[Samba] Samba + CUPS

[José Eduardo S. C. Xavier]

I think the problem is that I'm running it on a raspberry pi (ARM) and the
source should be for x86/x64, no?

2014-10-20 15:54 GMT+01:00 L.P.H. van Belle <belle at bazuin.nl>:

> please post the output of :
>
> dpkg -l | grep samba
> to make sure there is no old samba4 things.
>
>
> >-----Oorspronkelijk bericht-----
> >Van: josescxavier at gmail.com
> >[mailto:samba-bounces at lists.samba.org] Namens José Eduardo S. C. Xavier
> >Verzonden: maandag 20 oktober 2014 16:46
> >Aan: Rowland Penny
> >CC: samba at lists.samba.org
> >Onderwerp: Re: [Samba] Samba + CUPS
> >
> >http://pastebin.com/Apr8HJPj it fails to run :s
> >
> >2014-10-20 14:02 GMT+01:00 José Eduardo S. C. Xavier
> ><josescxavier at gmail.com
> >>:
> >
> >> lets try it :)
> >>
> >> 2014-10-20 13:37 GMT+01:00 Rowland Penny
> ><rowlandpenny at googlemail.com>:
> >>
> >>> On 20/10/14 13:27, José Eduardo S. C. Xavier wrote:
> >>>
> >>>> The samba from wheezy backports is the 3.6.6, right? it is
> >what I had
> >>>> installed with sudo apt-get install samba.
> >>>>
> >>>> 2014-10-20 13:24 GMT+01:00 L.P.H. van Belle <belle at bazuin.nl>:
> >>>>
> >>>>    stop..
> >>>>>
> >>>>> Dont install samba4.
> >>>>>
> >>>>> Of use sernet-samba
> >>>>> or use samba from wheezy backports.
> >>>>>
> >>>>> samba4 is the most bad version.
> >>>>>
> >>>>>
> >>>>>
> >>>>>  -----Oorspronkelijk bericht-----
> >>>>>> Van: josescxavier at gmail.com
> >>>>>> [mailto:samba-bounces at lists.samba.org] Namens José Eduardo S. C.
> >>>>>> Xavier
> >>>>>> Verzonden: maandag 20 oktober 2014 14:22
> >>>>>> Aan: Sven Schwedas
> >>>>>> CC: samba at lists.samba.org
> >>>>>> Onderwerp: Re: [Samba] Samba + CUPS
> >>>>>>
> >>>>>> I'm removing samba and install samba4 from apt-get to
> >try if it works.
> >>>>>>
> >>>>>> 2014-10-20 13:19 GMT+01:00 Sven Schwedas <sven.schwedas at tao.at>:
> >>>>>>
> >>>>>>  On 2014-10-20 14:13, José Eduardo S. C. Xavier wrote:
> >>>>>>>
> >>>>>>>> Hi,
> >>>>>>>> I have configured a CUPS printer server with samba and it
> >>>>>>>>
> >>>>>>> worked with
> >>>>>>
> >>>>>>> Windows 7 32/64bits but now with windows 8 it can't get
> >>>>>>>>
> >>>>>>> the drivers.
> >>>>>>
> >>>>>>> I found it https://bugzilla.samba.org/show_bug.cgi?id=9474
> >>>>>>>>
> >>>>>>> but doesn't
> >>>>>>
> >>>>>>> know
> >>>>>>>
> >>>>>>>> how to use the patch to solve the problem. I'm using a
> >>>>>>>>
> >>>>>>> raspberry pi.
> >>>>>>
> >>>>>>> By updating to a more recent Samba version, as you were
> >>>>>>>
> >>>>>> instructed to on
> >>>>>>
> >>>>>>> the bugtracker.
> >>>>>>>
> >>>>>>> --
> >>>>>>> Mit freundlichen Grüßen, / Best Regards,
> >>>>>>> Sven Schwedas
> >>>>>>> Systemadministrator
> >>>>>>> TAO Beratungs- und Management GmbH | Lendplatz 45 | A -
> >8020 Graz
> >>>>>>> Mail/XMPP: sven.schwedas at tao.at | +43 (0)680 301 7167
> >>>>>>> http://software.tao.at
> >>>>>>>
> >>>>>>>
> >>>>>>> --
> >>>>>>> To unsubscribe from this list go to the following URL
> >and read the
> >>>>>>> instructions:  https://lists.samba.org/mailman/options/samba
> >>>>>>>
> >>>>>>>  --
> >>>>>> To unsubscribe from this list go to the following URL
> >and read the
> >>>>>> instructions:  https://lists.samba.org/mailman/options/samba
> >>>>>>
> >>>>>>
> >>>>>  No the samba from backports is not 3.6.6, it is (at the
> >moment) 4.1.11
> >>> To install it, you would use:
> >>>
> >>> apt-get -t wheezy-backports install samba
> >>>
> >>> Rowland
> >>>
> >>>
> >>> --
> >>> To unsubscribe from this list go to the following URL and read the
> >>> instructions:  https://lists.samba.org/mailman/options/samba
> >>>
> >>
> >>
> >--
> >To unsubscribe from this list go to the following URL and read the
> >instructions:  https://lists.samba.org/mailman/options/samba
> >
>
>