >>>>>>>> I have configured a CUPS printer server with samba and it
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>> worked with
>>>>>>> >>>>>>
>>>>>>> >>>>>>> Windows 7 32/64bits but now with windows 8 it can't get
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>> the drivers.
>>>>>>> >>>>>>
>>>>>>> >>>>>>> I found it https://bugzilla.samba.org/show_bug.cgi?id=9474
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>> but doesn't
>>>>>>> >>>>>>
>>>>>>> >>>>>>> know
>>>>>>> >>>>>>>
>>>>>>> >>>>>>>> how to use the patch to solve the problem. I'm using a
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>> raspberry pi.
>>>>>>> >>>>>>
>>>>>>> >>>>>>> By updating to a more recent Samba version, as you were
>>>>>>> >>>>>>>
>>>>>>> >>>>>> instructed to on
>>>>>>> >>>>>>
>>>>>>> >>>>>>> the bugtracker.
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> --
>>>>>>> >>>>>>> Mit freundlichen Grüßen, / Best Regards,
>>>>>>> >>>>>>> Sven Schwedas
>>>>>>> >>>>>>> Systemadministrator
>>>>>>> >>>>>>> TAO Beratungs- und Management GmbH | Lendplatz 45 | A -
>>>>>>> >8020 Graz
>>>>>>> >>>>>>> Mail/XMPP: sven.schwedas at tao.at | +43 (0)680 301 7167
>>>>>>> <%2B43%20%280%29680%20301%207167>
>>>>>>> >>>>>>> http://software.tao.at
>>>>>>> >>>>>>>
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> --
>>>>>>> >>>>>>> To unsubscribe from this list go to the following URL
>>>>>>> >and read the
>>>>>>> >>>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> --
>>>>>>> >>>>>> To unsubscribe from this list go to the following URL
>>>>>>> >and read the
>>>>>>> >>>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>> >>>>>>
>>>>>>> >>>>>>
>>>>>>> >>>>> No the samba from backports is not 3.6.6, it is (at the
>>>>>>> >moment) 4.1.11
>>>>>>> >>> To install it, you would use:
>>>>>>> >>>
>>>>>>> >>> apt-get -t wheezy-backports install samba
>>>>>>> >>>
>>>>>>> >>> Rowland
>>>>>>> >>>
>>>>>>> >>>
>>>>>>> >>> --
>>>>>>> >>> To unsubscribe from this list go to the following URL and read
>>>>>>> the
>>>>>>> >>> instructions: https://lists.samba.org/mailman/options/samba
>>>>>>> >>>
>>>>>>> >>
>>>>>>> >>
>>>>>>> >--
>>>>>>> >To unsubscribe from this list go to the following URL and read the
>>>>>>> >instructions: https://lists.samba.org/mailman/options/samba
>>>>>>> >
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
More information about the samba
mailing list